Revision as of 04:33, 14 January 2012

The A15 is a 1488cc) engine produced from 1979 through 2209 (it is for sale in the 2009 Nissan C22 Vanette in Malaysia). The stroke was increased by 5 mm from the A14 engine's 77 mm to measure 82 mm. It produces 85hp. It used a different block casting but the same "tall-block" deck height as the A14. In the Roadstar it is capable of 49 mpg (17,3 km/L). A fuel injected version of the A15 (A15E) was offered in Asian markets.

[hide]

1 Identification
2 Horsepower
3 A14 vs A15
4 Applications
5 Nissan Malaysia
6 Photo Index

Identification

A15 ID Mark

Notice how the block extends above the timing cover by about 1 inch

Horsepower

From 67 to 80 HP

USA A15 lo-power fuel economy version Engine Family A140F

A14 vs A15

A15 uses the second A14 block casting (same block as A14):

11010-H9700 A14/A15 BARE BLOCK 76mm/2.99" bore size
- Bore: 76 mm
- Stroke A15: 82mm
- Stroke A14: 77mm
- Pin Height: The A15 piston has a 30mm pin to crown height, while the A14 has a 32.5mm height

Earlier A14 blocks were slightly different. The A15 oil pan has slight bumps in the side to allow the larger crank to swing without touch the pan sides.