![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 06:06, 2 January 2012 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 06:51, 2 January 2012 ddgonzal (Talk | contribs) (->S15 6-speed) Next diff -> |
||
| Line 2: | Line 2: | ||
| = S15 6-speed = | = S15 6-speed = | ||
| - | The 1999-2002 Nissan [[Silvia]] S15 Strawberry with SR20DE/SR20DET had an optional close-ratio 5-speed + overdrive (6 forward speeds total). In AUS, the six-speed was in the S15 Spec-R model. | + | The 1999-2002 Nissan [[Silvia]] S15 Strawberry with SR20DE/SR20DET had an optional close-ratio 5-speed + overdrive (6 forward speeds total). In AUS, the six-speed was in the Nissan 200SX Spec-R model. |
| S15 modified; A-series bell grafted on | S15 modified; A-series bell grafted on | ||
| <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=19983 http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/uploads/photos/19983.jpg] | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=19983 http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/uploads/photos/19983.jpg] | ||
| - | * FS6R92A [[92-Series Transmission]] | + | * FS6R92A |
| * only 16kg heavier than a standard 1200 4spd | * only 16kg heavier than a standard 1200 4spd | ||
| * 1st: 3.630 | * 1st: 3.630 | ||
| Line 34: | Line 34: | ||
| * 30100-85F00 9901-0011 | * 30100-85F00 9901-0011 | ||
| * 30100-85F14 0011- | * 30100-85F14 0011- | ||
| - | + | * Spline O.D.: 1" | |
| - | + | ||
| - | Is it the same splines as the S14 240SX 5-speed? | + | |
| - | * O.D.: 1" | + | |
| * Spline: 24 teeth | * Spline: 24 teeth | ||
| Line 44: | Line 41: | ||
| == Input Shaft Length == | == Input Shaft Length == | ||
| How far does the FS6R92A input shaft extend past the transmission face? | How far does the FS6R92A input shaft extend past the transmission face? | ||
| + | |||
| + | * 5-speed: about 17mm past the flange | ||
| + | * 6-speed: about 10mm inside the flange | ||
| + | |||
| + | == Speedometer == | ||
| + | S15 6-speed does not have a speedometer gear. | ||
| + | |||
| + | == Clutch Release== | ||
| + | How to connect up the clutch? | ||
| [[Category:Transmission]] | [[Category:Transmission]] | ||
Revision as of 06:51, 2 January 2012
6-speed transmission gives you two (count 'em 2) overdrive gears. Or some have a close ratio direct-5th with overdrive, which is better for performance. 6-speeds can be modified to fit Datsun 1200. Just cut the bellhousing and weld on a fragment of A-series bell housing, then machine the input shaft smaller.
Contents |
S15 6-speed
The 1999-2002 Nissan Silvia S15 Strawberry with SR20DE/SR20DET had an optional close-ratio 5-speed + overdrive (6 forward speeds total). In AUS, the six-speed was in the Nissan 200SX Spec-R model.
S15 modified; A-series bell grafted on
- FS6R92A
- only 16kg heavier than a standard 1200 4spd
- 1st: 3.630
- 2nd: 2.200
- 3rd: 1.543
- 4th: 1.210
- 5th: 1.000
- 6th: 0.767
Pilot Bushing
S15 5-speed FS6R92A
- 32202-B9500 BUSHING-CRANKSHAFT
- used on L, Z, VG, VQ, SR, KA, and CD engines (same as 71C bushing)
- Pilot Bushing Inside Diameter: 0.626 to .6300" (Length: .689")
- Pilot Bushing Outside Diameter: .814 to .815"
Since this is much larger in diamter than the A-series, machining is needed.
A-series crankshaft bore is for a bushing with 0.671" O.D., length .723"
- The FS6R92A input shaft end can be turned down to ~.671 O.D.
- Could the A-series crank pilot hole be bored out to .814" so the 71-Series bush can be fitted?
Clutch Disc
FS6R92A clutch disc [all 240mm]
- 30100-85F00 9901-0011
- 30100-85F14 0011-
- Spline O.D.: 1"
- Spline: 24 teeth
There is an A-series clutch disc that is 1" x 24T: 30100-K0500.
Input Shaft Length
How far does the FS6R92A input shaft extend past the transmission face?
- 5-speed: about 17mm past the flange
- 6-speed: about 10mm inside the flange
Speedometer
S15 6-speed does not have a speedometer gear.
Clutch Release
How to connect up the clutch?