A12GX Part Numbers

(Difference between revisions)

Revision as of 08:20, 2 November 2007

GX unique parts

Also see:

• A12GX Engine
• Hitachi Twin Carb

Cylinder Head and Valve Cover

• 13264-H2300 COVER ASS'Y-valve rocker GX
• 11041-H2300 HEAD ASS'Y-cylinder GX
• 11041-H2301 HEAD ASS'Y-cylinder (from '73-3)
• 13212-H2310 GUIDE-valve, intake GX
• 13213-H2310 GUIDE-valve, exhaust GX
• 08213-82810 STUD-manifold (same as standad, but with 2 extra studs)
• 11044-H2300 GASKET-cylinder head GX
• 11044-H2325 GASKET-cylinder head GX (from '72-6)
• 11045-H2300 RING "O" (from '72-6, goes with new type head gasket)
• 11056-H2301 BOLT-cylinder head (9 total)
• 11057-H2301 BOLT-cylinder head, center (1 total)

Manifold

• 1 14003-H2330 MANIFOLD-intake
• 2 00933-11800 PLUG-welch 2
• 3 00933-12000 PLUG-welch 1
• 4 08931-30200 PLUG-taper 1
• 5 14059-H2300 CONNECTOR-water hose 1
• 6 08213-82810 STUD-carburetor fixing 4 (same as manifold-to-head studs)
• 7 14004-H2300 MANIFOLD-exhaust
• 8 08213-82800 STUD-fixing exhaust tube 3
• 9 08911-10810 NUT-fixing manifold 11
• 10 08915-13810 WASHER-lock, fixing manifold 7
• 11 14037-32200 YOKE-manifold 4
• 12 14035-H2300 GASKET-manifold, (steel best)
• 13 14055-H2301 HOSE-manifold water
• 14 08723-12000 CLAMP-hose 2
• 15 14330-H2301 PLATE-heat shield
  • 14330-H2302 PLATE-heat shield (from '72-11)
• 16 16174-H2300 INSULATOR-carburetor 2
• 17 16175-A5100 GASKET-insulator 2
• 18 11810-A3500 VALVE ASS'Y-crank case emission control
• 19 11826-H2300 HOSE-rocker cover to control valve
• 20 16572-10801 CLAMP-hose
• 21 16572-H1000 CLAMP-hose

Carburetor

• 16010-H2332 CARBURETOR ASS'Y-twin, front
• 16010-H2334 CARBURETOR ASS'Y-twin, front (from '71-11)
• 16010-H2336 CARBURETOR ASS'Y-twin, front (from '73-1)
• 16010-H2333 CARBURETOR ASS'Y-twin, rear
• 16010-H2335 CARBURETOR ASS'Y-twin, rear (from '71-11)
• 16010-H2337 CARBURETOR ASS'Y-twin, rear (from '73-1)

• 1 16122-H2310 SHAFT ASS'Y-throttle
• 2 16324-H2310 FILTER ASS'Y-piston
• 3 16144-H2310 NUT ASS'Y-idle adjusting

  16144-H2311 NUT ASS'Y-idle adjusting (from '71-11)

• 4 16145-H2310 SPRING-idle adjusting screw 2
• 5 16355-H2310 NOZZLE ASS'Y

  16355-H2310 NOZZLE ASS'Y (from '71-11)

• (6) 16127-H2310 PLATE ASS'Y-throttle adjusting, front
• 6 16127-H2311 PLATE ASS'Y-throttle adjusting, rear
• (7) 16277-H2312 LEVER ASS'Y-first idle, front
• 7 16277-H2313 LEVER ASS'Y-first idle, rear

  16277-H2315 LEVER ASS'Y-first idle, rear (from '71-11)

  16134-H2310 LEVER ASS'Y-throttle, front

• 8 16134-H2313 LEVER ASS'Y-throttle, rear
• 9 16083-58000 SLEEVE 2
• 10 16214-25610 NUT (8 radius) 2
• 11 16116-H2310 SLEEVE 2

Carburetor Linkage

• 4 16361-H2300 SHAFT ASS'Y-throttle
• 5 16376-H2300 BRACKET-accelerator cable
• 6 08915-13510 WASHER-lock,fixing accelerator cable bracket 2
• 7 08460-51000 SCREW-fixing accelerator cable bracket 2
• 8 16031-H2300 TUBE-over flow, front
• 9 16031-H2301 TUBE-over flow, rear

16031-15801 TUBE-over flow, (Vinyl 6 x 9 x 160) 2

Air Cleaner

• 1 16500-H2300 CLEANER ASS'Y-air (for twin)
• 2 16526-H2300 COVER ASS'Y-upper
• 3 16536-H2300 PACKING
• 4 16546-H2300 ELEMENT ASS'Y-paper
• 5 16528-H2300 COVER ASS'Y-lower
• 6 16536-H2300 PACKING
• 7 16523-12200 GASKET (carburetor to air cleaner) 2
• 8 16548-22000 PACKING
• 9 16568-08000 PACKING
• 10 16516-H2300 BOLT ASS'Y-center 2
• 11 08120-81662 BOLT (fixing air cleaner to carburetor) 4
• 12 11828-H2300 HOSE-air cleaner to pipe connector
• 13 16572-H1000 CLAMP-hose

  16572-10801 CLAMP-hose

AIR CLEANER (HOT AIR TYPE) - Optional

• 16500-H2310 CLEANER ASS'Y-air
• 14 16590-H2310 COVER-manifold
• 15 16530-H2310 DUCT-cover to air cleaner
• 16 14896-C0600 BAND-hose

Fuel Piping

• 14 17523-H2302 TUBE-fuel pump to carburetor
• 15 17106-H2300 CLAMP-fuel tube
• 16 17107-H2300 CLAMP-fuel tube
• 17 17108-H2300 CLAMP-fuel tube
• 18 08740-08020 HOSE-fuel (l=80mm) 3
• 19 08723-11400 CLAMP-hose 6

Fuel Pump

• 17010-H2302 PUMP ASS'Y-fuel GX
• 17010-H2303 PUMP ASS'Y-fuel (ISO hose) (from '71-11) GX