User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Anti-diesel valve

(Difference between revisions)

Datsun 1200 encyclopedia | Recent changes | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision
Category: Fuel System

Revision as of 08:04, 20 July 2010
ddgonzal (Talk | contribs)
(->Part Numbers)
<- Previous diff
Revision as of 02:33, 29 January 2012
ddgonzal (Talk | contribs)

Next diff ->
Line 1: Line 1:
-Starting with 1973 USA models, the anti-deiseling valve was added. This is an idle-circuit cutoff solenoid. As soon as the key is turned off, the engine dies.+Starting with 1973 USA models, the anti-dieseling valve was added. This is an idle-circuit cutoff solenoid. As soon as the key is turned off, the engine dies.
- +
 += Overview =
 +Anti-Diesel solenoid valve comes on some 1973 and newer carbs.
[http://datsun1200.com/modules/myalbum/photo.php?lid=1006 http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/modules/myalbum/photos/1006.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=1006 http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/modules/myalbum/photos/1006.jpg]
-<br>Anti-Diesel solenoid valve (some 1973 and newer carbs) 
- 
= Wiring = = Wiring =
- 
* Yellow wire - fuel cut solenoid To general IG circuit (hot when key is Run or Start) * Yellow wire - fuel cut solenoid To general IG circuit (hot when key is Run or Start)
-[http://datsun1200.com/modules/myalbum/photo.php?lid=15572 http://datsun1200.com/modules/myalbum/photos/15572.jpg]+[http://datsun1200.com/modules/myalbum/photo.php?lid=15572 http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/modules/myalbum/photos/15572.jpg]
= Troubleshooting = = Troubleshooting =
- +* Turn the key to IGN, engine OFF. Then unplug the connector at the valve (under the engine). Does the Anti-disel valve have 12V at the wiring connector?
-* Turn the key to IGN. Then unplug the connector at the valve (under the engine). Does the Anti-disel valve have 12V at the wiring connector?+
*: [http://datsun1200.com/modules/myalbum/photo.php?lid=1006 http://datsun1200.com/modules/myalbum/photos/thumbs/1006.jpg] *: [http://datsun1200.com/modules/myalbum/photo.php?lid=1006 http://datsun1200.com/modules/myalbum/photos/thumbs/1006.jpg]
-** test to see if you have power ay the plug that the solenoid connects to+*: test to see if you have power at the plug that the solenoid connects to
 + 
 +No: Check your fuses...trace the wires and see why it's not getting power
Yes: Have someone turn the ignition on & off while you listen carefully to hear the 'click' as it is turned on. Yes: Have someone turn the ignition on & off while you listen carefully to hear the 'click' as it is turned on.
-* No click? Remove the solenoid from the carb and take out the 'pin' in the middle & refit the main body of the solenoid. Start engine to see if all is well. If this fixes it, then repair wiring or replace solenoid with a working one.+* No click? Bypass the valve (as below). If this allows the engine to idle correctly, then repair the wiring or replace the solenoid with a working one.
 += Bypassing the Anti-Diesel Valve =
 +Unscrew the solenoid from the carburetor and take out the 'pin' in the middle. Then re-install the solenoid. Start engine to see if all is well.
-No: Check your fuses...trace the wires and see why it's not getting power+It will no longer 'cut' the engine immediately, but otherwise the engine will run well with this pin removed.
= Part Numbers = = Part Numbers =
Line 29: Line 30:
* 16916-H7011 VALVE-ANTI DIESELING SOLENOID 1172- [USA B110 ] * 16916-H7011 VALVE-ANTI DIESELING SOLENOID 1172- [USA B110 ]
* 16916-H5002 VALVE-anti-dieseling solenoid [JDM B210 DCH306-2] * 16916-H5002 VALVE-anti-dieseling solenoid [JDM B210 DCH306-2]
- 
Aftermarket Anti-Diesel valve Aftermarket Anti-Diesel valve

Revision as of 02:33, 29 January 2012

Starting with 1973 USA models, the anti-dieseling valve was added. This is an idle-circuit cutoff solenoid. As soon as the key is turned off, the engine dies.

Contents

Overview

Anti-Diesel solenoid valve comes on some 1973 and newer carbs.

1006.jpg

Wiring

  • Yellow wire - fuel cut solenoid To general IG circuit (hot when key is Run or Start)

15572.jpg

Troubleshooting

  • Turn the key to IGN, engine OFF. Then unplug the connector at the valve (under the engine). Does the Anti-disel valve have 12V at the wiring connector?
    1006.jpg
    test to see if you have power at the plug that the solenoid connects to

No: Check your fuses...trace the wires and see why it's not getting power

Yes: Have someone turn the ignition on & off while you listen carefully to hear the 'click' as it is turned on.

  • No click? Bypass the valve (as below). If this allows the engine to idle correctly, then repair the wiring or replace the solenoid with a working one.

Bypassing the Anti-Diesel Valve

Unscrew the solenoid from the carburetor and take out the 'pin' in the middle. Then re-install the solenoid. Start engine to see if all is well.

It will no longer 'cut' the engine immediately, but otherwise the engine will run well with this pin removed.

Part Numbers

  • 16916-H7010 ASSY-CUT,FUEL 0772-1072 [USA B110 DCH306-4/DCH306-5]
  • 16916-H7011 VALVE-ANTI DIESELING SOLENOID 1172- [USA B110 ]
  • 16916-H5002 VALVE-anti-dieseling solenoid [JDM B210 DCH306-2]

Aftermarket Anti-Diesel valve

  • TOMCO 8134 $36
    • Chevy Luv Truck 1975-1980
    • Ford Courier Truck 1979-1980
    • Honda 1973-1976
    • Mazda 1975-1978
    • Datsun 1973-1983
    • Subaru 1974-1980