Revision as of 06:24, 27 February 2016 ddgonzal (Talk | contribs) <- Previous diff |
Current revision ddgonzal (Talk | contribs) (->Overview) |
||
Line 4: | Line 4: | ||
Bleeding the hydraulic brake system is an essential factor for regular brake servicing. | Bleeding the hydraulic brake system is an essential factor for regular brake servicing. | ||
- | 1. Top up the master cylinder reservoir with new brake fluid of the [[Fluids|recommended type]]. DO NOT REUSE BRAKE FLUID | + | # Top up the master cylinder reservoir with new brake fluid of the [[Fluids|recommended type]]. DO NOT REUSE BRAKE FLUID |
- | + | # Start with the far rear wheel cylinder. Thoroughly wipe from the bleeder screw any mud or dust present, so that the outlet hole is free from foreign matter | |
- | 2. Start with the far rear wheel cylinder. Thoroughly wipe from the bleeder screw any mud or dust present, so that the outlet hole is free from foreign matter | + | # Attach a vinyl hose to the wheel cylinder bleeder screw. Dip the end of the vinyl hose in a jar containing some brake fluid |
- | + | # Crack open the bleeder screw | |
- | 3. Attach a vinyl hose to the wheel cylinder bleeder screw. Dip the end of the vinyl hose in a jar containing some brake fluid | + | # Depress the brake pedal two or three times. Dirty (old) brake fluid should appear in the jar |
- | + | # Check the master cylinder and top up as necessary. | |
- | 4. Crack open the bleeder screw | + | # Repeat steps 5 and 6 until clean fluid comes out. Then close the bleeder screw. |
- | + | # Repeat for the other rear brake, and then for each front wheel. | |
- | 5. Depress the brake pedal two or three times. Dirty (old) brake fluid should appear in the jar | + | |
- | + | ||
- | 6. Check the master cylinder and top up as necessary. | + | |
- | + | ||
- | 7. Repeat steps 5 and 6 until clean fluid comes out. Then close the bleeder screw. | + | |
- | + | ||
- | 8. Repeat for the other rear brake, and then for each front wheel. | + | |
CAUTION: If the master cylinder is allowed to run empty, do a [[Brake Bleeding|full brake bleeding operation]]. | CAUTION: If the master cylinder is allowed to run empty, do a [[Brake Bleeding|full brake bleeding operation]]. | ||
[[Category:Brake System]] | [[Category:Brake System]] |
Current revision
The Periodical Maintenance and Lubrication Schedule calls for replacing the brake fluid every 24 months/24,000 miles.
[edit]
Overview
Bleeding the hydraulic brake system is an essential factor for regular brake servicing.
- Top up the master cylinder reservoir with new brake fluid of the recommended type. DO NOT REUSE BRAKE FLUID
- Start with the far rear wheel cylinder. Thoroughly wipe from the bleeder screw any mud or dust present, so that the outlet hole is free from foreign matter
- Attach a vinyl hose to the wheel cylinder bleeder screw. Dip the end of the vinyl hose in a jar containing some brake fluid
- Crack open the bleeder screw
- Depress the brake pedal two or three times. Dirty (old) brake fluid should appear in the jar
- Check the master cylinder and top up as necessary.
- Repeat steps 5 and 6 until clean fluid comes out. Then close the bleeder screw.
- Repeat for the other rear brake, and then for each front wheel.
CAUTION: If the master cylinder is allowed to run empty, do a full brake bleeding operation.