User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Chassis Lube

From Datsun 1200 Club

Datsun 1200 encyclopedia | Recent changes | Edit this page | Page history | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy
Categories: Front Axle And Front Suspension | Propeller Shaft And Differential Carrier

Chassis Lube or "Grease job" should be done every 12 months.

  1. Driveshaft (tailshaft) - both u-joints
    • Most driveshafts have sealed joints. Some are replaceable, can be removed and repacked.
    • Some have non-replaceable joints.
  2. Steering Linkage
    • 4 side rod ends
    • both ends of Cross Rod
  3. Ball Joints, one each side at front wheels

19475.jpgAlbum click to view

Unfortunately many after market cheap aftermarket manufactured joints are non-greasable types.

And many just have a plug - no grease-gun nipple. However, you can simply remove the plug and put a nipple on it, and then can grease it.

Zerk-type grease fittings, deluxe (with covers)
d81012295kojiya_2006-img581x405-119.jpg

grease fitting, grease nipple, Zerk fitting, Alemite fitting

Retrieved from "http://datsun1200.com/modules/mediawiki/index.php?title=Chassis_Lube"

This page has been accessed 5,801 times. This page was last modified 10:02, 30 July 2016. Content is available under Datsun 1200 Club.