![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 19:28, 8 April 2013 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 19:42, 8 April 2013 ddgonzal (Talk | contribs) (->Overview) Next diff -> |
||
| Line 2: | Line 2: | ||
| = Overview= | = Overview= | ||
| + | Both cables are the same length (800mm), they are identicle except for the aluminium end that slips into the gearbox. The larger of the two cables is 25mm and the other is about 18mm. You can also fit a washer if using the small cable in a large-hole transmission. | ||
| + | |||
| [http://datsun1200.com/modules/myalbum/photo.php?lid=19050 cable] | [http://datsun1200.com/modules/myalbum/photo.php?lid=19050 cable] | ||
| <br><img size=400>http://datsun1200.com/uploads/photos/19050.jpg</img> [http://datsun1200.com/modules/myalbum/photo.php?lid=16770 http://datsun1200.com/uploads/thumbs/16770.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=14713 http://datsun1200.com/uploads/thumbs/14713.jpg] | <br><img size=400>http://datsun1200.com/uploads/photos/19050.jpg</img> [http://datsun1200.com/modules/myalbum/photo.php?lid=16770 http://datsun1200.com/uploads/thumbs/16770.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=14713 http://datsun1200.com/uploads/thumbs/14713.jpg] | ||
| Line 13: | Line 15: | ||
| [http://datsun1200.com/modules/myalbum/photo.php?lid=20527 cable] | [http://datsun1200.com/modules/myalbum/photo.php?lid=20527 cable] | ||
| <br>http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/album/20527.jpg | <br>http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/album/20527.jpg | ||
| + | |||
| + | = Removal = | ||
| + | 1. Loosen the locknut, then unthread the nut. These are the two 17mm nuts on the clutch cable at the firewall. | ||
| + | |||
| + | 2. Pull the cable end off the Clutch Fork Arm | ||
| = Part Numbers = | = Part Numbers = | ||
Revision as of 19:42, 8 April 2013
RHD 1200 used a clutch cable while LHD versions used a Hydraulic clutch linkage.
Overview
Both cables are the same length (800mm), they are identicle except for the aluminium end that slips into the gearbox. The larger of the two cables is 25mm and the other is about 18mm. You can also fit a washer if using the small cable in a large-hole transmission.
Removal
1. Loosen the locknut, then unthread the nut. These are the two 17mm nuts on the clutch cable at the firewall.
2. Pull the cable end off the Clutch Fork Arm
Part Numbers
25 mm hole in transmission, all 1200 including all utes
30670-H1001 CABLE ASS'Y-clutch operating B110
30670-G1600 7510-8304 B120
30670-G1601 8305-8910 B120
30670-G1500 8910- B120
* small clutch cable hole in transmission [83 cm length]
1-inch (25mm) clutch cable hole in transmission - B210 30670-H5001 CABLE ASS'Y-clutch operating B210 all * EXCEPT: 63-series transmission JDM used hydraulic clutch 30670-M5001 Quinton Hazel QCC.1076
30670-H8500 -7909 B310 [bracket, no nut] 30670-H8510 7909- B310, 8110- Van 30670-H9100 BC2052
Length 30670-H1001 750 mm or 830 mm 30670-H5001 30670-H8500 30670-H8510 770 mm 30670-H9100 1982-1986 Stanza CA20 * 40.25 inches BECK/ARNLEY 0930558 ATP Y348 #30670D2801 DORMAN 14850 {TECHoice}
1983 Sentra E15 * 29.5 inches BECK/ARNLEY 0930556 ATP Y327 {#3067004A00} DORMAN 14849 {TECHoice}