![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 04:20, 14 March 2010 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 19:58, 5 March 2011 ddgonzal (Talk | contribs) (->Front Crossmember) Next diff -> |
||
| Line 16: | Line 16: | ||
| <br>Suitable for 1974-up A12, A13, A14 or A15 | <br>Suitable for 1974-up A12, A13, A14 or A15 | ||
| + | |||
| + | Modified | ||
| + | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=14316 http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/modules/myalbum/photos/14316.jpg] | ||
| B210 vs B110 | B210 vs B110 | ||
| Line 44: | Line 47: | ||
| [http://datsun1200.com/modules/myalbum/photo.php?lid=4921 http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/modules/myalbum/photos/4921.jpg] | [http://datsun1200.com/modules/myalbum/photo.php?lid=4921 http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/modules/myalbum/photos/4921.jpg] | ||
| + | = Measurements = | ||
| + | Front engine crossmember bolts | ||
| + | * 11 mm holes | ||
| + | * 8 mm forward of strut centerline | ||
| + | * 60 mm front-to-rear spacing | ||
| + | * 656 mm left-to-right | ||
| + | * 405 mm from rear bolt to Front core support mounting hole | ||
| + | |||
| + | Strut Tower to Strut Tower centers | ||
| + | * 936 mm width | ||
| + | |||
| + | [http://datsun1200.com/modules/myalbum/photo.php?lid=22877 http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/modules/myalbum/photos/22877.jpg] | ||
| = Rear Crossmember = | = Rear Crossmember = | ||
Revision as of 19:58, 5 March 2011
Engine mounting xmember x-member cross-member
Also see: Engine Mounts (for rubber insulators and engine brackets)
Contents |
Front Crossmember
Rear: Late 1200 crossmember
Front: Early 1200 crossmember
The engine crossmember for the Datsun 1200 fits the 1971-1973 A12 engine. The A10 engine from the earlier Datsun 1000 will also bolt in. To fit a newer engine -- a 1974-up A12 or A13, A14 or A15, a newer crossmember may be used (or an adaptation of motor mounts may be fabricated). The newer crossmember is from the 1974-up Datsun 1200 truck. Note that B210 or other crossmembers do not fit the 1200.
For engine types other than A-series, see: Engine Swaps
Early A12 ute vs. Late A12 ute
Suitable for 1974-up A12, A13, A14 or A15
Modified
B210 vs B110
B210 is slighty wider, and of course has late style mounts.
Part Numbers
フロント サスペンシヨン メンバー
B110 & early B120
- 54401-H3900 MEMBER ASS'Y-front suspension
- 08194-06510 BOLT (4)
- 32886-22000 WASHER-body bolt (8)
- 08915-14010 WASHER-lock (4)
- 08911-54010 NUT (4)
- 54401-H1000 [early part, interchangable with -H3900]
- 81-94065-1 BOLT (4)
- 32886-22000 WASHER-body bolt (8)
- 89-15140-1 WASHER-lock (4)
- 89-11540-1 NUT (4)
Late B120
- 54401-G1601 MEMBER ASSY-FRONT SUSPENSION 8504-
- replaced 54401-G1600 MEMBER ASSY-FRONT SUSPENSION 7510-8503
Measurements
Front engine crossmember bolts
- 11 mm holes
- 8 mm forward of strut centerline
- 60 mm front-to-rear spacing
- 656 mm left-to-right
- 405 mm from rear bolt to Front core support mounting hole
Strut Tower to Strut Tower centers
- 936 mm width
Rear Crossmember
See main article: Gearbox Mount
The transmission crossmember (gearbox crossmember) is also called the rear engine crossmember.
- 11322-H1002 MEMBER-engine mounting, rear