![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 09:25, 1 May 2015 ddgonzal (Talk | contribs) (->Chrome Trim) <- Previous diff |
Current revision ddgonzal (Talk | contribs) (->Chrome Trim) |
||
| Line 1: | Line 1: | ||
| - | All 1200s except [[Body Styles|Standard trim]] included roof rain drip rails. | + | [[Roof]] drip rails keep rain off the top of the doors. |
| - | Also see [[Body Side Trim Part Numbers]] | + | {{Album|25758}} |
| - | = Removing = | + | = Panels = |
| - | [http://datsun1200.com/modules/myalbum/photo.php?lid=14606 shaved rail] | + | The drip rails (drip mouldings) are actually part of the Body Side panels, where the roof attaches to the side. |
| - | <br><img size=400>http://datsun1200.com/uploads/photos/14606.jpg</img> | + | |
| + | Also see [[Body Side Part Numbers]] | ||
| + | |||
| + | ASSY-FRONT PILLAR | ||
| + | ASSY-RAIL ROOF SIDE OUTER | ||
| + | PANEL-RAIL ROOF SIDE INNER | ||
| + | |||
| + | {{Photo!|121-01a.jpg|Datsun%201200/1973%20Catalog}} | ||
| + | |||
| + | == Removing == | ||
| + | [http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=32610 discussion] | ||
| + | |||
| + | You need good door rubbers that seal real good -- the water runs off the side down the side windows instead of in the drain and then down the front or back. Just grind where the spot welds are inside the door opening. and the whole rail will come off. To regain strength, weld the roof skin to the car the full length. | ||
| + | |||
| + | shaved rail | ||
| + | <br>{{Album|14606}} | ||
| + | |||
| + | 2332's Sunny Truck | ||
| + | <br>{{Album|13948}} | ||
| + | |||
| + | {{Album|14547}} | ||
| + | |||
| + | flyby's sedan | ||
| + | <br>{{Album|5974}} | ||
| = Chrome Trim = | = Chrome Trim = | ||
| - | <br><img size=400>http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/USA/122-01.jpg</img> | + | All 1200s except [[Body Styles|Standard trim]] included chrome trim over the roof rain drip rails. |
| + | |||
| + | 73800-H1801 SET-MOULDING ROOF DRIP RH COUPE | ||
| + | 73801-H1801 SET-MOULDING ROOF DRIP LH COUPE | ||
| + | |||
| + | 73800-H1100 SET-MOULDING ROOF DRIP SEDAN 4-DOOR | ||
| + | * Only the rear piece differs from 4-dr to 2-dr | ||
| + | 73800-H1300 SET-MOULDING ROOF DRIP SEDAN 2-DOOR | ||
| + | |||
| + | Also see [[Body Side Trim Part Numbers]] | ||
| + | |||
| + | {{Photo!|122-01.jpg|Datsun%201200/USA}} | ||
| SET-MOULDING ROOF DRIP RH | SET-MOULDING ROOF DRIP RH | ||
| SET-MOULDING ROOF DRIP LH | SET-MOULDING ROOF DRIP LH | ||
| - | Each set consist of | + | Each set consists of: |
| MOULDING-ROOF DRIP FRONT | MOULDING-ROOF DRIP FRONT | ||
| Line 20: | Line 54: | ||
| To install, place it on the top edge, then snap it down onto the bottom edge | To install, place it on the top edge, then snap it down onto the bottom edge | ||
| - | <br><img size=400>http://datsun1200.com/uploads/photos/25758.jpg</img> :[http://datsun1200.com/modules/myalbum/photo.php?lid=25758 full] | + | <br>{{Album|25758}} |
| <br>Depress downward after hooking the top | <br>Depress downward after hooking the top | ||
| To remove, pull bottom edge out, which will snap it off the rail. | To remove, pull bottom edge out, which will snap it off the rail. | ||
| - | [[Category:Body]] | + | {{End}} [[Category:Body]] |
Current revision
Roof drip rails keep rain off the top of the doors.
Panels
The drip rails (drip mouldings) are actually part of the Body Side panels, where the roof attaches to the side.
Also see Body Side Part Numbers
ASSY-FRONT PILLAR ASSY-RAIL ROOF SIDE OUTER PANEL-RAIL ROOF SIDE INNER
Removing
You need good door rubbers that seal real good -- the water runs off the side down the side windows instead of in the drain and then down the front or back. Just grind where the spot welds are inside the door opening. and the whole rail will come off. To regain strength, weld the roof skin to the car the full length.
shaved rail
2332's Sunny Truck
flyby's sedan
Chrome Trim
All 1200s except Standard trim included chrome trim over the roof rain drip rails.
73800-H1801 SET-MOULDING ROOF DRIP RH COUPE 73801-H1801 SET-MOULDING ROOF DRIP LH COUPE
73800-H1100 SET-MOULDING ROOF DRIP SEDAN 4-DOOR * Only the rear piece differs from 4-dr to 2-dr 73800-H1300 SET-MOULDING ROOF DRIP SEDAN 2-DOOR
Also see Body Side Trim Part Numbers
SET-MOULDING ROOF DRIP RH SET-MOULDING ROOF DRIP LH
Each set consists of:
MOULDING-ROOF DRIP FRONT MOULDING-ROOF DRIP REAR CLIP-MOULDING ROOF DRIP [Center clip]
To install, place it on the top edge, then snap it down onto the bottom edge
Depress downward after hooking the top
To remove, pull bottom edge out, which will snap it off the rail.