![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 16:54, 12 July 2007 Ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 02:08, 9 March 2009 Ddgonzal (Talk | contribs) Next diff -> |
||
| Line 1: | Line 1: | ||
| - | #REDIRECT [[Fuel Injection]] | + | Some 1980-1982 Datsuns in Asia markets came with an OEM (factory) EFI system. Nissan called it "EGI" -- Electronic Gasoline Injection. This is the "rare as" A14E Injection motor. |
| + | |||
| + | [http://datsun1200.com/modules/myalbum/photo.php?lid=15095 http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/modules/myalbum/photos/15095.jpg] | ||
| + | |||
| + | <blockquote> | ||
| + | [http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=2304&forum=1 quote:]<hr>a friend of mine has a system that came on the A14 in the M10 Pulsars (very first ones). The set up he got came from Singapore<hr> | ||
| + | </blockquote> | ||
| + | |||
| + | The A14E engine came in: | ||
| + | * 1979-1981 [http://ja.wikipedia.org/wiki/%E6%97%A5%E7%94%A3%E3%83%BB%E3%83%A9%E3%83%B3%E3%82%B0%E3%83%AC%E3%83%BC Langley] (N10 Pulsar) -- Asian markets | ||
| + | * 1978-up Feb - [http://ja.wikipedia.org/wiki/%E6%97%A5%E7%94%A3%E3%83%BB%E3%82%B5%E3%83%8B%E3%83%BC Sunny 1400SGX-E] Coupe -- Asian markets | ||
| + | |||
| + | |||
| + | "A" series engines are [http://www.engine-museum.net/nissan/KAAZE/goods/KAAZE_goods1.html produced in Aichi Machine] held in Aichi plant. | ||
| + | |||
| + | |||
| + | Quite a large horsepower difference: | ||
| + | * A14E: 92 PS @ 6400 rpm, 11.7 kg-m @ 3600 rpm | ||
| + | * A14: 80 PS @ 6000 rpm, 10.2 kg-m @ 3600 rpm | ||
| + | |||
| + | [http://datsun1200.com/modules/myalbum/photo.php?lid=1100 http://datsun1200.com/modules/myalbum/photos/thumbs/1100.jpg]A14 EFI manifold | ||
| + | |||
| + | [http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=6580&forum=8 quote:]<blockquote><hr>SSS as I remember at one stage they had import carbie A15 engines for round $600 and injected A14 and A15 for around $800<hr></blockquote> | ||
| + | |||
| + | Reportedly, Nepean Sports classics in Castlereagh NSW was selling import motors. carlos' son ran one. These are fairly sought after by the rally guys as the narrow runners provide torque and the length also good top end, too small for a big A15 though. | ||
| + | |||
| + | These possibly came in later model [http://en.wikipedia.org/wiki/Nissan_Vanette Nissan Vanettes], the reason they seem rare is both my manifolds broke across the bottom of no's 1 & 2 inlet runner. Plus it suffers from reversion with a big cam. | ||
| + | |||
| + | These were also available in asian markets (Japan, Singapore, etc). | ||
| + | |||
| + | [http://hc.iruka.ne.jp/cgi-bin/m2/iruka.cgi quote:]<blockquote><hr> | ||
| + | *A14 EGI = HB310 (1978-1980) Type-GX & SGX | ||
| + | *A15 EGI = PB310 (1980-1981) Type-GX & SGX | ||
| + | |||
| + | As for the name in Japan, Nissan calls EGI and Toyota EFI. | ||
| + | |||
| + | Although the EGI system should excel Carburettors in the performance, old EGI is inferior to Carburettors.<hr></blockquote> | ||
| + | |||
| + | http://datsun1200.com/modules/myalbum/photos/thumbs/4217.jpg | ||
| + | [http://datsun1200.com/modules/myalbum/photo.php?lid=4217 A series injection manifold] | ||
| + | |||
| + | |||
| + | Discussions: | ||
| + | * [http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=12315&forum=1 My fuel injection system arrived] | ||
| + | * [http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=1490&forum=1 manifolds] | ||
| + | |||
| + | |||
| + | As you can see here, the setup is nearly identical to 1980 [[200SX EFI]] system: | ||
| + | <br>[http://i240.photobucket.com/albums/ff36/mampustaklayan/Image032-11.jpg http://ddgonzal.members.winisp.net/getThumb.aspx?width=480&uri=http://i240.photobucket.com/albums/ff36/mampustaklayan/Image032-11.jpg] | ||
| + | * This car is missing the air induction piping that goes across the radiator (see [[200SX EFI]] for layout and diagrams) | ||
| + | |||
| + | |||
| + | B310 Factory Setup | ||
| + | * [http://datsun1200.com/modules/myalbum/photo.php?lid=2408 http://datsun1200.com/modules/myalbum/photos/thumbs/2408.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=2409 http://datsun1200.com/modules/myalbum/photos/thumbs/2409.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=2410 http://datsun1200.com/modules/myalbum/photos/thumbs/2410.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=2411 http://datsun1200.com/modules/myalbum/photos/thumbs/2411.jpg] | ||
| + | |||
| + | == Performance == | ||
| + | This factory Nissan setup was designed for typical mass-market street performance. It is not a racing system. Expect better low-speed horsepower performance than a stock DCH306 carburetor (due to the longer runners), but the same peak horsepower. | ||
| + | |||
| + | <blockquote>[http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=1134&forum=1 Quote]<hr>A factory EFI setup imported from Japan was tried, and found to be much smoother, but ... restrictive above 6000rpm when used with the [racing] cam.<hr></blockquote> | ||
| + | |||
| + | == Photo Index == | ||
| + | |||
| + | [http://datsun1200.com/modules/myalbum/photo.php?lid=939 http://datsun1200.com/modules/myalbum/photos/thumbs/939.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=940 http://datsun1200.com/modules/myalbum/photos/thumbs/940.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=941 http://datsun1200.com/modules/myalbum/photos/thumbs/941.jpg] | ||
| + | [http://datsun1200.com/modules/myalbum/photo.php?lid=2408 http://datsun1200.com/modules/myalbum/photos/thumbs/2408.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=2409 http://datsun1200.com/modules/myalbum/photos/thumbs/2409.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=2410 http://datsun1200.com/modules/myalbum/photos/thumbs/2410.jpg] | ||
| + | [http://datsun1200.com/modules/myalbum/photo.php?lid=2411 http://datsun1200.com/modules/myalbum/photos/thumbs/2411.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=3215 http://datsun1200.com/modules/myalbum/photos/thumbs/3215.jpg] | ||
| + | [http://datsun1200.com/modules/myalbum/photo.php?lid=3684 http://datsun1200.com/modules/myalbum/photos/thumbs/3684.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=3685 http://datsun1200.com/modules/myalbum/photos/thumbs/3685.jpg] | ||
| + | [http://datsun1200.com/modules/myalbum/photo.php?lid=942 http://datsun1200.com/modules/myalbum/photos/thumbs/942.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=1877 http://datsun1200.com/modules/myalbum/photos/thumbs/1877.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=1884 http://datsun1200.com/modules/myalbum/photos/thumbs/1884.jpg] | ||
| + | [http://datsun1200.com/modules/myalbum/photo.php?lid=1100 http://datsun1200.com/modules/myalbum/photos/thumbs/1100.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=2875 http://datsun1200.com/modules/myalbum/photos/thumbs/2875.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=2826 http://datsun1200.com/modules/myalbum/photos/thumbs/2826.jpg] | ||
| + | [http://datsun1200.com/modules/myalbum/photo.php?lid=2950 http://datsun1200.com/modules/myalbum/photos/thumbs/2950.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=2960 http://datsun1200.com/modules/myalbum/photos/thumbs/2960.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=2961 http://datsun1200.com/modules/myalbum/photos/thumbs/2961.jpg] | ||
| + | |||
| + | |||
| + | [[Category:Fuel System]] | ||
Revision as of 02:08, 9 March 2009
Some 1980-1982 Datsuns in Asia markets came with an OEM (factory) EFI system. Nissan called it "EGI" -- Electronic Gasoline Injection. This is the "rare as" A14E Injection motor.
quote:
a friend of mine has a system that came on the A14 in the M10 Pulsars (very first ones). The set up he got came from Singapore
The A14E engine came in:
- 1979-1981 Langley (N10 Pulsar) -- Asian markets
- 1978-up Feb - Sunny 1400SGX-E Coupe -- Asian markets
"A" series engines are produced in Aichi Machine held in Aichi plant.
Quite a large horsepower difference:
- A14E: 92 PS @ 6400 rpm, 11.7 kg-m @ 3600 rpm
- A14: 80 PS @ 6000 rpm, 10.2 kg-m @ 3600 rpm
A14 EFI manifold
SSS as I remember at one stage they had import carbie A15 engines for round $600 and injected A14 and A15 for around $800
Reportedly, Nepean Sports classics in Castlereagh NSW was selling import motors. carlos' son ran one. These are fairly sought after by the rally guys as the narrow runners provide torque and the length also good top end, too small for a big A15 though.
These possibly came in later model Nissan Vanettes, the reason they seem rare is both my manifolds broke across the bottom of no's 1 & 2 inlet runner. Plus it suffers from reversion with a big cam.
These were also available in asian markets (Japan, Singapore, etc).
quote:
- A14 EGI = HB310 (1978-1980) Type-GX & SGX
- A15 EGI = PB310 (1980-1981) Type-GX & SGX
As for the name in Japan, Nissan calls EGI and Toyota EFI.
Although the EGI system should excel Carburettors in the performance, old EGI is inferior to Carburettors.
Discussions:
As you can see here, the setup is nearly identical to 1980 200SX EFI system:
- This car is missing the air induction piping that goes across the radiator (see 200SX EFI for layout and diagrams)
B310 Factory Setup
Performance
This factory Nissan setup was designed for typical mass-market street performance. It is not a racing system. Expect better low-speed horsepower performance than a stock DCH306 carburetor (due to the longer runners), but the same peak horsepower.
Quote
A factory EFI setup imported from Japan was tried, and found to be much smoother, but ... restrictive above 6000rpm when used with the [racing] cam.
Photo Index
