Overview

A14E & A15E engines used EGI.

Album 16596 Album 15062 Album 1100

Album 21776 Album 21831

Album 21849 Album 8104

On the bottom of the intake manifold is the water hose. It connects to the front block water tube.
Album 21837
Water hose is "E" in this photo

14052-H9200 HOSE-WATER 
* 08723-12000 CLAMP (2)

[edit]

High RPM Usage

Modified for 8500 RPM use including larger throttle body
Album 2758 Album 6218 Album 3273 Album 3268

[edit]

Port Size

Port size
* 28x32 mm (medium oval) with injection cutout of extending up to 40mm
* compare to standard A14: 28x34
Album 21848
* Port sizes on the same manifold vary a bit

Album 21834

14003-H9200 MANIFOLD-INTAKE A14E
14003-H9254 MANIFOLD-INTAKE A15E
* 08223-84510 STUD $1.15 USD
* 08223-84010 STUD $0.78 USD

Album 3684

Be sure to port match, as ports can vary.
Black shows the gasket opening (port matching)
Album 21775

[edit]

Support Bracket

Just like the B310 A14 & A15 carburetor manifolds, the EFI manifold needs a support brace.

Album 26722 Post 484061

14018-H9200 MANIFOLD SUPPORT
fasteners to manifold
* 14018E (2) 11053-H9200 MANIFOLD BRACKET WASHER
* 08120-81610 BOLT M8x16
fasteners to engine mount stud
* 08915-53810 PLAIN LARGE WASHER M8
* 08915-23810 THICK SPRING LOCK WASHER M8
* 08911-10810 M8 NUT

Retrieved from "http://datsun1200.com/modules/mediawiki/index.php?title=EGI_intake_manifold"

This page has been accessed 3,886 times. This page was last modified 08:52, 1 June 2019. Content is available under Datsun 1200 Club.

EGI intake manifold

Contents

Overview

High RPM Usage

Port Size

Support Bracket