Revision as of 06:37, 4 July 2012 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 06:46, 4 July 2012 ddgonzal (Talk | contribs) Next diff -> |
||
Line 1: | Line 1: | ||
[[Category:Front Axle And Front Suspension]][[Category:General Information]] | [[Category:Front Axle And Front Suspension]][[Category:General Information]] | ||
[[H74]] is the [[Applied Model Code]] for the late A12-powered Datsun [[B210]]. H74 suspension was used by the [[B120]] Datsun 1200 truck/pickup/ute. It uses 45mm struts like the B110. | [[H74]] is the [[Applied Model Code]] for the late A12-powered Datsun [[B210]]. H74 suspension was used by the [[B120]] Datsun 1200 truck/pickup/ute. It uses 45mm struts like the B110. | ||
+ | |||
+ | = Overview = | ||
+ | H74 front suspension was used by these models: | ||
B120 from October 1975 | B120 from October 1975 | ||
Line 7: | Line 10: | ||
B310 (some) | B310 (some) | ||
- | [[Transverse Link]] (LCA) H74/H85/W58 B120(late)/B210(late)/B310(A12) | + | H10 = B110 parts |
+ | * earlier B120 used H10 components | ||
+ | * earlier B210 used H50 components, same as or close to H10 | ||
+ | |||
+ | = Components = | ||
+ | [[Transverse Link]] (LCA) H74/H85/W58 B120(late)/B210(late)/B310(ALL) | ||
+ | * can replace H10 LCA but requires H74 ball joint | ||
[[Tension Rod]] H74 | [[Tension Rod]] H74 | ||
- | [[Ball Joint]] H74 | + | * different bolt spacing than H10 |
+ | [[Ball Joint]] H74 | ||
+ | * wider bolt spacing than H10 | ||
+ | * for B310, used with A12 only | ||
[[Steering Arm]] H74 | [[Steering Arm]] H74 | ||
Tie-rod ends | Tie-rod ends |
Revision as of 06:46, 4 July 2012
H74 is the Applied Model Code for the late A12-powered Datsun B210. H74 suspension was used by the B120 Datsun 1200 truck/pickup/ute. It uses 45mm struts like the B110.
Overview
H74 front suspension was used by these models:
B120 from October 1975 VB210 from October 1975 B210 from December 1975 B310 (some)
H10 = B110 parts * earlier B120 used H10 components * earlier B210 used H50 components, same as or close to H10
Components
Transverse Link (LCA) H74/H85/W58 B120(late)/B210(late)/B310(ALL) * can replace H10 LCA but requires H74 ball joint Tension Rod H74 * different bolt spacing than H10 Ball Joint H74 * wider bolt spacing than H10 * for B310, used with A12 only Steering Arm H74 Tie-rod ends