![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 07:48, 25 May 2012 ddgonzal (Talk | contribs) (->Troubleshooting) <- Previous diff |
Current revision ddgonzal (Talk | contribs) |
||
| Line 1: | Line 1: | ||
| - | The Hitachi LR series of internally-regulated [[Alternator]] was first fitted to North American B210 for the 1978 [[Model year]]. It weighs about 2-1/2 pounds more than a stock Datsun 1200 35A model and about 1 pound more than an externally regulated 50A Hitachi. The LR160 60 amp model is physically identical, and was first used around 1983. | + | The Hitachi LR series of internally-regulated [[alternator]] was first fitted to North American Datsuns for the 1978 [[Model year]] and used in Australia in the 1980s. |
| - | [http://www.rockauto.com/catalog/x,carcode,1210824,parttype,2412,EPIsubcategory%5B97%5D http://info.rockauto.com/Bosch/AL238X_2.JPG] | + | = Overview = |
| + | The LR internally-regulated alternators came on newer A-series engines, from 1978 for Nissan North America, and from the 1980s for Australia. The [[620]] came with the LR-135 (35 AMP) which is same size as the Datsun 1200 LT-135. The B210 came with 50 AMP LR-150, it weighs about 2-1/2 pounds more than a stock Datsun 1200 35A model and about 1 pound more than an externally regulated 50A Hitachi. Also available in 60 amp model LR160 which is physically identical to the LR150. | ||
| + | Navara [[Datsun_truck#Nissan_D21|D21]] 1986-1992 alternator on Datsun 1200 | ||
| + | <br>{{Album|15469}} | ||
| - | = Physical Specifications = | + | Only a [[Alternator_Wiring#Late-model_Alternator|simple wiring change]] is required when replacing Datsun externally-regulated alternators. |
| - | The LR150/LR160 came on newer A-series engines. | + | |
| - | [http://datsun1200.com/modules/myalbum/photo.php?lid=5088 http://datsun1200.com/modules/myalbum/photos/5088.jpg] | + | Direct bolt-on to replace B110 35A |
| - | * LR160 - 60A, second from left | + | * Hitachi [[LR135]] 35A |
| - | * Engine-mounting side is 80 mm (~3-3/16") in between ears, same as stock Datsun 1200 | + | * Mitsubishi [[LR135|A1T2]] |
| - | ** 10.5mm diameter mount holes | + | {{Main|LR135}} |
| - | * front flange (bolt ears) 13mm thick | + | |
| - | * Adjuster ear 175mm (~6-7/8") across. The stock 1200 unit is smaller at 156mm (~6-1/8") from the mount ear. | + | |
| - | ** So you may need a late A12 adjuster and fan belt | + | |
| - | ** threaded for M8x1.25 bolt | + | |
| - | * About 129mm diameter. | + | |
| - | * Fan belt center: 29mm from front bolt face | + | |
| - | * Pulley diameter: 69mm | + | |
| + | Upgrade to Higher AMP | ||
| + | 1" larger diameter, [[Alternator_Upgrades#Hitachi_LT-150|bolts to A12 engine]] | ||
| + | * Hitachi LR150 50A | ||
| + | * Hitachi LR160 60A | ||
| + | * Mitsubishi A2T2 50A | ||
| + | * Mitsubishi A2T3 50A | ||
| + | * BOSCH 0986 | ||
| + | * BOSCH 3262 | ||
| + | * BOSCH 3349 | ||
| + | * LUCAS LRA02563 | ||
| + | * LUCAS LRA2563 | ||
| - | = Wiring = | + | [http://www.rockauto.com/catalog/x,carcode,1210824,parttype,2412,EPIsubcategory%5B97%5D buy at RockAuto.com] |
| - | If you install an LR alternator with internal-regulator on a 1200: | + | |
| - | * disconnect the voltage regulator | + | |
| - | * On the B110 regulator harness that goes down to the engine, connect WB wire of connector to WR wire of connector: | + | |
| - | * WR <--> WB | + | |
| - | * [http://datsun1200.com/modules/myalbum/photo.php?lid=7441 http://datsun1200.com/modules/myalbum/photos/thumbs/7441.jpg] wiring jumper | + | |
| - | * Logically, you are connecting the "L" (Lamp) of new alternator to "L" (Lamp) of the wiring harness which is connected to the IGN switch. Be sure to use the original Datsun 1200 wiring harnesses as the "L" wire color WR is a switched source in the harness. Only one jumper wire is needed. | + | |
| - | Some prefer two wires, which works on a 1200, 1200 with auto-choke, and with other Datsuns: | + | Hitachi LR135/Mitsubishi A1T2 (small diameter, same as B110 LT-135) bolt-in replacement, but with L-S wiring |
| - | * Jump W to Y wires | + | <br>{{Photo!|23100-B9810.jpg}} |
| - | * Jump WR to WB wires | + | |
| - | wiring diagram: | + | Has same T-connector, but is LR is additionally notched |
| - | <br> | + | <br>{{PhotoTh!|LRplug.jpg}} {{PhotoTh!|FNplug.jpg}} |
| - | [http://datsun1200.com/modules/myalbum/photo.php?lid=7440 http://datsun1200.com/modules/myalbum/photos/thumbs/7440.jpg] | + | |
| - | [http://datsun1200.com/modules/myalbum/photo.php?lid=14739 http://datsun1200.com/modules/myalbum/photos/thumbs/14739.jpg] Store-bought version ($30) of jumper wire | + | Bosch Al237x rebuild Hitachi 50 Amp |
| + | <br>{{Photo|AL237X.jpg|Datsun%201200/Parts}} | ||
| - | You can buy one mail-order from [[Bprojects]]. Endo will take care of you, send an email to Bprojects. | + | Middle two alternators: Hitachi LR-type 50-60 amp |
| + | {{Album|5088}} | ||
| + | LR160 - 60A, second from left | ||
| + | LR150 - 50A, third from left (Bosch compatible unit) | ||
| - | http://www.risebike.com/pro/GAZO_LOGO/e_shop/parts/engine/ic%20harness.gif | + | 50A 23100-H7711 Mitsubishi A2T24971 - compatible |
| - | <br>Price: 5,250yen (about $52 USD) | + | <br>{{Album|25531}} |
| - | == Automatic Choke == | + | = Physical Specifications = |
| - | NOTE: If your Datsun was factory-equipped with [[Automatic Choke]], a second jumper is needed. See above. | + | * Engine-mounting side is 80 mm (~3-3/16") in between ears, same as stock Datsun 1200 |
| + | * 10.5mm diameter mount holes | ||
| + | * front flange (bolt ears) 13mm thick | ||
| + | * Adjuster ear 175mm (~6-7/8") across | ||
| + | The stock 1200 unit is smaller at 156mm (~6-1/8") from the mount ear. | ||
| + | * So you may need a late A12 adjuster and fan belt | ||
| + | * threaded for M8x1.25 bolt | ||
| + | * About 129mm diameter. | ||
| + | * Fan belt center: 29mm from front bolt face | ||
| + | * Pulley diameter: 69mm | ||
| - | Alternate method of wiring the choke: With LR alternator: On the carburetor, unplug the electric choke. Make a new jumper wire from the choke to the ballast resistor (12V side). The downside of this is the choke starts warming as soon as KEY is ON, whether the engine starts or not. If you have trouble starting the engine, in cold weather you may never get it started, because the choke begins to open. | + | = Wiring = |
| + | {{SeeEx|see=Main|Alternator_Wiring#Late-model_Alternator|IR Alternator Wiring}} | ||
| + | = Sources = | ||
| + | Australia Sources | ||
| + | * Mazda 12B, 13B, F8, FE, MA, VC | ||
| + | * Subaru Leone/Brumby | ||
| + | * Isuzu Trooper (has vacuum pump & triple pulley) | ||
| + | * Nissan Patrol/Navara (has vacuum pump) | ||
| + | * Ford Courier diesel (has vacuum pump) | ||
| - | === Original Wiring === | + | Japan Sources |
| - | The wiring harness for Datsun 1200 auto choke with LT-series alternator, for example, the 1973 1200 USA, the choke relay is connected to Ground. See [[Alternator_Wiring#Automatic_Choke_Relay]] | + | [[LR135]] (35 AMP) |
| - | <br>http://datsun1200.com/uploads/thumbs/14977.jpg 1200 relay, normally open. Alternator output will close the relay, activating the choke heater. | + | * 1200 Sunny Truck |
| - | The wiring harness for B310 with LR-series alternator, the choke relay is connected to IGN | + | North America sources |
| - | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=24362 http://datsun1200.com/uploads/thumbs/24362.jpg] B310 relay - normally closed. IGN switch will activate the relay, deactivating choke heater. Then alternator output will de-activate the relay, causing the choke heater to power up. | + | [[LR135]] (35 AMP) |
| + | * 1978-1979 Datsun 620 pickup | ||
| + | * 1980 Datsun 720 pickup | ||
| + | LR150 (50 AMP) | ||
| + | * Datsun 200SX (1978 - 1979) | ||
| + | * Datsun B210 1978 | ||
| + | * Datsun 210 (1979 - 1982) | ||
| + | * Datsun 310 (1979 - 1982) | ||
| + | * Datsun 510 (1978 - 1981) | ||
| + | * Datsun 720 PICKUP (1981 - 1985) | ||
| + | * Mazda 1979-1985 RX7 | ||
| + | * Mazda 1979-1982 626 | ||
| + | * Mazda 1979-1987 929 | ||
| + | * 1984 Nissan D21 [https://www.rockauto.com/en/catalog/nissan,1986,d21+pickup,2.4l+l4,1210835,electrical,alternator+/+generator,2412 Rockauto.com] with oval connector | ||
| - | The [[Choke Relay]] is wired oppositely different on LT-series and LR-series applications. However, since both are triggered by the Lamp/Nuetral wire, either alternator will work with either wiring harness/relay combination (old harness/old relay OR new harness/new relay). | + | LR160 (60 AMP) |
| + | * Datsun 200SX (1978 - 1983) | ||
| + | * Datsun 310 (1979 - 1981) | ||
| + | * Datsun 310 DELUXE 1982 | ||
| + | * Datsun 310 GX (1980 - 1982) | ||
| + | * Datsun 510 (1978 - 1981) | ||
| + | * Datsun 720 PICKUP (1981 - 1985) | ||
| + | * NISSAN PULSAR 1983 | ||
| + | * NISSAN PULSAR NX (1983 - 1986) | ||
| + | * NISSAN PULSAR NX TURBO 1983 | ||
| + | * [https://www.rockauto.com/en/catalog/nissan,1984,sentra,1.7l+l4+diesel,1212679,electrical,alternator+/+generator,2412 1984 Sentra diesel] with vacuum pump | ||
| - | == Troubleshooting == | + | {{search|Hitachi+LR.170|LR170}} (70 AMP) |
| - | 1. Check the Voltage at the alternator. Between the BAT terminal and the E terminal (earth/ground) there should be the same V as at the battery. If not, you got a wiring problem. | + | [https://www.rockauto.com/en/partsearch/?partnum=lr170 Rockauto.com] |
| - | 2. The S terminal should be 12V hot when key is turned to IGN | + | LR170 with vacuum pump |
| + | <br>{{Album|28544}} {{Album|28545}} | ||
| - | NOTE: on the B310 with this, S is hot all the time | + | {{search|Hitachi+LR.180|LR180}} (80 AMP) |
| - | either way will work | + | |
| - | + | ||
| - | 3. The L terminal (Lamp) should be: | + | |
| - | * 0V when key is turned OFF | + | |
| - | * 12V (more or less) when key is turnd ON | + | |
| - | + | ||
| - | Because the L terminal is the exciter, if your CHG lamp is burned out, the Hitachi LR won't charge. | + | |
| - | + | ||
| - | [http://i297.photobucket.com/albums/mm219/ddgonzal/sightings/forum/EL-19.jpg http://i297.photobucket.com/albums/mm219/ddgonzal/sightings/forum/th_EL-19.jpg] | + | |
| = Parts = | = Parts = | ||
| - | B122 Hitachi LR135 (35A) : See [[LR135]] | + | B122 Hitachi LR135 (35A) : See [[LR135]] |
| - | B210 1978, B310 50 amp Hitachi LR150 | + | B210 1978, B310 50 amp Hitachi LR150 |
| - | * 23100-H7703 B310 0381- | + | * 23100-H7703 B310 0381- |
| - | ** replaces 23100-H7702 B310 0580-0281 | + | * replaces 23100-H7702 B310 0580-0281 |
| - | ** replaces 23100-H7701 B310 0978-0480 | + | * replaces 23100-H7701 B310 0978-0480 |
| - | ** replaces 23100-H7700 B210 0877-, B310 -0878 | + | * replaces 23100-H7700 B210 0877-, B310 -0878 |
| - | * BOSCH AL238X, AL241X [http://www.rockauto.com/catalog/raframecatalog.php?catalog=23&partnum=AL238X&a=FR23-AL238X $71.99 at RockAuto.com] | + | * BOSCH AL238X, AL241X [http://www.rockauto.com/catalog/raframecatalog.php?catalog=23&partnum=AL238X&a=FR23-AL238X $71.99 at RockAuto.com] |
| - | * BBB PRECISON 14255 | + | * BBB PRECISON 14255 |
| - | * REMY 14185 | + | * REMY 14185 |
| - | * BECK/ARNLEY 1860266 | + | * BECK/ARNLEY 1860266 |
| - | * ACDELCO 321-1265 {#10463708} | + | * ACDELCO 321-1265 {#10463708} |
| + | Diode assembly | ||
| + | * Nissan 23230-W7101 or 23230-P2501 DIODE ASSEMBLY | ||
| + | * [http://www.rockauto.com/catalog/x,carcode,1208821,parttype,2452 AIRTEX 2D3071] | ||
| - | Diode assembly | + | LR160 60 Amp |
| - | * Nissan 23230-W7101 or 23230-P2501 DIODE ASSEMBLY | + | * 23100-W5807 Hitachi LR160, replaces 23100-W5805, 23100-W5806 |
| - | * [http://www.rockauto.com/catalog/x,carcode,1208821,parttype,2452 AIRTEX 2D3071] | + | * BOSCH AL241X |
| + | * BBB PRECISON 14587 | ||
| + | * ACDELCO 3341661 {60 AMP #19134654} | ||
| + | * REMY 14301 | ||
| + | == Brushes == | ||
| + | Brush Assembly LR150 (B210 from 0877) | ||
| + | * 23135-P2500 BRUSH ASSY LR150 | ||
| + | * 23133-P2501 BRUSH REGULATOR ASSY LR150 replaces 23133-P2500 | ||
| + | * Includes IC regulator | ||
| + | * STANDARD MOTOR PRODUCTS Part # VR592 | ||
| + | * AIRTEX/WELLS 5A1122 | ||
| + | * STANDARD MOTOR PRODUCTS JX108 | ||
| + | * Width 17/64" | ||
| + | * Thickness 29/32" | ||
| + | [http://www.rockauto.com/catalog/x,carcode,1210824,parttype,4884,partGroup,18 Rockauto.com] | ||
| - | LR160 60 Amp | + | {{Photo!|E726.jpg|width=SM}} |
| - | * 23100-W5807 Hitachi LR160, replaces 23100-W5805, 23100-W5806 | + | |
| - | * BOSCH AL241X | + | |
| - | * BBB PRECISON 14587 | + | |
| - | * ACDELCO 3341661 {60 AMP #19134654} | + | |
| - | * REMY 14301 | + | |
| + | == Regulator == | ||
| + | B210 1978 Internal IC Regulator (requires soldering) | ||
| + | * Nissan 23215-P2501 IC REGULATOR ASSY LR150 0877- replaces 23215-P2500 | ||
| + | * STANDARD MOTOR PRODUCTS VR162 | ||
| + | * ULTRA-POWER VR162 | ||
| - | == Sources == | + | [http://www.rockauto.com/catalog/x,carcode,1210824,parttype,4884,partGroup,18 Rockauto.com] |
| - | LR150 | + | |
| - | * Datsun 200SX (1978 - 1979) | + | |
| - | * Datsun B210 1978 | + | |
| - | * Datsun 210 (1979 - 1982) | + | |
| - | * Datsun 310 (1979 - 1982) | + | |
| - | * Datsun 510 (1978 - 1981) | + | |
| - | * Datsun 720 PICKUP (1981 - 1985) | + | |
| - | + | {{UploadPostH|174_5a48797c878c1.jpg|487071}} {{UploadPostH|174_5a487986124ba.jpg|487071}} {{UploadPostH|174_5a48798f0df83.jpg|487071}} | |
| - | LR160 | + | |
| - | * Datsun 200SX (1978 - 1983) | + | |
| - | * Datsun 310 (1979 - 1981) | + | |
| - | * Datsun 310 DELUXE 1982 | + | |
| - | * Datsun 310 GX (1980 - 1982) | + | |
| - | * Datsun 510 (1978 - 1981) | + | |
| - | * Datsun 720 PICKUP (1981 - 1985) | + | |
| - | * NISSAN PULSAR 1983 | + | |
| - | * NISSAN PULSAR NX (1983 - 1986) | + | |
| - | * NISSAN PULSAR NX TURBO 1983 | + | |
| - | + | ||
| - | + | ||
| - | + | ||
| - | == Brushes == | + | |
| - | Brush Assembly LR150 (B210 from 0877) | + | |
| - | * 23135-P2500 BRUSH ASSY LR150 | + | |
| - | * 23133-P2501 BRUSH REGULATOR ASSY LR150 replaces 23133-P2500 | + | |
| - | ** Includes IC regulator | + | |
| - | * STANDARD MOTOR PRODUCTS Part # VR592 | + | |
| - | *: [http://www.rockauto.com/catalog/x,carcode,1210824,parttype,4884,partGroup,18 http://info.rockauto.com/SMP/VR-592_FULL.jpg] | + | |
| - | + | ||
| - | == Regulator == | + | |
| - | B210 1978 Internal IC Regulator (requires soldering) | + | |
| - | * 23215-P2501 IC REGULATOR ASSY LR150 0877- replaces 23215-P2500 | + | |
| - | * STANDARD MOTOR PRODUCTS Part # VR162 | + | |
| - | *: [http://www.rockauto.com/catalog/x,carcode,1210824,parttype,4884,partGroup,18 http://info.rockauto.com/SMP/VR-162_TERMINAL.jpg] | + | |
| = Others = | = Others = | ||
| == Round I-L-S connector== | == Round I-L-S connector== | ||
| - | * may fit stock adjuster bracket (156mm mounting) | + | * may fit stock adjuster bracket (156mm mounting) |
| - | * Use with 4mm spacer (extra washers) on engine rear mount bolt | + | * Use with 4mm spacer (extra washers) on engine rear mount bolt |
| - | Hitachi LR160-723 | + | North America sources |
| - | * 1990-1993 Nissan Pickup | + | Hitachi LR160-723 |
| + | * 1990-1993 Nissan Pickup | ||
| + | Hitachi LR150-704 | ||
| + | * 1989-1992 Isuzu Amigo | ||
| + | * 1988-1992 Isuzu Pickup | ||
| + | * 1991-1992 Isuzu Rodeo | ||
| + | * 1987-1991 Isuzu Trooper 2.3 | ||
| + | Hitachi LR150-718 | ||
| + | * NOTE: 175mm mounting | ||
| + | * 1989-1992 Isuzu Amigo | ||
| + | * 1988-1992 Isuzu Pickup | ||
| + | * 1991-1992 Isuzu Rodeo | ||
| - | Hitachi LR150-704 | + | == Squared-Round S-L connector== |
| - | * 1989-1992 Isuzu Amigo | + | Hitachi LR170-734B/739B/745 (about 1/2 kilo heaver that LR160) |
| - | * 1988-1992 Isuzu Pickup | + | * NOTE: 175mm mounting |
| - | * 1991-1992 Isuzu Rodeo | + | * NOTE: 8.5 mm (smaller) mounting holes |
| - | * 1987-1991 Isuzu Trooper 2.3 | + | * NOTE: Large 77m pulley |
| - | Hitachi LR150-718 | + | North America sources: |
| - | * NOTE: 175mm mounting | + | * 1990-1995 Nissan Pathfinder |
| - | * 1989-1992 Isuzu Amigo | + | * 1990-1995 Nissan Pickup |
| - | * 1988-1992 Isuzu Pickup | + | |
| - | * 1991-1992 Isuzu Rodeo | + | |
| - | + | ||
| - | + | ||
| - | == Squared-Round S-L connector== | + | |
| - | Hitachi LR170-734B/739B/745 (about 1/2 kilo heaver that LR160) | + | |
| - | * NOTE: 175mm mounting | + | |
| - | * NOTE: 8.5 mm (smaller) mounting holes | + | |
| - | * NOTE: Large 77m pulley | + | |
| - | * 1990-1995 Nissan Pathfinder | + | |
| - | * 1990-1995 Nissan Pickup | + | |
| - | [[Category:Charging System Modifications]] | + | [[Category:Charging System]]{{End}} |
Current revision
The Hitachi LR series of internally-regulated alternator was first fitted to North American Datsuns for the 1978 Model year and used in Australia in the 1980s.
Contents |
[edit]
Overview
The LR internally-regulated alternators came on newer A-series engines, from 1978 for Nissan North America, and from the 1980s for Australia. The 620 came with the LR-135 (35 AMP) which is same size as the Datsun 1200 LT-135. The B210 came with 50 AMP LR-150, it weighs about 2-1/2 pounds more than a stock Datsun 1200 35A model and about 1 pound more than an externally regulated 50A Hitachi. Also available in 60 amp model LR160 which is physically identical to the LR150.
Navara D21 1986-1992 alternator on Datsun 1200
Only a simple wiring change is required when replacing Datsun externally-regulated alternators.
Direct bolt-on to replace B110 35A * Hitachi LR135 35A * Mitsubishi A1T2
Main: LR135
Upgrade to Higher AMP 1" larger diameter, bolts to A12 engine * Hitachi LR150 50A * Hitachi LR160 60A * Mitsubishi A2T2 50A * Mitsubishi A2T3 50A * BOSCH 0986 * BOSCH 3262 * BOSCH 3349 * LUCAS LRA02563 * LUCAS LRA2563
Hitachi LR135/Mitsubishi A1T2 (small diameter, same as B110 LT-135) bolt-in replacement, but with L-S wiring
Has same T-connector, but is LR is additionally notched
Bosch Al237x rebuild Hitachi 50 Amp
Middle two alternators: Hitachi LR-type 50-60 amp
LR160 - 60A, second from left
LR150 - 50A, third from left (Bosch compatible unit)
50A 23100-H7711 Mitsubishi A2T24971 - compatible
[edit]
Physical Specifications
* Engine-mounting side is 80 mm (~3-3/16") in between ears, same as stock Datsun 1200 * 10.5mm diameter mount holes * front flange (bolt ears) 13mm thick * Adjuster ear 175mm (~6-7/8") across The stock 1200 unit is smaller at 156mm (~6-1/8") from the mount ear. * So you may need a late A12 adjuster and fan belt * threaded for M8x1.25 bolt * About 129mm diameter. * Fan belt center: 29mm from front bolt face * Pulley diameter: 69mm
[edit]
Wiring
Main: IR Alternator Wiring
[edit]
Sources
Australia Sources * Mazda 12B, 13B, F8, FE, MA, VC * Subaru Leone/Brumby * Isuzu Trooper (has vacuum pump & triple pulley) * Nissan Patrol/Navara (has vacuum pump) * Ford Courier diesel (has vacuum pump)
Japan Sources LR135 (35 AMP) * 1200 Sunny Truck
North America sources LR135 (35 AMP) * 1978-1979 Datsun 620 pickup * 1980 Datsun 720 pickup LR150 (50 AMP) * Datsun 200SX (1978 - 1979) * Datsun B210 1978 * Datsun 210 (1979 - 1982) * Datsun 310 (1979 - 1982) * Datsun 510 (1978 - 1981) * Datsun 720 PICKUP (1981 - 1985) * Mazda 1979-1985 RX7 * Mazda 1979-1982 626 * Mazda 1979-1987 929 * 1984 Nissan D21 Rockauto.com with oval connector
LR160 (60 AMP) * Datsun 200SX (1978 - 1983) * Datsun 310 (1979 - 1981) * Datsun 310 DELUXE 1982 * Datsun 310 GX (1980 - 1982) * Datsun 510 (1978 - 1981) * Datsun 720 PICKUP (1981 - 1985) * NISSAN PULSAR 1983 * NISSAN PULSAR NX (1983 - 1986) * NISSAN PULSAR NX TURBO 1983 * 1984 Sentra diesel with vacuum pump
LR170ᴳ (70 AMP) Rockauto.com
LR170 with vacuum pump
LR180ᴳ (80 AMP)
[edit]
Parts
B122 Hitachi LR135 (35A) : See LR135
B210 1978, B310 50 amp Hitachi LR150 * 23100-H7703 B310 0381- * replaces 23100-H7702 B310 0580-0281 * replaces 23100-H7701 B310 0978-0480 * replaces 23100-H7700 B210 0877-, B310 -0878 * BOSCH AL238X, AL241X $71.99 at RockAuto.com * BBB PRECISON 14255 * REMY 14185 * BECK/ARNLEY 1860266 * ACDELCO 321-1265 {#10463708}
Diode assembly * Nissan 23230-W7101 or 23230-P2501 DIODE ASSEMBLY * AIRTEX 2D3071
LR160 60 Amp
* 23100-W5807 Hitachi LR160, replaces 23100-W5805, 23100-W5806
* BOSCH AL241X
* BBB PRECISON 14587
* ACDELCO 3341661 {60 AMP #19134654}
* REMY 14301
[edit]
Brushes
Brush Assembly LR150 (B210 from 0877) * 23135-P2500 BRUSH ASSY LR150 * 23133-P2501 BRUSH REGULATOR ASSY LR150 replaces 23133-P2500 * Includes IC regulator * STANDARD MOTOR PRODUCTS Part # VR592 * AIRTEX/WELLS 5A1122 * STANDARD MOTOR PRODUCTS JX108 * Width 17/64" * Thickness 29/32"
[edit]
Regulator
B210 1978 Internal IC Regulator (requires soldering) * Nissan 23215-P2501 IC REGULATOR ASSY LR150 0877- replaces 23215-P2500 * STANDARD MOTOR PRODUCTS VR162 * ULTRA-POWER VR162
[edit]
Others
[edit]
Round I-L-S connector
* may fit stock adjuster bracket (156mm mounting) * Use with 4mm spacer (extra washers) on engine rear mount bolt
North America sources Hitachi LR160-723 * 1990-1993 Nissan Pickup Hitachi LR150-704 * 1989-1992 Isuzu Amigo * 1988-1992 Isuzu Pickup * 1991-1992 Isuzu Rodeo * 1987-1991 Isuzu Trooper 2.3 Hitachi LR150-718 * NOTE: 175mm mounting * 1989-1992 Isuzu Amigo * 1988-1992 Isuzu Pickup * 1991-1992 Isuzu Rodeo
[edit]
Squared-Round S-L connector
Hitachi LR170-734B/739B/745 (about 1/2 kilo heaver that LR160) * NOTE: 175mm mounting * NOTE: 8.5 mm (smaller) mounting holes * NOTE: Large 77m pulley
North America sources: * 1990-1995 Nissan Pathfinder * 1990-1995 Nissan Pickup
¤