User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Hydraulic clutch

(Difference between revisions)

Datsun 1200 encyclopedia | Recent changes | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision
Categories: Clutch | Transmission Modifications

Revision as of 03:52, 30 January 2017
ddgonzal (Talk | contribs)
(->HYDRAULIC HOSE)
<- Previous diff
Revision as of 21:52, 7 October 2017
ddgonzal (Talk | contribs)

Next diff ->
Line 26: Line 26:
Adjust the free play to 5/32". Adjust the free play to 5/32".
-[http://datsun1200.com/modules/myalbum/photo.php?lid=539 http://datsun1200.com/uploads/thumbs/539.jpg] +{{Album|539}}
== Pedal Linkage == == Pedal Linkage ==
Before adjusting the pedal linkage, first adjust the clutch release arm under the car. Before adjusting the pedal linkage, first adjust the clutch release arm under the car.
-[http://datsun1200.com/modules/myalbum/photo.php?lid=539 http://datsun1200.com/uploads/photos/539.jpg] +{{Album|539}}
Slave cylinder: 1 to 2 mm play. Pull the release lever until it stops. Slave cylinder: 1 to 2 mm play. Pull the release lever until it stops.
-[http://datsun1200.com/modules/myalbum/photo.php?lid=538 http://datsun1200.com/uploads/thumbs/538.JPG]+{{Album|538}}
The pedal specs are: The pedal specs are:
Line 42: Line 42:
* Pedal stroke is 5.65 in (143.5 mm) with the adjustment stop (the switch in the diagram) backed off. Adjustment is made with shims for the cylinder on the firewall. * Pedal stroke is 5.65 in (143.5 mm) with the adjustment stop (the switch in the diagram) backed off. Adjustment is made with shims for the cylinder on the firewall.
-[http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/trans/CL-06_CL15.jpg http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/trans/th_CL-06_CL15.jpg]+{{Photo|CL-06_CL15.jpg|Datsun%201200/wiki/trans}}
Adusting Shim Adusting Shim
Line 70: Line 70:
* 30620-H1600 ASSY-CYLINDER CLUTCH OPERATING * 30620-H1600 ASSY-CYLINDER CLUTCH OPERATING
-* [http://datsun1200.com/modules/myalbum/photo.php?lid=4652 http://datsun1200.com/uploads/thumbs/4652.jpg]+* {{Album|4652}}
* Left: Original Style 30620-H1601 (superceded by 30620-H1600) $59 USD * Left: Original Style 30620-H1601 (superceded by 30620-H1600) $59 USD
* Right: Replacement Style 30620-H1600 * Right: Replacement Style 30620-H1600
Line 81: Line 81:
B310 A14 B310 A14
-<br>[http://datsun1200.com/modules/myalbum/photo.php?lid=25417 http://datsun1200.com/uploads/thumbs/25417.jpg]+<br>{{Album|25417}}
== B210 == == B210 ==
Line 91: Line 91:
30610-H5801/30610-H5802 4> 30610-B8001 30610-H5801/30610-H5802 4> 30610-B8001
- [http://datsun1200.com/modules/myalbum/photo.php?lid=19294 http://datsun1200.com/uploads/thumbs/19294.jpg]+ {{Album|19294}}
* Comparo: B110 and B210 are both 5/8" Master Cylinders * Comparo: B110 and B210 are both 5/8" Master Cylinders
* NOT interchangeable with B110 due to the rod differences * NOT interchangeable with B110 due to the rod differences
Line 184: Line 184:
See main article: [[Remote Clutch Master Cylinder]] See main article: [[Remote Clutch Master Cylinder]]
-http://datsun1200.com/uploads/thumbs/7656.jpg http://datsun1200.com/uploads/thumbs/4859.jpg http://datsun1200.com/uploads/thumbs/9524.jpg+{{ThumbH!|7656}} {{ThumbH!|4859}} {{ThumbH!|9524}}
= Photo Index = = Photo Index =
<!-- Editors: don't remove pics unless they are un-related to the topic --> <!-- Editors: don't remove pics unless they are un-related to the topic -->
-Click each pic for large photo and discussion.+{{Indexi!}}<div class="index_body">{{Thumbi|9470}} {{Thumbi|10824}}
- +{{Thumbi|540}} {{Thumbi|541}} {{Thumbi|1153}} {{Thumbi|1851}} {{Thumbi|2230}} {{Thumbi|4859}} {{Thumbi|7477}} {{Thumbi|7499}} {{Thumbi|7510}} {{Thumbi|7741}} {{Thumbi|7742}} {{Thumbi|9387}} {{Thumbi|9470}} {{Thumbi|9524}} {{Thumbi|9526}} {{Thumbi|9668}}</div>
-[http://datsun1200.com/modules/myalbum/photo.php?lid=9470 http://datsun1200.com/uploads/thumbs/9470.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=10824 http://datsun1200.com/uploads/thumbs/10824.jpg]+
- +
-[http://datsun1200.com/modules/myalbum/photo.php?lid=540 http://datsun1200.com/uploads/thumbs/540.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=541 http://datsun1200.com/uploads/thumbs/541.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=1153 http://datsun1200.com/uploads/thumbs/1153.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=1851 http://datsun1200.com/uploads/thumbs/1851.jpg][http://datsun1200.com/modules/myalbum/photo.php?lid=2230 http://datsun1200.com/uploads/thumbs/2230.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=4859 http://datsun1200.com/uploads/thumbs/4859.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=7477 http://datsun1200.com/uploads/thumbs/7477.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=7499 http://datsun1200.com/uploads/thumbs/7499.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=7510 http://datsun1200.com/uploads/thumbs/7510.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=7741 http://datsun1200.com/uploads/thumbs/7741.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=7742 http://datsun1200.com/uploads/thumbs/7742.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=9387 http://datsun1200.com/uploads/thumbs/9387.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=9470 http://datsun1200.com/uploads/thumbs/9470.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=9524 http://datsun1200.com/uploads/thumbs/9524.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=9526 http://datsun1200.com/uploads/thumbs/9526.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=9668 http://datsun1200.com/uploads/thumbs/9668.jpg]+
[[Category:Clutch]] [[Category:Clutch]]
-[[Category:Transmission Modifications]]+[[Category:Transmission Modifications]]{{End}}

Revision as of 21:52, 7 October 2017

Left-hand-drive (LHD) versions of the Datsun 1200 used a hydraulic clutch system. It is very nice, with a light, linear action.

Contents

Daily Care

1972 USA Owners manual (Page 25 ... ):

29357.jpg   29362.jpg
Before driving or whenever you call at a gas-station, be sure to check ...
  • Leakage and amount of fluid in brake and clutch master cylinders
  • Clutch and brake operation

Observe the level of fluid visible through the plastic reservoir of the master cylinder (no need to remove the cap).

Overview

Stock pedal force is 10.8 kg (23.8 lb), a bit higher than the RHD mechnical clutch at 8.3 kg (18.3 lb). The slave cylinder diameter is 3/4 inch and the master cylinder is 5/8 inch.

  • Extremely light clutch pedal effort, but with good feedback

537.JPGAlbum 537

Clutch slave cylinder bolted to transmission
25468.jpgAlbum 25468

Adjustment

This is for the 71-73 1200. The B210 (120Y) measurements are different.

  1. Adjust slave cylinder free play
  2. Adjust pedal pad height without stopper
  3. Adjust pedal stopper

Clutch Slave Cylinder

Stock clutch slave cylinder diameter is 3/4 inch.

Adjust the free play to 5/32".

539.jpgAlbum 539

Pedal Linkage

Before adjusting the pedal linkage, first adjust the clutch release arm under the car.

539.jpgAlbum 539

Slave cylinder: 1 to 2 mm play. Pull the release lever until it stops.

538.jpgAlbum 538

The pedal specs are:

  • Pedal height: 5.57 in (141.5 mm)
  • Pedal free play: 1.181 in (30 mm)
  • Pedal stroke is 5.65 in (143.5 mm) with the adjustment stop (the switch in the diagram) backed off. Adjustment is made with shims for the cylinder on the firewall.

CL-06_CL15.jpg

Adusting Shim

  • 30611-27260 1.6 mm
  • 30612-27260 0.8 mm
  • 30613-27260 0.5 mm

Removable, Replacement and Bleeding

If the Master Cylinder runs dry, or when replacing it, be sure to bleed the Master Cylinder separately.

Remove the pipe & place a thumb over it for the return stroke of the pedal to prevent ingestion of air. Once the Master Cylinder is free of air you can bleed the whole system with confidence.

Part Numbers

Stock USA cylinders. "Repair Kits" are also available. These include all new rubber parts, and can be used if the aluminum body is not pitted. The bore is hand-honed. Often with aluminum a kit will leak, so we recommend a new unit rather than a kit. Cast-iron cylinders may have better success.

Master Cylinder

Clutch Master Cylinder - 5/8"

  • 30610-24900 ASSY-CYLINDER CLUTCH MASTER (5/8" NABCO)

http://www.rockauto.com

  • 30610-24900 (superceded by 30610-24910). $111 USD
  • RHINO PAC M0600 $35.79

Slave Cylinder

Clutch Slave Cylinder - 3/4"

  • 30620-H1600 ASSY-CYLINDER CLUTCH OPERATING
  • 4652.jpgAlbum 4652
  • Left: Original Style 30620-H1601 (superceded by 30620-H1600) $59 USD
  • Right: Replacement Style 30620-H1600


Clutch Slave Cylinder

  • RAYBESTOS SC37495 $12.44
  • ACDELCO 18F19 $14.56
  • RHINO PAC S0600 $15.92

B310 A14
25417.jpgAlbum 25417

B210

Master

* Clutch Master Cylinder: 5/8 inch

HB210 USA
30610-H2502/30610-B8000/30610-B8001
30610-H5801/30610-H5802 4> 30610-B8001
19294.jpgAlbum 19294
* Comparo: B110 and B210 are both 5/8" Master Cylinders
* NOT interchangeable with B110 due to the rod differences
* B310 looks the same as B210 except bolts are at 45 degrees


Beck Arnley part number 072-6489
* 620 Pickup from 1972-3/76
* B210 (all models) from 1974-4/75
* SPL-311 (1600 or 2000) from 1966-70
* 510 from 1968-73 (with Nabco master cylinder)
* 610 from 1973-75 (with Nabco master cylinder)
* 710 from 1973-75


Beck Arnley part 072-6521
* 74-75 B210
* 76 F10
* 72-76
* 620 pickup
* 66-70 SPL-311 1600
* 68-70 SPL-311 2000
* 75-78 280Z
* 69-73 510
* 78-81 510
* 73-76 610
* 74-77 710
* 77-81 810

Slave

HB210 USA
11/16" - 4speed ALL, 5speed from 11/76
* 30620-H6100 Clutch Slave Cylinder <> 30620-H6101/30620-H61012
early 5-speed 3/4" - to 9/76
* 30620-U7000 Clutch Slave Cylinder: 11/16 inch <> 30620-R6400
610 
30620-S0100 Clutch Operating Cylinder [slave cylinder, 3/4"]
* For 63-series 4 or 5-speed
Alternatives:
* 30620-18V00, 30620-18V01, 30620-69F03, 30620-69F70, 30620-P9500
* 30620-S0100, 30620-U7000, 30620-U7001, 30620-W7000, 30620W-W7001
30620-18V01
* S13 240SX 1991-1993
30620-69F03
* S14 240SX 1996-
30620-P9500
* S130 280ZX 1982-

HYDRAULIC HOSE

The hose is difficult to find in USA, except on eBay. Alternatives: lot of the brake hoses from cars with a solid rear axle will work also.

(rear brake hose)
* BRAKEWARE #77001 $12 at Autozone.  

It's about 1.5-2 inches longer then the original, does not hang too low and bolts right up

1200 rear brake hose $4 at RockAuto
* one male, one female end
* Wagner BH96544
* Bendix 77101
* American Remanufacturers 8704300
* Coni-seal BH177101
* Dorman H36866 (13")
* Raybestos BH36866/4536866/SP5939 (13-3/16")
* Centric 15042300
* Guardian 3196544
* Beck/Arnley 073-0879 ( 0730879)
Bendix 77101
* 46201-89918
* 46201-H7200
* 46211-89911
Length: 13-3/64"
10x1.0 mm female x 10x1.0 male

25419.jpgAlbum 25419 25467.jpgAlbum 25467

RHD Hydraulic Conversion

Also See: Remote Clutch Master Cylinder (under-dash)
Also See: Pedals

180B master
7738.jpgAlbum 7738 7741.jpgAlbum 7741 7742.jpgAlbum 7742

200B hydraulic swap
5409.jpgAlbum 5409

R31 swap, box braced to steering post. Original clutch pedal removed
10824.jpgAlbum 10824 10825.jpgAlbum 10825

Remote Clutch Master Cylinder

See main article: Remote Clutch Master Cylinder

7656.jpg 4859.jpg 9524.jpg

Photo Index

Click any thumbnail to see it full size in our Club Photo Album. Read details or post a comment!

9470.jpg 10824.jpg 540.jpg 541.jpg 1153.jpg 1851.jpg 2230.jpg 4859.jpg 7477.jpg 7499.jpg 7510.jpg 7741.jpg 7742.jpg 9387.jpg 9470.jpg 9524.jpg 9526.jpg 9668.jpg
 
¤