Hydraulic clutch

(Difference between revisions)

Datsun 1200 encyclopedia | Recent changes | Switch to MediaWiki mode

Special pages Double redirects Broken redirects Disambiguation pages Log in / create account Preferences My watchlist Recent changes Upload file File list Gallery of new files User list Statistics Random page Orphaned pages Uncategorized pages Uncategorized categories Unused categories Unused files Wanted pages Wanted categories Most linked to pages Most linked to categories Articles with the most categories Most linked to images Articles with the most revisions Short pages Long pages New pages Oldest pages Dead-end pages All pages Prefix index List of blocked IP addresses and usernames Book sources Categories Export pages Version System messages Logs MIME search List redirects Popular pages Search

Printable version | Disclaimers | Privacy policy | Current revision
Categories: Clutch | Transmission Modifications

---

Revision as of 10:36, 3 May 2018 ddgonzal (Talk | contribs) (->Slave Cylinder) <- Previous diff		Revision as of 10:43, 3 May 2018 ddgonzal (Talk | contribs) (->RHD Hydraulic Conversion) Next diff ->
Line 174:		Line 174:
	= RHD Hydraulic Conversion =		= RHD Hydraulic Conversion =
-	Also See: [[Remote Clutch Master Cylinder]] (under-dash)	+	# Fit a master cylinder. You can purchase LHD 1200 part or use a local Datsun such as 180B, 200B or R31 parts
-	Also See: [[Pedals]]	+	# Fit clutch pedal
		+	# Fit slave to gearbox (see [[Release_Lever#Cable_to_Hydraulic|Converting to Hydraulic]])
		+
		+	Also See:
		+	* [[Remote Clutch Master Cylinder]] (under-dash)
		+	* [[Pedals]]
	180B master		180B master

---

Revision as of 10:43, 3 May 2018

Left-hand-drive (LHD) versions of the Datsun 1200 used a hydraulic clutch system. It is very nice, with a light, linear action.

Contents 1 Daily Care 2 Overview 3 Adjustment 3.1 Clutch Slave Cylinder 3.2 Pedal Linkage 4 Removable, Replacement and Bleeding 5 Part Numbers 5.1 Master Cylinder 5.2 Slave Cylinder 5.3 B210 5.3.1 Master 5.3.2 Slave 5.4 HYDRAULIC HOSE 6 RHD Hydraulic Conversion 7 Remote Clutch Master Cylinder 8 Photo Index

Daily Care

Observe the level of fluid visible through the plastic reservoir of the master cylinder (no need to remove the cap).

• If it is at or below the fill line, top up with DOT 3 Brake/Clutch fluid.

Overview

Stock pedal force is 10.8 kg (23.8 lb), a bit higher than the RHD mechnical clutch at 8.3 kg (18.3 lb). The slave cylinder diameter is 3/4 inch and the master cylinder is 5/8 inch.

• Extremely light clutch pedal effort, but with good feedback

Album 537

Clutch slave cylinder bolted to transmission
Album 25468

Adjustment

This is for the 71-73 1200. The B210 (120Y) measurements are different.

1. Adjust slave cylinder free play
2. Adjust pedal pad height without stopper
3. Adjust pedal stopper

Clutch Slave Cylinder

Stock clutch slave cylinder diameter is 3/4 inch.

Adjust the free play to 5/32".

Album 539

Pedal Linkage

Before adjusting the pedal linkage, first adjust the clutch release arm under the car.

Album 539

Slave cylinder: 1 to 2 mm play. Pull the release lever until it stops.

Album 538

The pedal specs are:

• Pedal height: 5.57 in (141.5 mm)
• Pedal free play: 1.181 in (30 mm)
• Pedal stroke is 5.65 in (143.5 mm) with the adjustment stop (the switch in the diagram) backed off. Adjustment is made with shims for the cylinder on the firewall.

Adusting Shim

• 30611-27260 1.6 mm
• 30612-27260 0.8 mm
• 30613-27260 0.5 mm

Removable, Replacement and Bleeding

If the Master Cylinder runs dry, or when replacing it, be sure to bleed the Master Cylinder separately.

Remove the pipe & place a thumb over it for the return stroke of the pedal to prevent ingestion of air. Once the Master Cylinder is free of air you can bleed the whole system with confidence.

Part Numbers

Stock USA cylinders. "Repair Kits" are also available. These include all new rubber parts, and can be used if the aluminum body is not pitted. The bore is hand-honed. Often with aluminum a kit will leak, so we recommend a new unit rather than a kit. Cast-iron cylinders may have better success.

Master Cylinder

Clutch Master Cylinder - 5/8"

• 30610-24900 ASSY-CYLINDER CLUTCH MASTER (5/8" NABCO)

http://www.rockauto.com

• 30610-24900 (superceded by 30610-24910). $111 USD
• RHINO PAC M0600 $35.79

Slave Cylinder

Clutch Slave Cylinder - 3/4"

• 30620-H1600 ASSY-CYLINDER CLUTCH OPERATING

  Album 4652

• Left: Original Style 30620-H1601 (superceded by 30620-H1600) $59 USD
• Right: Replacement Style 30620-H1600

Clutch Slave Cylinder Rockauto
* RAYBESTOS SC37495 $12.44
* ACDELCO 18F19 $14.56
* RHINO PAC S0600 $15.92
* EXEDY SC558 $6.84
* KELSEY-HAYES S51000 $4.83
* NAPA/UNITED 37495 $14.72
* BRUTE POWER/PERFECTION CLUTCH 37495 $6.44
* RAYBESTOS SC37495 $4.71

Exedy
Album 27025

B310 A14 (60-series gearbox)
Album 25417

B210

Master

* Clutch Master Cylinder: 5/8 inch

HB210 USA
30610-H2502/30610-B8000/30610-B8001
30610-H5801/30610-H5802 4> 30610-B8001

Album 19294
* Comparo: B110 and B210 are both 5/8" Master Cylinders
* NOT interchangeable with B110 due to the rod differences
* B310 looks the same as B210 except bolts are at 45 degrees

Beck Arnley part number 072-6489
* 620 Pickup from 1972-3/76
* B210 (all models) from 1974-4/75
* SPL-311 (1600 or 2000) from 1966-70
* 510 from 1968-73 (with Nabco master cylinder)
* 610 from 1973-75 (with Nabco master cylinder)
* 710 from 1973-75

Beck Arnley part 072-6521
* 74-75 B210
* 76 F10
* 72-76
* 620 pickup
* 66-70 SPL-311 1600
* 68-70 SPL-311 2000
* 75-78 280Z
* 69-73 510
* 78-81 510
* 73-76 610
* 74-77 710
* 77-81 810

Slave

HB210 USA
11/16" - 4speed ALL, 5speed from 11/76
* 30620-H6100 Clutch Slave Cylinder <> 30620-H6101/30620-H61012
early 5-speed 3/4" - to 9/76
* 30620-U7000 Clutch Slave Cylinder: 11/16 inch <> 30620-R6400

610 
30620-S0100 Clutch Operating Cylinder [slave cylinder, 3/4"]
* For 63-series 4 or 5-speed
Alternatives:
* 30620-18V00, 30620-18V01, 30620-69F03, 30620-69F70, 30620-P9500
* 30620-S0100, 30620-U7000, 30620-U7001, 30620-W7000, 30620W-W7001
30620-18V01
* S13 240SX 1991-1993
30620-69F03
* S14 240SX 1996-
30620-P9500
* S130 280ZX 1982-

HYDRAULIC HOSE

The hose is difficult to find in USA, except on eBay. Alternatives: lot of the brake hoses from cars with a solid rear axle will work also.

(rear brake hose)
* BRAKEWARE #77001 $12 at Autozone.  

It's about 1.5-2 inches longer then the original, does not hang too low and bolts right up

1200 rear brake hose $4 at RockAuto
* one male, one female end
* Wagner BH96544
* Bendix 77101
* American Remanufacturers 8704300
* Coni-seal BH177101
* Dorman H36866 (13")
* Raybestos BH36866/4536866/SP5939 (13-3/16")
* Centric 15042300
* Guardian 3196544
* Beck/Arnley 073-0879 ( 0730879)

Bendix 77101
* 46201-89918
* 46201-H7200
* 46211-89911
Length: 13-3/64"
10x1.0 mm female x 10x1.0 male

Album 25419 Album 25467

RHD Hydraulic Conversion

1. Fit a master cylinder. You can purchase LHD 1200 part or use a local Datsun such as 180B, 200B or R31 parts
2. Fit clutch pedal
3. Fit slave to gearbox (see Converting to Hydraulic)

Also See:
* Remote Clutch Master Cylinder (under-dash)
* Pedals

180B master
Album 7738 Album 7741 Album 7742

200B hydraulic swap
Album 5409

R31 swap, box braced to steering post. Original clutch pedal removed
Album 10824 Album 10825

Remote Clutch Master Cylinder

See main article: Remote Clutch Master Cylinder

Photo Index

Click any thumbnail to see it full size in our Club Photo Album. Read details or post a comment!

 

---

Edit this page | Discuss this page | Page history | What links here | Related changes




Datsun 1200 encyclopedia | About Datsun 1200 Club | Switch to MediaWiki mode