User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Japan Emissions

Revision as of 07:27, 25 May 2015; view current revision
<-Older revision | Newer revision->

Datsun 1200 encyclopedia | Recent changes | Edit this page | Page history | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision
Category: Emission Control And Tune-Up

度排出ガス規制適合

Note 保安基準適合 means Safety Standards.

Contents

H

"H" is the 1975 (50年度) emission standards. Also in 1975 in the United States similar regulations came into effect.

* H-B210 meets H-level emission standards
* H-B120 from 1975 uses NAPS-A engine A12

23894.jpg

EGR

All B211 (from December 1975) and VB210 (from October 1975) used EGR Exhaust Gas Reduction. This included Vans which were not fitted with catalytic converters.

Catalyst

Nissan system's of exhaust gas cleaning by catalyzed oxidation (NAPS) adopted. A 2-way catalytic converter converted carbon monoxide (CO) and unburned hydrocarbons (HC) to produce "harmless" carbon dioxide (CO2) and water (H2O). It was only later than CO2 was acknowledged to be a pollutant itself. NOTE: In 1980 the 3-way converter introduced a 3rd reaction to reduce the third major pollutant NOx.

To enable efficient conversion, extra oxygen is introduced into the exhaust system by use of Nissan A.I.S. (Air Injection System), using a passive air induction (tuned pulse-flow) system. It used a cylinder head with an air passage drilled from front to back.

23097.jpg

No feedback was used to control the fuel system. A carefully tuned carburetor was sufficient.

20905 CATALYST
20905-H7401 
* JAPAN B211 A12.S,K 7512-
* JAPAN HB211 A14.S,K 7512-
* JAPAN GB211 L16 7602- (51 year standard)
* not used on Van

E

"E"

1978 emission standard (Showa 53 Year)

53年度排出ガス規制適合車

L

23169.jpg

R

25511.jpg