![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 21:06, 5 May 2015 ddgonzal (Talk | contribs) <- Previous diff |
Current revision ddgonzal (Talk | contribs) |
||
| Line 2: | Line 2: | ||
| = Overview = | = Overview = | ||
| - | + | Minimum order 100 quantity | |
| - | http://datsun1200.com/uploads/newbb/174_4c45173605e21.jpg | + | <br>{{Upload|174_4c45173605e21.jpg}} |
| - | <br>Minimum order 100 quantity | + | |
| * This is not a Hitachi carburetor, but is close. | * This is not a Hitachi carburetor, but is close. | ||
| - | |||
| * Advertised as 16010-H1602, which is USA part number, but the photo matches the original 16010-H1000 more closely than the USA version, except that it has a plug where the Anti-Diesel valve goes (which is only on 1973-up USA carburetors). | * Advertised as 16010-H1602, which is USA part number, but the photo matches the original 16010-H1000 more closely than the USA version, except that it has a plug where the Anti-Diesel valve goes (which is only on 1973-up USA carburetors). | ||
| - | |||
| * The jets are not stamped with an ID number | * The jets are not stamped with an ID number | ||
| - | [http://datsun1200.com/uploads/newbb/6595_4cdba90c83bb0.jpg photo] | + | {{Upload|6595_4cdba90c83bb0.jpg}} |
| - | <br><img size=400>http://datsun1200.com/uploads/newbb/6595_4cdba90c83bb0.jpg</img> | + | |
| = Review = | = Review = | ||
| - | |||
| thomen said: | thomen said: | ||
| <blockquote><hr>16 January 2011 | <blockquote><hr>16 January 2011 | ||
| a much better improvement over the old [worn out] one! just had to swap my choke cable round to the other side and done! ... | a much better improvement over the old [worn out] one! just had to swap my choke cable round to the other side and done! ... | ||
| - | |||
| 15 March 2011 | 15 March 2011 | ||
| Line 30: | Line 24: | ||
| = Comparision with H1000 = | = Comparision with H1000 = | ||
| - | + | {{Upload|6595_4cdba9409c7fa.jpg}} {{Upload|6595_4cdba9d1b1bcd.jpg}} {{Upload|6595_4cdba9e5b584e.jpg}} | |
| - | [http://datsun1200.com/uploads/newbb/6595_4cdba9409c7fa.jpg photo] <img size=140>http://datsun1200.com/uploads/newbb/6595_4cdba9409c7fa.jpg</img> [http://datsun1200.com/uploads/newbb/thumbs/6595_4cdba9d1b1bcd.jpg photo] <img size=140>http://datsun1200.com/uploads/newbb/thumbs/6595_4cdba9d1b1bcd.jpg</img> [http://datsun1200.com/uploads/newbb/thumbs/6595_4cdba9e5b584e.jpg photo] <img size=140>http://datsun1200.com/uploads/newbb/thumbs/6595_4cdba9e5b584e.jpg</img> | + | |
| [[Category:Fuel System]] | [[Category:Fuel System]] | ||
| - | [[Category:Hitachi 306 Carburetor]] | + | [[Category:Hitachi 306 Carburetor]]{{End}} |
Current revision
Chinese-made "16010-H1602" clone of Hitachi DCG306 carburetor for Datsun 1200. They have been sold on eBay and also by Bprojects.
[edit]
Overview
Minimum order 100 quantity
- This is not a Hitachi carburetor, but is close.
- Advertised as 16010-H1602, which is USA part number, but the photo matches the original 16010-H1000 more closely than the USA version, except that it has a plug where the Anti-Diesel valve goes (which is only on 1973-up USA carburetors).
- The jets are not stamped with an ID number
[edit]
Review
thomen said:
16 January 2011a much better improvement over the old [worn out] one! just had to swap my choke cable round to the other side and done! ...
15 March 2011
the one I bought (i posted about it in this post) and fitted is not running right.. mechanic has said it might be the float or jet setup... is not running right... I'm not sure
[edit]
Comparision with H1000
¤