Revision as of 22:53, 20 December 2009 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 02:56, 14 March 2010 ddgonzal (Talk | contribs) Next diff -> |
||
Line 1: | Line 1: | ||
+ | |||
+ | = Adjustment = | ||
+ | |||
+ | == Brake Pedal == | ||
+ | [http://datsun1200.com/modules/myalbum/photo.php?lid=21609 http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/uploads/photos/21609.jpg] | ||
+ | |||
+ | # Loosen the stopper nut | ||
+ | # Measure height of pedal. It should be 143.5 mm. Insert shims on outside of firewall until height is 143.5 mm | ||
+ | # Tighten stopper until height is 139.5 to 143.5 mm. Tighten stopper nut. | ||
+ | # Double-check free play (5-15 mm) | ||
+ | # Double-check total travel of pedal (120mm) | ||
+ | |||
+ | == Clutch Pedal == | ||
+ | See: | ||
+ | * [[Hydraulic clutch adjustment]] | ||
+ | * [[Clutch#Adjustment|Cable clutch pedal adjustment]] | ||
+ | |||
+ | = Part Numbers = | ||
Pedal bushing: B10, B110, B210 & B310 USA & JDM: | Pedal bushing: B10, B110, B210 & B310 USA & JDM: | ||
* 46525-18000 BUSHING-pedal fulcrum (2) | * 46525-18000 BUSHING-pedal fulcrum (2) |
Revision as of 02:56, 14 March 2010
Contents |
Adjustment
Brake Pedal
- Loosen the stopper nut
- Measure height of pedal. It should be 143.5 mm. Insert shims on outside of firewall until height is 143.5 mm
- Tighten stopper until height is 139.5 to 143.5 mm. Tighten stopper nut.
- Double-check free play (5-15 mm)
- Double-check total travel of pedal (120mm)
Clutch Pedal
See:
Part Numbers
Pedal bushing: B10, B110, B210 & B310 USA & JDM:
- 46525-18000 BUSHING-pedal fulcrum (2)
- replaced by 46525-N8200 0880-up $1.64 USD
- 46512-H0101 RUBBER-BRAKE PEDAL STOPPER $3.00 USD
- 46531-18001 COVER-PEDAL PAD for BRAKE MANUAL $2.52
- 46531-20301 COVER-PEDAL PAD for BRAKE AUTOMATIC NLA
- 46525-18000 BUSH-PEDAL FULCRUM for CLUTCH $1.64 USD
- 46531-M3000 COVER-PEDAL PAD for CLUTCH $2.52 USD
- formerly 46531-18001