Overview

The pedal boxes are the same manual & auto, but brake pedal width differs. Brake pedal looks the same RHD and LHD. Clutch pedal differs LHD vs RHD. In Oct 1989 they changed the pedals to use a different pads - they may be interchangeable with earlier pedals.

Throttle Pedal

The accelerator is attached to the firewall, outside of the pedal box.

See main article: Accelerator Pedal

Adjustment

Brake Pedal

Loosen the stopper nut
Measure height of pedal. It should be 143.5 mm. Insert shims on outside of firewall until height is 143.5 mm
Tighten stopper until height is 139.5 to 143.5 mm. Tighten stopper nut.
Double-check free play (5-15 mm)
Double-check total travel of pedal (120mm)

Clutch Pedal

See:

Accelerator Pedal

See Accelerator Pedal

Part Numbers

Also See: 
Brake Pedal Part Numbers
Clutch Pedal Part Numbers

Pedal bushing
46525-18000 BUSHING-pedal fulcrum (2)
* replaced by 46525-N8200 0880-up $1.64 USD
* Fits B10, B110, B210 & B310 USA & JDM

Pedal shaft, nut & washer with bushings fitted

Pedal Rubber

46531-18001 COVER-PEDAL PAD for BRAKE MANUAL $2.52 
46531-20301 COVER-PEDAL PAD for BRAKE AUTOMATIC NLA 
46531-M3000 COVER-PEDAL PAD for CLUTCH $2.52 USD 
* formerly 46531-18001

46512-H0101 RUBBER-BRAKE PEDAL STOPPER $3.00 USD
* Will Fit With Most Nissans

46512-H0101

Clear: 46584-S0100, Green: 46512-H0101

Broken and new parts

B140

1400 vs 1200 boxes

B210

B210 manual pedal boxes have an extension welded on the left side. So they are not interchangeable with auto pedal boxes. Brake booster makes a difference too.

B210 JDM Pedal Box
 MANUAL TRANSMISSION
  45670-H5000 Manual A12
  45670-H5800 Manual for use with booster
  * A12 GX,MTM OPT GL,MTM from '75-4
 AUTOMATIC TRANSMISSION
  45670-H5020 Automatic A12 1973-1975
  45670-H5820 Automatic for use with booster
  * GX,ATM OPT GL,ATM from '75-4
 MTM: GX マスターバック, GL ラインオプョン

Non-booster vs Booster pedals (B210). Note provision for Clutch Master Cylinder on the new type
full