CA

Mini ME

181rwkw @ 12psi

Valvebounce Engineering (ACT) built this SR20DET-powered ute (finished July 2005) for Jared
Album 5290 Album 2769

Colour: Lamborghini Giallo Spider
Wheels: Compomotive
Diff: VN V8 LSD and rear disc brakes installed - fitted by M&A Engineering
Brakes: Commodore Calipers and Verada discs installed - supplied by Stewart Wilkins Racing, New brake lines installed including a brake bias switch
Rear brakes are VN V8 discs and calipers (shortened axel modified BW LSD diff out of a VN V8 Commodore). The brakes also use a brake bias switch (must be set and disabled for rego)
Fuel: Fuel cell installed replacing standard fuel tank running a Walbro pump
Engine: S13 SR20DET rebuilt and installed - Fabrication by Valvebounce Engineering & the owner
Gearbox: S13 Gearbox used with new transmission tunnel - Fabrication by Valvebounce Engineering
Turbo: GCG GT28 Turbo replaces standard T25g
Intercooler: Front Mount Intercooler made by PWR, piping designed by Valvebounce Engineering & the owner, welding by Dunbar
Interior: Sparco seats installed, Full range of Autometer guages installed in custom dash work performed by Kam Motor Trimming
Radiator: Commodore Radiator installed
Computer: Microtech

S13 SR20DET with stock bottom mount exhaust manifold
Album 3039 Album 5288 Album 5289 Post click for topic Post click for topic Post click for topic

This page has been accessed 5,145 times. This page was last modified 19:50, 21 June 2018. Content is available under Datsun 1200 Club.