User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Seat Rails

Revision as of 05:52, 9 May 2015; view current revision
<-Older revision | Newer revision->

Datsun 1200 encyclopedia | Recent changes | Edit this page | Page history | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision
Category: Interior

Seat rails are two kinds: 1) Full adjustable fore-aft sliding 2) Non-sliding (truck passenger side).

Contents

Overview

Unbolt the rails from your seats and bolt them to the new seat.

Left side seat - Coupe & all USA (sedan & coupe)
5185.jpg Seat Slide (aka Seat Rail)

Dimensions - Bolt holes To floor

  • Side to side: 15-11/16 inch
  • Front to back: 12-3/16 inch

034.jpg

USA seat with switch
14991.jpg 14976.jpg

Left seat slide
th_035.jpg th_036.jpg

Left side Rail

Left-hand Slide

B110 rails in B10 (one-piece slide cut into two)
21712.jpg

Location

The seat rails bolt to the floor risers.

Front Riser "A", Rear risers "B" and "C"
fullsize

Lowering

Seat Rail

photo

photo

photo

photo

Converter Seats

1200s from Oct 1989 have a Catalytic Convertor.

Passenger side rail is shaped differently to clear the Catalytic Convertor bulge in the floor
19043.jpg

Truck

Truck driver's seat has an adjustable slide. The passenger seat is a fixed (non-adjustable) "seat riser" bracket.

87500-G1000 SLIDE ASS'Y-driver seat ドライバ- シート スライド -1974
87501-G1000 SLIDE-RH SEAT, OUTSIDE スライド、RH シート アウトサイド
87502-G1000 SLIDE-RH SEAT, INSIDE スライド、RH シート インサイド
87556
87505-G1000 BRACKET ASSY-FRONT SEAT, LH ブラクット アッセンブリ、フロント シートLH
 RISER ASS'Y-seat シート ライザー
 [non-adjustable] 
08110-81862 BOLT fixing slide to floor (8)
08915-43810 WASHER fixing slide to floor (8)
08310-82014 SCREW fixing slide to seat (8)
 08310-81812 -7510
08915-13810 WASHER fixing slide to seat (8)

Bride

The famous Bride rails for Sunny Truck
19043.jpg
200 mm seat travel fore-to-aft

Late Sunny Truck with converter bulge 1989-up
Left seat Dimensions - Bolt holes To floor

  • Side to side: 15-11/16 inch
  • Front to back (left side): 12-3/16 inch
  • Front to back (right side) goes 1-1/2 farther back, and 1-1/2 farther forward compared to left side
    • slanted tabs
      15-1/2" at base, 16-1/4" at bottom edges
      front tab: 1-7/16" long
      rear tab: 1-3/8" long

Bride B122 Part Numbers

  • LH: code N030VO type V*1 TTM-L No. 939063
  • RH: code N029VO type V*1 TTM-L No. 939064
  • V type: for Bride full bucket, 30 mm height
  • S type: for Bride reclining seat
  • VF type: for Bride full bucket, no slide (fixed position)

Photo Index

th_000.jpg th_001.jpg th_002.jpg th_003.jpg th_004.jpg th_005.jpg th_006.jpg th_007.jpg th_008.jpg th_009.jpg th_010.jpg th_011.jpg th_012.jpg th_013.jpg th_014.jpg th_015.jpg th_016.jpg th_017.jpg th_018.jpg th_019.jpg th_020.jpg th_021.jpg th_022.jpg th_023.jpg th_024.jpg th_025.jpg th_026.jpg th_027.jpg th_028.jpg th_029.jpg th_030.jpg th_031.jpg th_032.jpg th_033.jpg th_037.jpg th_038.jpg th_039.jpg

シート スリイド シート リイザー ブラケット