Seat belts

Revision as of 07:58, 27 December 2007; view current revision
<-Older revision | Newer revision->

USA 1972 Owners manual (see pages 1-2 for seat belt information): The two front seat belts are of a three point type consisting of lap and shoulder belts. The two rear seat belts are of a two-point type.

Aussie racing JDM fix-it

Seat Belt Warning System

USA models have a warning system. If the seat is occupied, the weight switch sounds a buzzer unless the belt is fastened.

USA 1972 Owners manual (see pages 9 for warning system):

The buzzer is located under the dash. Here is a 1971 dash showing where it bolts:

1972 location, under passenger side of dash:

Wiring

Seat Belt Buzzer wiring schematic:

Relay (switch) Wiring Colors:

• White - to warning buzzer
• Red - to 15A fuse in Fuse box (IGN side), L (blue) wire at box

Buzzer

• Red - through door switches to ground

  (BR wires on door switch)

• W - to warning switch

Variations

Early USA models came with either 2-point (lap-belt only) or 3-point (lap + shoulder) belts. Both front and rear belts are standard equipment.

• All 1972 models use 3-point belts
• From 0172, retractor system was used front and rear
• Rear set had 2-point belts
• Rear Optional was 3-point belts