User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Shortening struts

(Difference between revisions)

Datsun 1200 encyclopedia | Recent changes | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision
Categories: Suspension Modifications | Lowering

Revision as of 22:34, 9 November 2015
ddgonzal (Talk | contribs)

<- Previous diff
Revision as of 06:36, 12 November 2015
ddgonzal (Talk | contribs)

Next diff ->
Line 1: Line 1:
-If you lower your car very much, the strut will start bottoming out. To mitigate this, shorten the strut. It's easy and can be done with or without welding.+If you lower your car more than 2 inches, the [[strut]] will start bottoming out. To mitigate this, shorten the strut. It's easy and can be done with or without welding.
= Overview = = Overview =
 +Strut before and after shortening
 +<br>[http://datsun1200.com/modules/myalbum/photo.php?lid=9799 http://datsun1200.com/modules/myalbum/photos/9799.jpg]
 +<br>Also, the stock spring seat has been replaced with an adjustable version
 +
# Cut tube in section. Don't cut towards the top as you need to preserve the internal tube threads for the strut gland nut # Cut tube in section. Don't cut towards the top as you need to preserve the internal tube threads for the strut gland nut
# using your chosen short insert, shorten the tube to suit # using your chosen short insert, shorten the tube to suit
Line 8: Line 12:
Additionally, you may choose to re-position the lower spring seat (or coilover adjustable sleeve) in a way that the leaves enough clearance for tyres. Additionally, you may choose to re-position the lower spring seat (or coilover adjustable sleeve) in a way that the leaves enough clearance for tyres.
-[http://datsun1200.com/modules/myalbum/photo.php?lid=9799 http://datsun1200.com/modules/myalbum/photos/9799.jpg]+# Remove the strut/spring/brake assembly, then remove the spring and the strut shaft/insert.
 +# Grind the lower spring perch free from the strut tube.
 +# Cut the strut to the length you want. For a three-inch lowering job, cut the strut three inches. Have a machinist cut new internal threads for the large gland nut
 +# place the spring perch where you want it and fasten securely. You can have it re-welded or use a commercial-grade shaft collar.
= Remove Spring Perch = = Remove Spring Perch =
Use a handheld grinder or a bench grinder. Be careful not to cut through the stut tube. Use a handheld grinder or a bench grinder. Be careful not to cut through the stut tube.
- 
-= Overview = 
-Remove the strut/spring/brake assembly, then remove the spring and the strut shaft/insert. 
- 
-Grind the lower spring perch free from the strut tube. 
- 
-Cut the strut to the length you want. For a three-inch lowering job, cut the strut three inches. 
- 
-Then place the spring perch where you want it and fasten securely. You can have it re-welded or use a commercial-grade shaft collar. 
= Cutting Strut Tube = = Cutting Strut Tube =

Revision as of 06:36, 12 November 2015

If you lower your car more than 2 inches, the strut will start bottoming out. To mitigate this, shorten the strut. It's easy and can be done with or without welding.

Contents

Overview

Strut before and after shortening
9799.jpg
Also, the stock spring seat has been replaced with an adjustable version

  1. Cut tube in section. Don't cut towards the top as you need to preserve the internal tube threads for the strut gland nut
  2. using your chosen short insert, shorten the tube to suit
  3. leaving old inserts in the strut (covered in a smear of oil) stitch weld the tube back and grind back to the diameter. don't let it get too hot or you'll have an oil fire.

Additionally, you may choose to re-position the lower spring seat (or coilover adjustable sleeve) in a way that the leaves enough clearance for tyres.

  1. Remove the strut/spring/brake assembly, then remove the spring and the strut shaft/insert.
  2. Grind the lower spring perch free from the strut tube.
  3. Cut the strut to the length you want. For a three-inch lowering job, cut the strut three inches. Have a machinist cut new internal threads for the large gland nut
  4. place the spring perch where you want it and fasten securely. You can have it re-welded or use a commercial-grade shaft collar.

Remove Spring Perch

Use a handheld grinder or a bench grinder. Be careful not to cut through the stut tube.

Cutting Strut Tube

Can a cheap tube cutter do the job? A pipe cutter might work but they're actually quite thick walled tubing so it might take a bit!

A good old drop saw (chop saw) does the trick on the tubes. It will hold the tube perfectly square and just cut it through (after removing the strut piston/insert of course).

Cut down, spring perch welds ground off
th_BEE5E4DA-orig.jpg

Ready to prime (use weld through primer to seal under where the spring seat will go)
th_4DB087D6-orig.jpg

Primed, now ready for fastening the spring seat
th_D8A3DC68-orig.jpg

Fasten Lower Spring Seat

You can place the spring perch where you want it and fasten securely. You can have it re-welded or use a commercial-grade shaft collar.

See main article: Fastening Spring Seats