Steering Linkage

Revision as of 03:42, 5 February 2009; view current revision
<-Older revision | Newer revision->

The Datsun 1200 uses a tradition recirculating-ball Steering Gearbox with behind-the axle linkage.

Terminology

• 1. Idler Arm. This bolts to the subframe rail on opposite side from the steering gearbox
• 9. Steering Gear Arm, a.k.a. "Pitman arm"
• 19,20. Side Rod, a.k.a. "tie rod". Left and right hand differ
• 12. Cross Rod, a.k.a. "drag link" or "center link"
• 21, 22, 23, 24. Side Rod Socket Ass'y a.k.a. "tie rod ends". There are four separate parts with left and right-hand threads. Each "socket" has a "ball stud", which is similar to a Ball Joint.

The six ball studs have a Filler Plug on the bottom of each. Replace it with a grease fitting and fill it during each periodic "lube, oil and filter".

Power Steering

Sunny Trucks had optional power steering:

Part Numbers

Idler Arm Bushing

• 48544-H1000 BUSH-IDLER
  • B10: 48545-18001 BUSHING-idler shaft
• BECK/ARNLEY Part # 1013851 (2 per idler arm) at http://rockauto.com