Revision as of 17:54, 22 October 2019 ddgonzal (Talk | contribs) (->Overview) <- Previous diff |
Revision as of 17:59, 22 October 2019 ddgonzal (Talk | contribs) (->Early Type) Next diff -> |
||
Line 14: | Line 14: | ||
Switch for Temperature Gauge (thermal transmitter) | Switch for Temperature Gauge (thermal transmitter) | ||
Nissan 25080-89900 GAUGE-TEMP ENGINE UNIT | Nissan 25080-89900 GAUGE-TEMP ENGINE UNIT | ||
- | * [http://www.rockauto.com/catalog/x,carcod,1208483,parttype,4748 Rockauto.com] | + | [http://www.rockauto.com/catalog/x,carcod,1208483,parttype,4748 Rockauto.com] |
* BECK/ARNLEY 2010247 $8.16 | * BECK/ARNLEY 2010247 $8.16 | ||
* Airtex 1T1181 | * Airtex 1T1181 | ||
Line 24: | Line 24: | ||
25251-30100 NUT [Threads for engine unit] is required. You can re-use your old one. | 25251-30100 NUT [Threads for engine unit] is required. You can re-use your old one. | ||
- | <br>{{Photo|25080-89900-1.jpg|Datsun%201200/Parts}} {{Photo|25080-89900-1-1.jpg|Datsun%201200/Parts}} | + | <br>{{UploadPost|174_5daeec67a8849.jpg|492932|was=25080-89900-1.jpg-Datsun%201200/Parts}} {{UploadPost|174_5daeec6f34ed7.jpg|492932|was=25080-89900-1-1.jpg-Datsun%201200/Parts}} |
25080-89902 and some aftermarket have integral threads, such as this Airtex T1181: | 25080-89902 and some aftermarket have integral threads, such as this Airtex T1181: | ||
- | <br>{{Photo|T1181.jpg|Datsun%201200/Parts}} | + | <br>{{UploadPost|174_5daeec8059c40.jpg|492932|was=T1181.jpg-Datsun%201200/Parts}} |
<br>[http://www.rockauto.com/catalog/x,carcode,1208483,parttype,4748 RockAuto.com] | <br>[http://www.rockauto.com/catalog/x,carcode,1208483,parttype,4748 RockAuto.com] | ||
Revision as of 17:59, 22 October 2019
The temperature sender is called the thermal transmitter by Datsun. a.k.a. temp sensor. If varies resistance according to temperature, thus causing the Temperature Gauge to display the correct temperature.
Contents |
Overview
Early: Bullet connector type 1970-1981 Late: Spade connector type 1982-
Transmitter at right front corner of head
Transmitter is at very front of right side, pointing up. it has a threaded collar nut to hold it in.
Early Type
Switch for Temperature Gauge (thermal transmitter) Nissan 25080-89900 GAUGE-TEMP ENGINE UNIT Rockauto.com * BECK/ARNLEY 2010247 $8.16 * Airtex 1T1181 * STANDARD MOTOR PRODUCTS TS69 * ACDELCO E8041, 19107020 Most 1970s Datsuns * M16 X 1.50 metric threads
25251-30100 NUT [Threads for engine unit] is required. You can re-use your old one.
25080-89902 and some aftermarket have integral threads, such as this Airtex T1181:
RockAuto.com
Interchange 1971-1973 1200 1973-1976 610 1968-1970 1600 Roadster 1975-1979 620 1968-1970 2000 Roadster 1972-1974 620Pickup 1977-1983 200SX 1974-1977 710 1987-1988 200SX 1980-1985 720 1979-1982 210 1977-1979 810 1970-1973 240Z 1981 810 1974-1975 260Z 1974-1978 B210 1975-1978 280Z 1986 D21 Pickup 1979-1983 280ZX 1976-1978 F10 1980-1982 310 1982-1983 Maxima 1968-1973 510 1983-1986 PulsarNX 1978-1981 510 1983 Sentra 1968 520 Pickup 1982-1986 Stanza 1969-1972 521 Pickup
25080-89900 GAUGE-TEMP ENGINE UNIT * 720 with Z20/Z22/Z24 engines * 910 with L24 engine * B11 with E15/E16 engine * N10 Pulsar with A14/A15/E15 engines * N12 Pulsar with E15ET engine * S110 Z20E/Z22E * S12 CA18ET/CA20E * T11 CA20S/CA20E Beck/Arnley 2010247 Water Temperature Switch $17.49 at schucks.com Standard Motor Products TS69 Engine Coolant Temperature Sender
Late Type
25080-89912 A-series 8202- 2508089902 Subaru 25080-89902 Nissan * M16 x 1.5 threads * 17 mm hex
Most 1980s Nissan (spade connector type)
Other Nissan Types
non-1200 thermal transmitters include:
25080-89900 two-piece, 4mm diameter bullet type 25080-89901 25080-89902 M16 large type, one piece 25080-89903 M12 small type 25080-89905 for digital meter, spade, M16 x 1.5 25080-89912 spade type 25080-62200 nut type * Sankei KW-2N
25080-62200 nut type - Datsun B10
Wiring
Main: Temperature Gauge#Wiring
Troubleshooting
See also: Temperature Gauge#Troubleshooting
Nissan Electrical
From the 1973 Datsun 1200 Factory Service Manual.
Ohms Temp 100 50C (122F)
¤