![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 03:21, 15 August 2009 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 04:56, 19 October 2009 ddgonzal (Talk | contribs) (->Left-Hand Drive) Next diff -> |
||
| Line 18: | Line 18: | ||
| = Left-Hand Drive = | = Left-Hand Drive = | ||
| - | * B110: 18200-H1600 ASSY-WIRE ACCELERATOR [40 mm length] | + | * B110: A8200-G1300 ASSY-WIRE ACCELERATOR [40 mm length] |
| + | ** Superceded old part number 18200-H1600 | ||
| [http://datsun1200.com/modules/myalbum/photo.php?lid=15318 http://datsun1200.com/modules/myalbum/photos/15318.jpg] | [http://datsun1200.com/modules/myalbum/photo.php?lid=15318 http://datsun1200.com/modules/myalbum/photos/15318.jpg] | ||
| Line 26: | Line 27: | ||
| * B210: 43.5 mm long ball-end | * B210: 43.5 mm long ball-end | ||
| * B310: 40 mm long eyelet-end | * B310: 40 mm long eyelet-end | ||
| - | |||
| = Right-Hand Drive= | = Right-Hand Drive= | ||
Revision as of 04:56, 19 October 2009
Datsun 1200 uses a throttle cable with twisted-braid steel core. A cable is better than linkage for smooth throttle action. RHD and LHD differ by length.
Contents |
Ends
Both RHD and LHD use the same clip on the interior to fix the cable to the Accelerator Pedal.
- 18036-18000 SPRING-CLAMP ACCELERATOR WIRE
- fixes cable to accelerator pedal
Ferrule end (that clamps to the carburetor)
- 8mm diameter x 21mm long ALL
Cable
Since the carburetor is always on the same side, the accelerator cable length is different for RHD and LHD models.
Left-Hand Drive
- B110: A8200-G1300 ASSY-WIRE ACCELERATOR [40 mm length]
- Superceded old part number 18200-H1600
Length measured firewall to end of cable ferrule
- B110: 40 mm long ball-end
- B210: 43.5 mm long ball-end
- B310: 40 mm long eyelet-end
Right-Hand Drive
- 18200-H1000 WIRE ASS'Y-accelerator B110 [85 cm length, tube 72cm]
- 18211-18001 RING-wire clamp
- 18200-G1601 ASSY-WIRE ACCELERATOR B120 -8910
- 18201-95W00 ASSY-WIRE ACCELERATOR B120 8910-
- 24222-89901 CLIP-WIRE, ACCELERATOR 9810-
Other Part Numbers
- 18200-18000 WIRE ASS'Y-accelerator B10 superceded
- 18200-18001 WIRE ASS'Y-accelerator B10 replaces 18200-18000
- 18200-27700 WIRE ASS'Y-accelerator B10 replaces 18200-18001
- 18200-H5000 WIRE ASS'Y-ACCELERATOR B210 early
- 18200-H5005 WIRE ASS'Y-ACCELERATOR B210 early GL op. and late B210
- 18200-H5205 WIRE ASS'Y-ACCELERATOR B210 GX A12T
- 18200-H7510 WIRE ASS'Y-ACCELERATOR B210 A14T
- 18200-H7900 WIRE ASS'Y-ACCELERATOR B210 L16
- 18200-H8501 WIRE ASS'Y-ACCELERATOR B310
- 18200-H8502 WIRE ASS'Y-ACCELERATOR B310
- 18200-H9205 WIRE ASS'Y-ACCELERATOR B310 A14E, A15E
GX Cable Routing
GX uses same cable as others RHD Datsun 1200s.
Weber DGV Cable
Sidedraft Cable
