![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 02:30, 4 April 2014 ddgonzal (Talk | contribs) <- Previous diff |
Current revision ddgonzal (Talk | contribs) |
||
| Line 1: | Line 1: | ||
| - | The '''W50''' [[Toyota 5-speed]] can be fitted to a Datsun A-series engine. Use an A-series automatic transmission bellhousing with an adapter plate to fit the W50 gearbox. | + | #REDIRECT [[W Gearbox]] |
| - | + | ||
| - | = Overview = | + | |
| - | Bare adaptor plate to suit an A series auto bell housing and a W50 steel case Celica 5 speed | + | |
| - | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=6899 http://datsun1200.com/uploads/thumbs/6899.jpg] | + | |
| - | + | ||
| - | Adaptor plate bolted to Celica box, clutch fork pivot fitted. | + | |
| - | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=6900 http://datsun1200.com/uploads/thumbs/6900.jpg] | + | |
| - | + | ||
| - | Datsun 56A 4-speed verses a Celica W50 steel case 5-speed fitted with an A series auto bell housing and adaptor plate. | + | |
| - | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=6902 http://datsun1200.com/uploads/thumbs/6902.jpg] | + | |
| - | + | ||
| - | Above: A series 56A 4-speed | + | |
| - | <br>Below: W50 Celica 5-speed below. Modified Datsun clutch fork fitted to Celica thrust bearing. Slot cut through the side of an A series auto bell housing . Clutch fork retaining spring and clutch cable mount still to be made. | + | |
| - | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=6901 http://datsun1200.com/uploads/thumbs/6901.jpg] | + | |
| - | + | ||
| - | The input spline lines up exactly | + | |
| - | + | ||
| - | The spigot fits into the back of the A-series crankshaft as per standard but a machined spigot bearing needs to be made to suit the Celica input shaft. | + | |
| - | + | ||
| - | mods need to be made to the clutch fork , thrust baring carrier | + | |
| - | + | ||
| - | A new cross member needs to be made , the tunnel needs a bit of a massage | + | |
| - | + | ||
| - | the speedo cable matches up to the Celica box with no mods. | + | |
| - | + | ||
| - | A clutch needs to be sorted out , a new spiggot baring needs to be made and a new tailshaft is needed. | + | |
| - | + | ||
| - | [http://datsun1200.com/userinfo.php?uid=324 funkeyman] photos | + | |
| - | + | ||
| - | + | ||
| - | [http://datsun1200.com/modules/newbb/viewtopic.php?post_id=81477#forumpost81477 clubman] adapter | + | |
| - | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=6895 http://datsun1200.com/uploads/thumbs/6895.jpg] | + | |
| - | + | ||
| - | [http://datsun1200.com/modules/myalbum/photo.php?lid=6894 http://datsun1200.com/uploads/thumbs/6894.jpg] | + | |
| - | + | ||
| - | [[Category:Transmission_Modifications]] | + | |
Current revision
- REDIRECT W Gearbox