Zenith EFI

(Difference between revisions)

Revision as of 08:42, 18 January 2016

Zenith ZEEMS fuel injection for Nissan A15 engine (injector and fuel inlet at top)
post

* Fuel pump: Walbro GSL395 (40-50 psi)
* 15 psi injector
* 15 psi fuel regulator
* Throttle body has coolant connections
* Uses stock Sunny Truck electronic distributor 22100-G5110
* ECT sensor goes in back of head (heater hose port)

full

PROCHEM SERVICE PARTS LIST
ZEEMS I A15 CERTIFIED FUEL SYSTEM
ITEM # PART DESCRIPTION SERVICE PART NUMBER
1 THROTTLE BODY ASSY. W/O ECU C282-20098
2 GASOLINE INJECTOR (O-RINGS INCL.) C282-366
2A O-RING KIT (GASOLINE INJECTOR & FUEL PRESSURE REG.) C282-14
3 GASOLINE FUEL PRESSURE REGULATOR C282-281
4 AIR TEMPERATURE SENSOR C282-6
5 MANIFOLD ABSOLUTE PRESSURE SENSOR (MAP) C282-239
6 MANIFOLD GASKET KIT C282-362
7 ENGINE COOLANT TEMPERATURE SENSOR (ECT) C282-298
8 MANIFOLD ADAPTOR KIT W/ HARDWARE & GASKETS C282-347
9 HEAT SHIELD B190-176
10 OXYGEN SENSOR C282-355
11 ENGINE WIRING HARNESS E784-161
12 GASOLINE FUEL PUMP C282-238
13 GASOLINE FUEL FILTER (3/8" BARB) C282-224
14 ENGINE CONTROL UNIT (ECU) C282-326-44

* KIT, GSKT, MANFLD
* HARNESS, ENG, A-15, EFI, ZEEMS
* ASSY, THROTTLE BDY, W/O ECU
* SENSOR, COOLANT, A15, EFI
* SENSOR, AIR TEMP, A15, EFI
* SENSOR, MAP, A15, EFI
* ECU, NISSAN, A15, EFI
* FILTER, FUEL, EFI
* PUMP, FUEL, EFI
* SENSOR, OXY, A15, EFI
* O-RING KIT, FUEL PRESS & INJ
* REGULATOR, FUEL PRESSURE
* INJECTOR, GASOLINE (O-RING INCL.)

Zenith ECU
post

post

A15 Industrial Engine

Zenith Power Products Industrial Engine
http://zenithpp.com/engines_a15.htm
Intermittent output (SAE Gross J1349) 46 HP/3,600 rpm 
Continuous output (SAE Gross J1349) 39 HP/3,600 rpm 
Peak torque (SAE Gross J1349) 11 kg-m (80 ft-lb)/2,200 rpm 
Minimum fuel consumption 225g/Hp-hr (0.496 lb/HP-hr)/3,200 rpm 
Fuel and type Gasoline, 4-cycle, O.H.V. 
Cylinder arrangement 4 in-line 
Combustion chamber Wedge shape 
Bore x stroke 76mm x 82mm (2.99 x 3.23 in) 
Total piston displacement 1,487 cc (90.74 cu in) 
Compression ratio 9.0 : 1 
Length x width x height (standard model) 
  527.8 x 530.8 x 576.3mm (20.78 x 20.90 x 22.69 in) 
Dry weight (standard model)* 103kg (227 lb)

Zenith Fuel Injection
post

governor

Throttle body bolts to adapter on stock manifold

IAT (Intake Air Temperature) in intake tube

MAP sensor bolts to back of throttle body

wiring diagram
full