| Engine Bay
 ca18_datto  new 1200  2003/4/8 1:11  Tell a friend
 5409  12  0.00 (0 votes)
|
| Interior
Davo1200 Davo1200 2003/4/6 6:06 Tell a friend
2724 0  5.50 (2 votes)
| Old recaros, batman wheel, clean dash, temp, oil press gauge (cant see), short shift, no heater, no stereo, no rear seat, no accel pedal, pretty bare. |
|
| Differential
Davo1200 Davo1200 2003/4/6 5:56 Tell a friend
2940 1 0.00 (0 votes)
| 10 bolt Salsbury. Skyline disc's and calipers. Cut down to 1405mm track width. |
|
| Springs and Shocks
Davo1200 Davo1200 2003/4/6 5:51 Tell a friend
2547 0 0.00 (0 votes)
| This is the rear end setup of my 1200 Coupe. Reversed springs, koni shocks, ford d-clamps on modified 1200 shock plate, braided brake line. |
|
| My new 510 (1600)
tens_and_twenties Body and Interiors 2003/4/5 6:22 Tell a friend
5528 13 0.00 (0 votes)
| 100% original and staying that way. |
|
| FJ20ET 1200 Ute - engine bay - other side
ca18_datto Engine 2003/4/4 8:39 Tell a friend
5814 3 0.00 (0 votes)
| The engine bay from the opposite side |
|
| FJ20ET 1200 Ute - engine bay
ca18_datto Engine 2003/4/4 8:38 Tell a friend
5599 2 0.00 (0 votes)
| A closer view of the engine bay - what a squeeze. |
|
| FJ20ET 1200 Ute
ca18_datto Engine 2003/4/4 8:36 Tell a friend
5491 1  7.00 (1 vote)
| Whoever said they didn't fit!? lol Here's living proof they do, only after extensive modification to the firewall and trans tunnel. And what a huge intercooler!! Don't have performance figures for this one but I am assuming that it goes VERY hard. ;) |
|
| CA18DET in a 1200 ute - engine bay closeup
ca18_datto Engine 2003/4/4 8:29 Tell a friend
6220 0 0.00 (0 votes)
| A close up of the turbo - still using the standard exhaust manifold but with a larger turbo and dump pipe. |
|
| CA18DET in a 1200 ute - engine bay
ca18_datto Misc 2003/4/4 8:22 Tell a friend
9486 10 0.00 (0 votes)
| A close up of the motor installation - very neat and tidy. :) |
|
