![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 01:45, 29 April 2025 torino120 (Talk | contribs) (Adding current prices for APC) <- Previous diff |
Current revision torino120 (Talk | contribs) |
||
| Line 1: | Line 1: | ||
| [[Fenders]] (guards/wings), [[Overfender Flares]], [[Trunk]] lid (boot), [[Hood]] (bonnet), [[Body|door sills]], [[Rubber parts]], etc. | [[Fenders]] (guards/wings), [[Overfender Flares]], [[Trunk]] lid (boot), [[Hood]] (bonnet), [[Body|door sills]], [[Rubber parts]], etc. | ||
| - | |||
| - | = Suppliers = | ||
| - | * Nissan Dealer | ||
| - | *: Small parts (USA). Major parts are NLA | ||
| - | *: Body panels (Europe and Australia) | ||
| - | |||
| - | * [[Bprojects]] mail order | ||
| - | |||
| - | * [http://www.peterzekert.com/for-sale/other/123-datsun-1200-fiberglass-body-panels Peter Zekert Fiberglass Body Panels] Prices as of May 2015 | ||
| - | *: Bumper/air dam for racing, $225 | ||
| - | *: Bumper/air dam thicker glass for use on street car, $250 | ||
| - | *: front fenders, approximately 2 inches wider than stock 1200 fenders, $175 each | ||
| - | *: extra width front fenders, approximately 4 inches wider than stock 1200 fenders, $175 each | ||
| - | *: Hood, must use hood pins for mounting, $175 | ||
| - | *: Door skin $150 | ||
| - | *: Deck lid $125 | ||
| - | *: Quarter panel $250 | ||
| - | * [http://www.piner.com/japco/ Japco] "race fiberglass" body parts | ||
| - | *: Front Fenders $135 each | ||
| - | *: Rear Fenders $130 each | ||
| - | *: Hood $130 | ||
| - | *: Trunk $65 | ||
| - | *: Doors $65 each | ||
| - | *: Air Dam $150 | ||
| - | |||
| - | * [http://www.showcars-bodyparts.com/datsun.html Showcars Bodyparts] | ||
| - | *: [http://www.showcars-bodyparts.com/spoilerrear.html REAR SPOILER] Part Number g3681 | ||
| - | |||
| - | * http://www.streetstufffibre.co.za | ||
| - | *: [http://datsun1200.com/modules/myalbum/photo.php?lid=15204 http://datsun1200.com/uploads/thumbs/15204.jpg] | ||
| - | * Bonnet | ||
| - | * Doors | ||
| - | * Trunk lid | ||
| - | * rear end | ||
| - | * front end | ||
| - | |||
| - | == New Zealand == | ||
| - | * KENT Distributors in ChristChurch handle new panels for Japanese cars. | ||
| - | * Nissbits Dismantlers | ||
| - | * Fiberglass Auto Replacements phone 068639331 | ||
| - | *: 60mm universal flares $212.63 | ||
| == Australia == | == Australia == | ||
| Line 116: | Line 75: | ||
| :: Rear Lower Quarter Lower Panel $265.00 | :: Rear Lower Quarter Lower Panel $265.00 | ||
| :: Spare Wheel Well $450.00 | :: Spare Wheel Well $450.00 | ||
| + | |||
| + | |||
| + | = Suppliers = | ||
| + | * Nissan Dealer | ||
| + | *: Small parts (USA). Major parts are NLA | ||
| + | *: Body panels (Europe and Australia) | ||
| + | |||
| + | * [[Bprojects]] mail order | ||
| + | |||
| + | * [http://www.peterzekert.com/for-sale/other/123-datsun-1200-fiberglass-body-panels Peter Zekert Fiberglass Body Panels] Prices as of May 2015 | ||
| + | *: Bumper/air dam for racing, $225 | ||
| + | *: Bumper/air dam thicker glass for use on street car, $250 | ||
| + | *: front fenders, approximately 2 inches wider than stock 1200 fenders, $175 each | ||
| + | *: extra width front fenders, approximately 4 inches wider than stock 1200 fenders, $175 each | ||
| + | *: Hood, must use hood pins for mounting, $175 | ||
| + | *: Door skin $150 | ||
| + | *: Deck lid $125 | ||
| + | *: Quarter panel $250 | ||
| + | * [http://www.piner.com/japco/ Japco] "race fiberglass" body parts | ||
| + | *: Front Fenders $135 each | ||
| + | *: Rear Fenders $130 each | ||
| + | *: Hood $130 | ||
| + | *: Trunk $65 | ||
| + | *: Doors $65 each | ||
| + | *: Air Dam $150 | ||
| + | |||
| + | * [http://www.showcars-bodyparts.com/datsun.html Showcars Bodyparts] | ||
| + | *: [http://www.showcars-bodyparts.com/spoilerrear.html REAR SPOILER] Part Number g3681 | ||
| + | |||
| + | * http://www.streetstufffibre.co.za | ||
| + | *: [http://datsun1200.com/modules/myalbum/photo.php?lid=15204 http://datsun1200.com/uploads/thumbs/15204.jpg] | ||
| + | * Bonnet | ||
| + | * Doors | ||
| + | * Trunk lid | ||
| + | * rear end | ||
| + | * front end | ||
| + | |||
| + | == New Zealand == | ||
| + | * KENT Distributors in ChristChurch handle new panels for Japanese cars. | ||
| + | * Nissbits Dismantlers | ||
| + | * Fiberglass Auto Replacements phone 068639331 | ||
| + | *: 60mm universal flares $212.63 | ||
| [[Category:Fibreglass]] | [[Category:Fibreglass]] | ||
| [[Category:Body]] | [[Category:Body]] | ||
Current revision
Fenders (guards/wings), Overfender Flares, Trunk lid (boot), Hood (bonnet), door sills, Rubber parts, etc.
[edit]
Australia
- Panel House Prices as of May 2025
- Sedan/Ute/Wagon/Coupe
- Front Guard LH $135.00
- Front Guard RH $135.00
- Radiator Support $199.00
- Bonnet $225.00
- Front Valance $66.00
- Sedan/Ute/Wagon
- LH Door $265.00
- RH Door $265.00
- Ute
- LH Sill Panel $99.00
- RH Sill Panel $99.00
- LH Quarter $225.00
- RH Quarter $225.00
- Rear Beaver Panel $66.00
- LH Tail Light Panel $99.00
- RH Tail Light Panel $99.00
- Tailgate Handle (Single) $33.00
- Tailgate $225.00
- Automotive Panel Craft (APC) Prices as of May 2025
- Sedan/Ute/Wagon/Coupe
- Waterbox Plenum $195.00
- Front of Engine Bay Skirt $185.00
- Inner Skirt Support $345.00
- Bottom of A Pillar $195.00
- Front Seat Rail $295.00
- Inner Sill $259.00
- Sill Repair Kit $295.00
- Front Floor $350.00
- Under Floor Brace $550.00
- Lower Radiator Support $255.00
- Sedan/Coupe/Wagon
- Inner Sill $295.00
- Sedan/Coupe
- Rear Floor $359.00
- Ute
- Drip Rails $270.00
- Tray Floor $2895.00
- Tray Floor Section $265.00
- Tray Floor Inspection Panel $165.00
- Wheel Tub $759.00
- Rear Floor $359.00
- Inner Sill Pods $295.00
- Coupe
- 1/4 Window Sill $285.00
- A Pillar Drip Rail $125.00
- B Pillar Drip Rail $125.00
- C Pillar Drill Rail $125.00
- Front Door Lower Skin $295.00
- C Pillar Skin $175.00
- Dogleg/Door to Wheel Arch $259.00
- Rear Quarter Lower Panel $265.00
- Rear Beaver Panel $425.00
- Rear Inner Beaver Panel $395.00
- Spare Wheel Base $450.00
- Top of Front Windscreen $370.00
- Top of Rear Windscreen $370.00
- Bottom of Rear Windscreen (Full width) $370.00
- Bottom of Rear Windscreen (LH or RH) $125.00
- Sedan
- Front of Rear wheel Arch $185.00
- Dogleg/Door to Wheel Arch $195.00
- Rear Lower Quarter Lower Panel $265.00
- Spare Wheel Well $450.00
[edit]
Suppliers
- Nissan Dealer
- Small parts (USA). Major parts are NLA
- Body panels (Europe and Australia)
- Bprojects mail order
- Peter Zekert Fiberglass Body Panels Prices as of May 2015
- Bumper/air dam for racing, $225
- Bumper/air dam thicker glass for use on street car, $250
- front fenders, approximately 2 inches wider than stock 1200 fenders, $175 each
- extra width front fenders, approximately 4 inches wider than stock 1200 fenders, $175 each
- Hood, must use hood pins for mounting, $175
- Door skin $150
- Deck lid $125
- Quarter panel $250
- Japco "race fiberglass" body parts
- Front Fenders $135 each
- Rear Fenders $130 each
- Hood $130
- Trunk $65
- Doors $65 each
- Air Dam $150
- Showcars Bodyparts
- REAR SPOILER Part Number g3681
- http://www.streetstufffibre.co.za
-
- Bonnet
- Doors
- Trunk lid
- rear end
- front end
[edit]
New Zealand
- KENT Distributors in ChristChurch handle new panels for Japanese cars.
- Nissbits Dismantlers
- Fiberglass Auto Replacements phone 068639331
- 60mm universal flares $212.63