User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

B210 Bumpers

Revision as of 03:26, 22 February 2017; view current revision
<-Older revision | Newer revision->

Datsun 1200 encyclopedia | Recent changes | Edit this page | Page history | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision
Category: Datsun B210

North American B210s have "park bench" safety bumpers capable of 5 mph collision without damage. Other countries use a stylish chrome small bumper.

Contents

Worldwide Style

Front

H5000 -7701
H7400 7702-
H5800 L16
with upper overrider bar
H7510 A14T twin carb
H7512 *A14T.GX 7702-
overriders 7702-, except DX

12659_4b01296ba506c.jpgUpload click to view 6345.jpgAlbum 6345

PB210/GB211.early (no overrider)
GB211_.jpg

GB211.from_7702 H58 (with overrider)
GB211catalog_.jpg

H50 Front bumpers stays -- All years A12/A14 JAPAN (H58 is for L14/L16)
bs5003.jpg

Rear

Some countries used a narrow license plate cutout (e.g. Japan) and other countries used wide plate cutout (e.g. Australia)

Wide Plate

5138.jpgAlbum 5138 6346.jpgAlbum 6346

Cutout for rear light
4302.jpgAlbum 4302

World Bumper doesn't quite cover holes on North America rear body
ozzy_003.JPG

Narrow Plate

Malaysia
400px-B211-back.jpgWIKI go to Wikipedia

Japan
d75128126pyrex12001-img600x450-1-1.jpg

North America

USA and Canada market. For 1974, USA models got large safety bumpers to meet Federal Motor Vehicle Safety Standards regulation 215(b). The mandate that created the "park-bench" bumpers were not about safety, but part of the Cost Saving Act. The idea was to reduce the cost of repair of minor accidents (below 5 mph) and so benefit the consumer. For more details, see FMVSS 215.

1978Datsun11x8520pp2-5.jpg 14731.jpgAlbum 14731

  • 1974 non-chrome, no rubber overriders, black sight shield
  • 1975 different color, rubber overriders, black sight shield
  • 1976 chrome beam with rubber ends, rubber overriders, Coupe has body color-keyed rear sight shield.
  • 1977-1978. The external appearance of the bumpers has been improved

1974 - no overriders
B210earlygrilleUSA.jpg

1975 - non-chrome with overriders (grille is 1978)
B2101978grillewith1975bumperUSA.jpg

1976 - Chrome beam with many bolts (grille is 1977)
B2101977grilleUSAwrongbadge.jpg

1977 - Chrome beam bumper with fewer bolts
B2101977grillebumperUSA.jpg

Front sight-shield
12274.jpgAlbum 12274

1976 Sedan Rear
P1040725.jpg

Rear panel

A rear panel is used in USA instead of a beaver panel.

  • 1974-1975: body color-keyed
  • 1976-1978 Sedan: body color-keyed
  • 1976-1978 Coupe: black

Retrofitting Worldwide Bumpers

You will need make up new custom brackets to mount the bumpers.

0716122243_zps714c8c31.jpg thumb_ozzy_003.JPG thumb_crappy_005s.jpg

SEDAN REAR: When fitting the smaller bumpers there's two holes, from where the 5mph bumper shocks/brackets mount. And the new bumper covers the top half of them. So a new beaver panel is not really needed.
6208938505_4000d2f426_b.jpg

USA: large holes. Worldwide: small holes
21029.jpgAlbum 21029 19693.jpgAlbum 19693

COUPE REAR: A new beaver plate should be fabricated.
Picture813.jpg

Fabricate a mesh panel:
IMG950155.jpg

FRONT:
2979963373_28e70a676a.jpg 100_3933.jpg IMAG0493.jpg B210earlygrilleUSAmissingbumper.jpg

thumb_crap_005s~0.jpg

NOTE: 1200 bumpers don't quite fit the B210. They need to be bent a little bit, and are narrower.

Barracuda sells B210 bumper in steel about $300

The wide-cutout bumper has just happens to line up perfectly the with lower valence on a North America B210, but the JDM bumper has a smaller plate cut-out, about the size of a US license plate. the JDM bumper makes for a cleaner install, but the wide-cutout bumper may be cheaper and easier to obtain out of Australia. 

¤