14035

Revision as of 01:34, 7 June 2010; view current revision
<-Older revision | Newer revision->

14035 is Nissan Part Numbers type for GASKET-MANIFOLD TO CYLINDER HEAD. Identification includes intake port size, and whether it is a "dry" or "wet" type (if there are any water passages in the gasket).

Round Port

Dry Type

180

180 was parts originally designed for Datsun 1000.

* Dry type
* Original style bolt pattern
14035-18000

H10

H10 was parts originally designed for Datsun 1200.

* Dry 
* Original style bolt pattern
11044-H1000 GASKET-cylinder head [no O-ring]
11044-H1000 GASKET-cylinder head (from '72-5) [can use on earlier head]
* 11045-H1000 RING-"O" (from '72-5)

M30

* Dry Intake 
* New type bolt pattern
11041-M3000

H74

* New type bolt pattern
* Dry type
14035-H7400 A14 Van 7906-, A12 B120 -8109
14035-H7410 8110- A12 B120

Wet Type

G61

Late model A12 (from Oct 1989)
* New Type Bolt Pattern
* Wet Intake
14035-H8501 -9111
14035-H8511 9111-

Oval Ports

All oval port manifolds use the new-type bolt pattern.

Small Oval Port

1974 A13 engine
* 28x30 intake port size
* Dry type (no water ports on manifold face of head)
14035-H6200

Medium Oval Port

EFI Heads (A14E, A15E)
* 28x32 mm intake ports with notch for injector
* Wet type (has intake manifold water ports)
14035-H9201

Regular Oval Port

For A15 and most A14 engines.
* 28x34 mm intake ports

* Dry type (no intake manifold water ports)
14035-H7200 -7906
11044-H7201
14035-H7210 [alternate supplier]

11044-H7860

* Wet type (has intake manifold water ports)
14035-H8901

Large Oval Port

For A12GX Engine and A12T engines
* Port size 30x36 mm
* Wet type (has intake manifold water ports)
14035-H2300