Revision as of 08:07, 5 April 2016 ddgonzal (Talk | contribs) (->Hand Brake Switch) <- Previous diff |
Current revision ddgonzal (Talk | contribs) (->Hand Brake Switch) |
||
Line 1: | Line 1: | ||
- | Brake lamp located in the dash cluster gauge lights up if there is a problem. | + | Dash [[Brakes|Brake]] lamp lights up if there is a problem or if the parking brake is on. |
- | [http://datsun1200.com/modules/myalbum/photo.php?lid=4346 http://datsun1200.com/uploads/thumbs/4346.jpg] | + | {{AlbumH|21620|jpg|303}} {{Photo!|26134.jpg}} |
= Brake Stop Lights = | = Brake Stop Lights = | ||
- | See: [[Lamp_Wiring#Brake_lights|brake stop lamp wiring]] | + | See: [[Lamp_Wiring#Brake_lights|brake stop lamp wiring]] |
= Hand Brake Switch = | = Hand Brake Switch = | ||
Lamp switch for [[Hand Brake]] pull-handle was fitted to USA 1200s, Japan Sunny Truck staring 7510, and is fitted to newer Australia utes. | Lamp switch for [[Hand Brake]] pull-handle was fitted to USA 1200s, Japan Sunny Truck staring 7510, and is fitted to newer Australia utes. | ||
- | <img size=400>http://datsun1200.com/uploads/photos/25759.jpg</img> [http://datsun1200.com/modules/myalbum/photo.php?lid=25759 album] | + | {{Album|25759}} |
The switch turns on the warning lamp | The switch turns on the warning lamp | ||
- | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=17020 http://datsun1200.com/uploads/photos/17020.jpg] | + | {{Main|Hand Brake#Warning Light}} |
- | Parking Brake Lever | + | Switch |
- | <br><img size=400>http://s297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/owners_manual/1972/13.jpg</img> [http://s297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/owners_manual/1972/13.jpg full] | + | <br>{{Album|17020}} |
- | [[Handbrake#Dash-top_Indicator_Lamp|Dash-top Lamp]] (AUSTRALIA) | + | UTE: switch wire goes up back wall |
- | <br><img size=400>http://datsun1200.com/uploads/photos/26134.jpg</img> | + | <br>{{Album|26409}} |
- | [[Cluster Gauge]] Lamp (USA/late JAPAN) | + | = Brake Fluid Level Warning = |
- | <br><img size=400>http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/wiki/Round_gauge_comparo.jpg</img> | + | Starting around 1976, [[Brake Master Cylinder]] caps were fitted with floats and electrical switches to warn of low brake fluid level. |
- | [[Dashboard#Standard_Dash|Dash Lamp]] (early JAPAN) | + | {{Album|26477}} |
- | <br><img size=400>http://i297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/Parts/1977_B120_dash-2.jpg</img> | + | |
= Pressure Loss Switch = | = Pressure Loss Switch = | ||
- | A [[brakes|brake]] check switch is used on some 1200s to signal if there is a problem with the brake pressure. | + | A '''brake check''' switch is used on North American 1200s to signal if there is a problem with the brake pressure. |
- | http://datsun1200.com/uploads/thumbs/7663.jpg | + | {{SeeMainArticle|Warning_Light_Switch|7663|aname=#Wiring}} |
- | + | ||
- | [http://s297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/owners_manual/1972/11.jpg http://s297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/owners_manual/1972/th_11.jpg] | + | |
- | + | ||
- | See [[Warning Light Switch#Wiring]] | + | |
= Schematic = | = Schematic = | ||
- | [http://datsun1200.com/modules/myalbum/photo.php?lid=21611 http://datsun1200.com/uploads/photos/thumbs/21611.jpg] | + | The BRAKE dash lamp is always connect to 12V when IGN switch is on. It only lights up when a switch grounds the bulb. A switch is fitted to the hand brake lever. When you pull the lever, it grounds the circuit. |
- | + | ||
- | The dash lamps are always connect to 12V when IGN switch is on. They only light up when a switch grounds the bulb. A switch is fitted to the hand brake lever. When you pull the lever, it grounds the circuit. | + | |
* G: Green wire from IGN fuse to dash cluster lamps | * G: Green wire from IGN fuse to dash cluster lamps | ||
Line 44: | Line 37: | ||
* Y/G: Yellow wire w/Green stripe, from switch to bulb, grounds the bulb | * Y/G: Yellow wire w/Green stripe, from switch to bulb, grounds the bulb | ||
- | [http://datsun1200.com/modules/myalbum/photo.php?lid=21612 http://datsun1200.com/uploads/photos/21612.jpg] | + | {{Album-|21612}} |
+ | |||
+ | (Most 1200s don't have the Check/Service [[Warning Light Switch]]) | ||
+ | |||
+ | {{Album-|21611}} | ||
- | [[Category:Wiring]] | + | [[Category:Wiring]]{{End}} |
Current revision
Dash Brake lamp lights up if there is a problem or if the parking brake is on.
Contents |
Brake Stop Lights
See: brake stop lamp wiring
Hand Brake Switch
Lamp switch for Hand Brake pull-handle was fitted to USA 1200s, Japan Sunny Truck staring 7510, and is fitted to newer Australia utes.
The switch turns on the warning lamp
UTE: switch wire goes up back wall
Brake Fluid Level Warning
Starting around 1976, Brake Master Cylinder caps were fitted with floats and electrical switches to warn of low brake fluid level.
Pressure Loss Switch
A brake check switch is used on North American 1200s to signal if there is a problem with the brake pressure.
Schematic
The BRAKE dash lamp is always connect to 12V when IGN switch is on. It only lights up when a switch grounds the bulb. A switch is fitted to the hand brake lever. When you pull the lever, it grounds the circuit.
- G: Green wire from IGN fuse to dash cluster lamps
- B: Black wire to main body earth bolt in engine compartment
- Y/G: Yellow wire w/Green stripe, from switch to bulb, grounds the bulb
(Most 1200s don't have the Check/Service Warning Light Switch)