![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 07:01, 17 June 2009 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 07:27, 17 June 2009 ddgonzal (Talk | contribs) Next diff -> |
||
| Line 5: | Line 5: | ||
| = B210= | = B210= | ||
| - | The GFU was a B210 Coupe fitted with A14 engine and 63a Five-speed transmission. It was available from 1976-1/2. 65 HP A14 with round ports. | + | The FU model was a B210 Coupe fitted with A14 engine and 63a Five-speed transmission. The 5-speed was introduced to USA models from 1976-1/2, and to Canada models for 1977. 65 HP A14 with round ports. |
| + | |||
| + | 5-speed models were only available in Coupe body style. All 5-speed models were fitted with FU engine. So for America, 5-speed was for fuel-economy, not performance option. | ||
| http://datsun1200.com/modules/myalbum/photos/thumbs/16470.jpg | http://datsun1200.com/modules/myalbum/photos/thumbs/16470.jpg | ||
| Line 12: | Line 14: | ||
| * KHLB210FU: FEDERAL 5-speed | * KHLB210FU: FEDERAL 5-speed | ||
| * KHLB210FUV: CALIFORNIA 5-speed | * KHLB210FUV: CALIFORNIA 5-speed | ||
| - | * KHLB210FUN: CANADA 5-speed | + | * KHLB210FUN: CANADA 5-speed [1978] |
| = B310 = | = B310 = | ||
| Line 36: | Line 38: | ||
| = 1976-1978= | = 1976-1978= | ||
| - | B210 engine was A14. Standard A14 was 80 HP, but FU engine was 65 HP. Round ports contributed to superior low-rpm operation. | + | B210 engine was A14. Standard A14 was 80 HP, but FU engine was 65 HP. Round ports contributed to superior low-rpm operation. |
| + | |||
| + | * Round ports, low with swirl (non-shrouded) | ||
| + | * Closed chamber (previously open chamber) | ||
| + | * Passive air induction (non-FU has air pump) | ||
| + | * 1977 compression ratio: 8.5 (5.37 mm dish) | ||
| + | * 1978 USA compression ratio: 9.0 (4.08 mm dish) | ||
| + | |||
| + | NOTE: All 1978 Canada models used this engine, even non-FU Canada cars. | ||
| + | |||
| + | |||
| + | * 1977 FU engine used 1978-style electronic ignition | ||
Revision as of 07:27, 17 June 2009
The FU engine came on the "GFU", "FU" and "MPG" cars (USA-market B210 and B310 fuel economy champion models). F means Five-speed. G means GX trim (not dual carb). U means USA (FEDERAL, except California). They got up to 50 mpg (21 km/liter).
1977 B-210 50 MPG (US gallon = 3.78 liter)
Contents |
B210
The FU model was a B210 Coupe fitted with A14 engine and 63a Five-speed transmission. The 5-speed was introduced to USA models from 1976-1/2, and to Canada models for 1977. 65 HP A14 with round ports.
5-speed models were only available in Coupe body style. All 5-speed models were fitted with FU engine. So for America, 5-speed was for fuel-economy, not performance option.
1977 B-210 Plus
- KHLB210FU: FEDERAL 5-speed
- KHLB210FUV: CALIFORNIA 5-speed
- KHLB210FUN: CANADA 5-speed [1978]
B310
A14 or A15 with 60-series five speed transmission. Available in all body styles: 2-dr, 4-dr, Coupe and Wagon.
- 0278-0780 HLB310FU 4-dr sedan, DX, A14
- 0278-0780 HLB310RFU 2-dr sedan, DX, A14
- 0278-1179 KHLB310FU Coupe, DX, A14
- 0278-1179 WHL310FU Wagon, DX, A14
- 1279-0780 PLB310RSFU 2-dr sedan, Standard, A15
- 1279-0780 KHLB310FU Coupe, DX, A15
- 1279-0780 WPLB310FU Wagon, DX, A15
- 0880- PLB310FU 4-dr, DX, A15
- 0880- PLB310RFU 2-dr, DX, A15
- 0880- HLB310RSFU 2-dr, STD, A14
- 0880- KHLB310FU Coupe, DX, A14
- 0880- WHLB310FU Wagon, DX, A14
65HP - Economy A14 Engine. This engine got 47 MPG in the B310 with 5-speed transmission.
1976-1978
B210 engine was A14. Standard A14 was 80 HP, but FU engine was 65 HP. Round ports contributed to superior low-rpm operation.
- Round ports, low with swirl (non-shrouded)
- Closed chamber (previously open chamber)
- Passive air induction (non-FU has air pump)
- 1977 compression ratio: 8.5 (5.37 mm dish)
- 1978 USA compression ratio: 9.0 (4.08 mm dish)
NOTE: All 1978 Canada models used this engine, even non-FU Canada cars.
- 1977 FU engine used 1978-style electronic ignition
1979-1980
Cylinder head features:
- quench wedge chambers
- round 28mm (?) lowered ports
- Has round intake ports (like the A12 head). It has two small coolant holes below the intake ports, to provide heat for the intake manifold.
- Unique Thermostat housing
1981-1982
All 1981-1982 US models, including A12A, A14 and A15 used the same head design. Even non-FU models.
- quench head
- smaller dish in piston
- 35 mm intake valve (previously 37 mm)
- shrouded intake valves
- change from round ports to Small Oval
- Standard Datsun 1200 style cooling fan (not the larger typical A14 style)