Overview

Datsun 1200 utes came H165 rear axle assembly. However there are several differences from the Sedan & Coupe. However the B110 powered by L14 engine (PB110) also came with H165 which is a direct bolt-in for Sedans & Coupes. Datsun Competition made these PB110 parts available.

The 1200, B210 and 210 models came with either the H145A (to 8/74) or H150 (from 9/74) 3rd members. For competition it is suggested that the H165 3rd member be fitted. To adapt the H165 3rd member the entire axle housing must be changed. For a complete listing of H165 R&P set and LSD units, please refer to page 29.

[edit]

Parts List

43010-H2551 1200 AXLE HOUSING (COUPE ONLY)
* [H25 is PB110 part]
38162-G1000 AXLE ASSY FOR 43010-H2551
* [G10 is newer B120 part]

43010-G1051 B210 AXLE HOUSING (COUPE ONLY)
38162-G1000 AXLE ASSY FOR 43010-G1051

43010-W6250 B310 AXLE HOUSING
* same as A10 wagon housing
38162-W8500 AXLE ASSY FOR 43010-W6250

The following parts are required to complete the conversion:
* 43036-H5000 AXLE SHIM (0.75.MM)
* 43036-H5001 AXLE SHIM (0.15MM)
* 43036-H5002 AXLE SHIM (0.225MM)
* 43036-H5003 AXLE SHIM (0.3MM)
* 43070-01L00 AXLE BEARING SPACER (2)
* 43215-H5000 AXLE BEARING (2)
* 43252-H1010 OIL SEAL (2)
* 43255-H1000 BEARING COLLAR (2)
1200/B210 only
 * 43236-H5000 GREASE CATCHER (1200/B210 only) (2)
 * 43239-H5000 PACKING 1200/B210 only (2)

Retrieved from "http://datsun1200.com/modules/mediawiki/index.php?title=H165_Conversion_Listing"

This page has been accessed 8,520 times. This page was last modified 02:19, 31 January 2017. Content is available under Datsun 1200 Club.

H165 Conversion Listing

Overview

Parts List