Revision as of 06:46, 4 July 2012 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 07:29, 4 July 2012 ddgonzal (Talk | contribs) (->Components) Next diff -> |
||
Line 16: | Line 16: | ||
= Components = | = Components = | ||
[[Transverse Link]] (LCA) H74/H85/W58 B120(late)/B210(late)/B310(ALL) | [[Transverse Link]] (LCA) H74/H85/W58 B120(late)/B210(late)/B310(ALL) | ||
- | * can replace H10 LCA but requires H74 ball joint | + | * can replace H10 LCA but requires supporting parts |
- | [[Tension Rod]] H74 | + | |
- | * different bolt spacing than H10 | + | H74 Transverse Link Support |
- | [[Ball Joint]] H74 | + | [[Tension Rod]] H74 |
- | * wider bolt spacing than H10 | + | * different bolt spacing than H10 |
- | * for B310, used with A12 only | + | [[Ball Joint]] H74 |
- | [[Steering Arm]] H74 | + | * wider bolt spacing than H10 |
- | Tie-rod ends | + | * for B310, used with A12 only |
+ | [[Steering Arm]] H74 for 45 mm struts | ||
+ | * uses tie-rod ends with | ||
+ | 01227-00011 NUT [same as B110] | ||
+ | 08921-32010 COTTER PIN [same as B110] | ||
+ | |||
+ | |||
+ | Also see: [[Strut-Accepting Package]] |
Revision as of 07:29, 4 July 2012
H74 is the Applied Model Code for the late A12-powered Datsun B210. H74 suspension was used by the B120 Datsun 1200 truck/pickup/ute. It uses 45mm struts like the B110.
Overview
H74 front suspension was used by these models:
B120 from October 1975 VB210 from October 1975 B210 from December 1975 B310 (some)
H10 = B110 parts * earlier B120 used H10 components * earlier B210 used H50 components, same as or close to H10
Components
Transverse Link (LCA) H74/H85/W58 B120(late)/B210(late)/B310(ALL) * can replace H10 LCA but requires supporting parts
H74 Transverse Link Support Tension Rod H74 * different bolt spacing than H10 Ball Joint H74 * wider bolt spacing than H10 * for B310, used with A12 only Steering Arm H74 for 45 mm struts * uses tie-rod ends with 01227-00011 NUT [same as B110] 08921-32010 COTTER PIN [same as B110]
Also see: Strut-Accepting Package