Revision as of 22:02, 4 July 2012 ddgonzal (Talk | contribs) (->Components) <- Previous diff |
Revision as of 01:39, 15 March 2013 ddgonzal (Talk | contribs) (->Overview) Next diff -> |
||
Line 8: | Line 8: | ||
VB210 from October 1975 | VB210 from October 1975 | ||
B210 from December 1975 | B210 from December 1975 | ||
- | B310 (some) | + | B310 A12-powered models (not A12A) |
H10 = B110 parts | H10 = B110 parts |
Revision as of 01:39, 15 March 2013
H74 is the Applied Model Code for the late A12-powered Datsun B210. H74 suspension was used by the B120 Datsun 1200 truck/pickup/ute. It uses 45mm struts like the B110.
Overview
H74 front suspension was used by these models:
B120 from October 1975 VB210 from October 1975 B210 from December 1975 B310 A12-powered models (not A12A)
H10 = B110 parts * earlier B120 used H10 components * earlier B210 used H50 components, same as or close to H10
Components
Transverse Link (LCA) H74/H85/W58 B120(late)/B210(late)/B310(ALL) * can replace H10 LCA but requires supporting parts
H74 Transverse Link Support Tension Rod H74 * different bolt spacing than H10 Ball Joint H74 * wider bolt spacing than H10 * for B310, used with A12 only * uses 08921-32010 PIN, COTTER [same as B110] Steering Arm H74 for 45 mm struts * uses tie-rod ends SAME SIZE AS B110/120Y/B120 01227-00011 NUT [same as B110] 08921-32010 COTTER PIN [same as B110]
Also see: Strut-Accepting Package