![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 06:37, 4 July 2012 ddgonzal (Talk | contribs) <- Previous diff |
Current revision ddgonzal (Talk | contribs) |
||
| Line 1: | Line 1: | ||
| - | [[Category:Front Axle And Front Suspension]][[Category:General Information]] | ||
| [[H74]] is the [[Applied Model Code]] for the late A12-powered Datsun [[B210]]. H74 suspension was used by the [[B120]] Datsun 1200 truck/pickup/ute. It uses 45mm struts like the B110. | [[H74]] is the [[Applied Model Code]] for the late A12-powered Datsun [[B210]]. H74 suspension was used by the [[B120]] Datsun 1200 truck/pickup/ute. It uses 45mm struts like the B110. | ||
| + | |||
| + | = Overview = | ||
| + | H74 front suspension was used by these models: | ||
| B120 from October 1975 | B120 from October 1975 | ||
| VB210 from October 1975 | VB210 from October 1975 | ||
| B210 from December 1975 | B210 from December 1975 | ||
| - | B310 (some) | + | B310 A12-powered models (not A12A) |
| + | |||
| + | H10 = B110 parts | ||
| + | * earlier B120 used H10 components | ||
| + | * earlier B210 used H50 components, same as or close to H10 | ||
| + | |||
| + | = Components = | ||
| + | [[Transverse Link]] (LCA) H74/H85/W58 B120(late)/B210(late)/B310(ALL) | ||
| + | * can replace H10 LCA but requires supporting parts | ||
| + | |||
| + | H74 Transverse Link Support | ||
| + | [[Tension Rod]] H74 | ||
| + | * different bolt spacing than H10 | ||
| + | [[Ball Joint Comparison|Ball Joint]] H74 | ||
| + | * wider bolt spacing than H10 | ||
| + | * for B310, used with A12 only | ||
| + | * uses 08921-32010 PIN, COTTER [same as B110] | ||
| + | [[Steering Arm]] H74 for 45 mm struts | ||
| + | * uses tie-rod ends SAME SIZE AS B110/120Y/B120 | ||
| + | 01227-00011 NUT [same as B110] | ||
| + | 08921-32010 COTTER PIN [same as B110] | ||
| + | |||
| + | Also see: [[Strut-Accepting Package]] | ||
| - | [[Transverse Link]] (LCA) H74/H85/W58 B120(late)/B210(late)/B310(A12) | + | [[Category:Front Axle And Front Suspension]]{{End}} |
| - | [[Tension Rod]] H74 | + | |
| - | [[Ball Joint]] H74 | + | |
| - | [[Steering Arm]] H74 | + | |
| - | Tie-rod ends | + | |
Current revision
H74 is the Applied Model Code for the late A12-powered Datsun B210. H74 suspension was used by the B120 Datsun 1200 truck/pickup/ute. It uses 45mm struts like the B110.
[edit]
Overview
H74 front suspension was used by these models:
B120 from October 1975 VB210 from October 1975 B210 from December 1975 B310 A12-powered models (not A12A)
H10 = B110 parts * earlier B120 used H10 components * earlier B210 used H50 components, same as or close to H10
[edit]
Components
Transverse Link (LCA) H74/H85/W58 B120(late)/B210(late)/B310(ALL) * can replace H10 LCA but requires supporting parts
H74 Transverse Link Support Tension Rod H74 * different bolt spacing than H10 Ball Joint H74 * wider bolt spacing than H10 * for B310, used with A12 only * uses 08921-32010 PIN, COTTER [same as B110] Steering Arm H74 for 45 mm struts * uses tie-rod ends SAME SIZE AS B110/120Y/B120 01227-00011 NUT [same as B110] 08921-32010 COTTER PIN [same as B110]
Also see: Strut-Accepting Package
¤