Remote Clutch Master Cylinder

Revision as of 11:30, 22 February 2016; view current revision
<-Older revision | Newer revision->

A remote-mounted Hydraulic clutch Master cylinder may also be needed if there is not enough room in the engine compartment.

Overview

Mount the clutch master under the dash, and connect it to the gearbox slave cylinder via a hydraulic line.

1. Fabricate L-shaped bracket, bolt (or weld) to the under-dash steering column brace
2. Lengthen clutch pedal, attach the master rod ABOVE the fulcrum
3. Place the filler tube under the dash, connect to master via rubber hose

Girling

Under-dash mounted Girling clay pipe master
album

Girling "claypipe" master cylinder, available in 5/8" and 3/4" bores (about $70 AUD). Threads are 3/8 unc for pipe outlet and 7/16 unc for fluid in

Urvan

https://en.wikipedia.org/wiki/Nissan_Caravan

• Use with Nissan Urvan remote-fill tops
• A simple 90-degree bracket is fabricated to mount it to the under-dash steering column brace

album

Sentra

https://en.wikipedia.org/wiki/Nissan_Sentra

Nissan Sentra Clutch Master Cylinder
album

Fluid reservoir is connected to the cylinder via a rubber hose.
album

album

Lancer

https://en.wikipedia.org/wiki/Mitsubishi_Lancer_(A70)

For ideas, could something like this be used on a 1200?

Cable-to-Hydraulic custom remote clutch m/c found on Mitsubishi LA Lancer
album