Remote Clutch Master Cylinder

Revision as of 23:05, 13 January 2017; view current revision
<-Older revision | Newer revision->

A remote-mounted Hydraulic clutch Master cylinder may also be needed if there is not enough room in the engine compartment.

Overview

Mount the clutch master inside the passenger compartment -- under the dash -- and connect it to the gearbox slave cylinder via a hydraulic line.

1. Fabricate L-shaped bracket, bolt (or weld) to the under-dash steering column brace
2. Lengthen clutch pedal, attach the master rod ABOVE the fulcrum
3. Place the filler tube under the dash, connect to master via rubber hose

steering column brace
Album 24294

Not enough room after a big Engine Swap? Move the clutch master under the dash!
Album 18813 Album 18812

PIGDOG

Album 18890 Album 18891 Album 18893 Album 19198 Album 19199 Album 19200

Extended pedal
Album 18892

Old setup - 2nd pedal box
Album 18894 Album 18895 Album 18896

Girling

Under-dash mounted Girling clay pipe master
Album 4859

Girling "claypipe" master cylinder, available in 5/8" and 3/4" bores (about $70 AUD). Threads are 3/8 unc for pipe outlet and 7/16 unc for fluid in

Urvan

http://en.wikipedia.org/wiki/Nissan_Caravan

• Use with Nissan Urvan remote-fill tops
• A simple 90-degree bracket is fabricated to mount it to the under-dash steering column brace

Album 1851

Sentra

http://en.wikipedia.org/wiki/Nissan_Sentra (Nissan Sunny FWD)

Nissan Sentra Clutch Master Cylinder
Album 9524 Album 9668

Fluid reservoir is connected to the cylinder via a rubber hose.
Album 9526

Similar to Sentra B15U clutch master 30610-5M007 (top outlet)

Lancer

http://en.wikipedia.org/wiki/Mitsubishi_Lancer_(A70)

For ideas, could something like this be used on a 1200?

Cable-to-Hydraulic custom remote clutch m/c found on Mitsubishi LA Lancer
Album 7656