![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 02:42, 6 June 2012 ddgonzal (Talk | contribs) <- Previous diff |
Current revision ddgonzal (Talk | contribs) (->Sizes) |
||
| Line 1: | Line 1: | ||
| - | Spacers are used when lowering the front of the car. They sit between the steering arm and strut to preserve the original roll steer angle. By correcting the angle of the lower control arm they will restore the original suspension geometry. Sometimes called Strut Spacers or Bump Steer Adjusters, but the purpose is not actually to do either. | + | [[Category:Suspension Modifications]] |
| + | Spacers are used when lowering the front of the car. They sit between the [[Knuckle Arm]] and [[Strut]] to preserve the original roll steer angle. By correcting the angle of the lower control arm they will restore the original suspension geometry. Sometimes called Strut Spacers or Bump Steer Adjusters, but the purpose is not actually to do either. | ||
| = Overview = | = Overview = | ||
| When the car is lowered significantly over standard, the suspension arms are closer to parallel with the ground and the tie rods are inclined up instead of down. Additionally, the steering linkage is no longer optimal. | When the car is lowered significantly over standard, the suspension arms are closer to parallel with the ground and the tie rods are inclined up instead of down. Additionally, the steering linkage is no longer optimal. | ||
| - | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=24548 http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/uploads/photos/24548.jpg] | + | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=24548 click] |
| + | <br><img size=400>http://datsun1200.com/uploads/photos/24548.jpg</img> | ||
| Roll Centre Adjusters space the steering arms and LCA to their original position. | Roll Centre Adjusters space the steering arms and LCA to their original position. | ||
| - | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=24550 http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/uploads/photos/24550.jpg] | + | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=24550 click] |
| + | <br><img size=400>http://datsun1200.com/uploads/photos/24550.jpg</img> | ||
| - | [http://datsun1200.com/uploads/newbb/9374_4e940b47863a8.jpg http://ddgonzal.members.winisp.net/getThumb.aspx?width=400&uri=http://datsun1200.com/uploads/newbb/9374_4e940b47863a8.jpg] | + | [http://datsun1200.com/uploads/newbb/9374_4e940b47863a8.jpg http://datsun1200.com/uploads/newbb/9374_4e940b47863a8.jpg] |
| [http://datsun1200.com/modules/myalbum/photo.php?lid=23732 http://datsun1200.com/uploads/thumbs/23732.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=23728 http://datsun1200.com/uploads/thumbs/23728.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=23731 http://datsun1200.com/uploads/thumbs/23731.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=16436 http://datsun1200.com/uploads/thumbs/16436.jpg] | [http://datsun1200.com/modules/myalbum/photo.php?lid=23732 http://datsun1200.com/uploads/thumbs/23732.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=23728 http://datsun1200.com/uploads/thumbs/23728.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=23731 http://datsun1200.com/uploads/thumbs/23731.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=16436 http://datsun1200.com/uploads/thumbs/16436.jpg] | ||
| Line 14: | Line 17: | ||
| = Sizes = | = Sizes = | ||
| Datsun 1200 and A12-powered B210 uses 75mm spacing for the bolts that attach the [[Steering Arm]] to the strut. Other Datsuns use 80mm spacing. | Datsun 1200 and A12-powered B210 uses 75mm spacing for the bolts that attach the [[Steering Arm]] to the strut. Other Datsuns use 80mm spacing. | ||
| - | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=19109 http://datsun1200.com/uploads/thumbs/19109.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=23761 http://datsun1200.com/uploads/thumbs/23761.jpg] | + | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=19109 http://datsun1200.com/uploads/thumbs/19109.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=23761 http://datsun1200.com/uploads/thumbs/23761.jpg] |
| + | |||
| + | Datsuns with 2" struts use 80 mm spacing. These [[Nismo]] spacers are 510/610/710 with 80 mm spacing and 40(?) mm locating ring. | ||
| + | |||
| + | 80mm bolting Nissan Part Number 99996-10SPCR | ||
| + | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=26235 http://datsun1200.com/uploads/thumbs/26235.jpg] | ||
| + | |||
| + | R31/S12/910 spacers are 80mm but use a large 54 mm locating ring. | ||
| These offset kind will also widen your track by moving the strut outward (you could alternatively reverse them to move the strut inward): | These offset kind will also widen your track by moving the strut outward (you could alternatively reverse them to move the strut inward): | ||
| Line 21: | Line 31: | ||
| = Discussions = | = Discussions = | ||
| [http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=54383 Will these fit?] | [http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=54383 Will these fit?] | ||
| - | <br>[http://datsun1200.com/uploads/newbb/174_4ef555e601512.jpg http://ddgonzal.members.winisp.net/getThumb.aspx?width=140&uri=http://datsun1200.com/uploads/newbb/174_4ef555e601512.jpg] [http://datsun1200.com/uploads/newbb/174_4ef555ed65485.jpg http://ddgonzal.members.winisp.net/getThumb.aspx?width=140&uri=http://datsun1200.com/uploads/newbb/174_4ef555ed65485.jpg] [http://datsun1200.com/uploads/newbb/174_4ef555f377cf8.jpg http://ddgonzal.members.winisp.net/getThumb.aspx?width=140&uri=http://datsun1200.com/uploads/newbb/174_4ef555f377cf8.jpg] | + | <br>[http://datsun1200.com/uploads/newbb/174_4ef555e601512.jpg http://datsun1200.com/uploads/newbb/174_4ef555e601512.jpg] [http://datsun1200.com/uploads/newbb/174_4ef555ed65485.jpg http://datsun1200.com/uploads/newbb/174_4ef555ed65485.jpg] [http://datsun1200.com/uploads/newbb/174_4ef555f377cf8.jpg http://datsun1200.com/uploads/newbb/174_4ef555f377cf8.jpg] |
| + | |||
| + | [http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=53226 http://datsun1200.com/uploads/newbb/9374_4e93311809293.jpg] | ||
| - | [http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=53226 http://ddgonzal.members.winisp.net/getThumb.aspx?width=140&uri=http://datsun1200.com/uploads/newbb/9374_4e93311809293.jpg] | + | ロールセンターアダプタ |
Current revision
Spacers are used when lowering the front of the car. They sit between the Knuckle Arm and Strut to preserve the original roll steer angle. By correcting the angle of the lower control arm they will restore the original suspension geometry. Sometimes called Strut Spacers or Bump Steer Adjusters, but the purpose is not actually to do either.
[edit]
Overview
When the car is lowered significantly over standard, the suspension arms are closer to parallel with the ground and the tie rods are inclined up instead of down. Additionally, the steering linkage is no longer optimal.
click
Roll Centre Adjusters space the steering arms and LCA to their original position.
click
[edit]
Sizes
Datsun 1200 and A12-powered B210 uses 75mm spacing for the bolts that attach the Steering Arm to the strut. Other Datsuns use 80mm spacing.
Datsuns with 2" struts use 80 mm spacing. These Nismo spacers are 510/610/710 with 80 mm spacing and 40(?) mm locating ring.
80mm bolting Nissan Part Number 99996-10SPCR
R31/S12/910 spacers are 80mm but use a large 54 mm locating ring.
These offset kind will also widen your track by moving the strut outward (you could alternatively reverse them to move the strut inward):
[edit]
Discussions
ロールセンターアダプタ