User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Roll Center Adjusters

Revision as of 03:28, 12 July 2015; view current revision
<-Older revision | Newer revision->

Datsun 1200 encyclopedia | Recent changes | Edit this page | Page history | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision
Category: Suspension Modifications

Spacers are used when lowering the front of the car. They sit between the Knuckle Arm and Strut to preserve the original roll steer angle. By correcting the angle of the lower control arm they will restore the original suspension geometry. Sometimes called Strut Spacers or Bump Steer Adjusters, but the purpose is not actually to do either.

Overview

When the car is lowered significantly over standard, the suspension arms are closer to parallel with the ground and the tie rods are inclined up instead of down. Additionally, the steering linkage is no longer optimal.
click

Roll Centre Adjusters space the steering arms and LCA to their original position.
click

9374_4e940b47863a8.jpg

23732.jpg 23728.jpg 23731.jpg 16436.jpg

Sizes

Datsun 1200 and A12-powered B210 uses 75mm spacing for the bolts that attach the Steering Arm to the strut. Other Datsuns use 80mm spacing.
19109.jpg 23761.jpg

These offset kind will also widen your track by moving the strut outward (you could alternatively reverse them to move the strut inward):
16496.jpg

Discussions

Will these fit?
174_4ef555e601512.jpg 174_4ef555ed65485.jpg 174_4ef555f377cf8.jpg

9374_4e93311809293.jpg

ロールセンターアダプタ