![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 02:50, 13 August 2011 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 03:11, 13 August 2011 ddgonzal (Talk | contribs) (->Part Numbers) Next diff -> |
||
| Line 58: | Line 58: | ||
| = Part Numbers = | = Part Numbers = | ||
| NOTE: All parts are identical for 1971-1973 models (including sedan, coupe, wagon and truck). | NOTE: All parts are identical for 1971-1973 models (including sedan, coupe, wagon and truck). | ||
| + | * 54110-H1060 Transverse link ass'y R.H (formerly H1000) | ||
| + | * 54111-H1060 Transverse link ass'y L.H (formerly H1000) | ||
| + | * 54131-H1000 tranverse link bushing $10.83 USD | ||
| + | Thse parts also fits 1974-1975 B210 w/A12 engine. | ||
| - | Asterix: Part fits 1974-1975 B210 w/A12 engine. Perhaps identical to earlier B110 unit. | ||
| - | * 54110-H1060* Transverse link ass'y R.H (formerly H1000) | + | Early LCA uses this ball joint: |
| - | * 54111-H1060* Transverse link ass'y L.H (formerly H1000) | + | 40160-H1000 BALL JOINT ASS'Y-lower |
| - | * 54131-H1000* tranverse link bushing $10.83 USD | + | fastening ball joint to knuckle arm |
| + | 08911-44210 NUT | ||
| + | fastening ball joint to LCA | ||
| + | 40178-H1000 BOLT "A" (2) | ||
| + | 40179-H1000 BOLT "B" (6) | ||
| + | 08911-60810 NUT (6) | ||
| + | 08915-13810 WASHER-lock (8) | ||
| + | |||
| 1974-up [[B120]] Truck | 1974-up [[B120]] Truck | ||
| + | 54100-H7400* ARM ASSY-LOWER RH 7510-7711 | ||
| + | 54100-H8500* ARM ASSY-LOWER RH 7712-8503 | ||
| + | 54110-W5851 ARM ASSY-LOWER RH 8504- | ||
| + | |||
| + | 54101-H7400* ARM ASSY-LOWER LH 7510-7711 | ||
| + | 54101-H8500* ARM ASSY-LOWER RH 7712-8503 | ||
| + | 54111-W5851 ARM ASSY-LOWER RH 8504- | ||
| + | 54131-H1000 BUSHING ASSY-LOWER ARM (Same as B110) | ||
| Asterix: Fits 1976-1978 B210 | Asterix: Fits 1976-1978 B210 | ||
| - | * 54110-H7400* Transverse link ass'y R.H -7711 | + | Late LCA uses this ball joint: |
| - | * 54110-H8500* Transverse link ass'y R.H 7712-8503 | + | |
| - | * 54110-W5851 Transverse link ass'y R.H 8504- | + | |
| - | * 54131-H1000 tranverse link bushing (Same as B110) | + | |
| = Photo Index = | = Photo Index = | ||
Revision as of 03:11, 13 August 2011
Sometimes called a "lower control arm" (LCA), the transverse link is the lower suspension member. The Tension Rod (castor rod) bolts to it, as do the Ball Joints. The inner end of the LCA bolts to the front Crossmember.
Also see Front_Suspension
Contents |
Overview
The inner end of the LCA bolts to the front Crossmember:
B310 and B110 LCA are virtually identical
With B310 Ball Joints, the B310 Knuckle Arm fits, which will bolt to most Datsun-Nissan struts such as Stanza, 280ZX, etc.
Bushings: Stock vs Poly comparo
Racing
Racing heim joints on LCA
Custom LCA
Upgrading
Late 1200 vs Early 1200
Later utes
B310/A10
B310 (Sunny/210) LCA and A10 (Violet/Stanza) LCA are the same.
Stanza struts increase the track ~32mm -- too far to be registered in ACT.
per side +8mm strut/hub offset +8mm ball joint offset
Some say it increases track ~50 mm.
As for the lower arms, they are indeed the same length. With the exception of the diameter of the bolts which hold the ball joint to them ...they are the same. However the [B]310 arms are made of a slightly heavier construction, so it would be a toss up between strength verses weight, when chosing which arms to use.Utes ... use the bigger bolts like the [B]310's.
A14force
Backfire said the ball joint bolt pattern is smaller in B110 vs B310.
late ute ball joints (left) to stanza ball joints
Both fit late 1200 or Stanza/B310 LCAs. Depending on how much track you want.
The Stanza/B310 ball joint uses a larger diameter taper than B110.
Part Numbers
NOTE: All parts are identical for 1971-1973 models (including sedan, coupe, wagon and truck).
- 54110-H1060 Transverse link ass'y R.H (formerly H1000)
- 54111-H1060 Transverse link ass'y L.H (formerly H1000)
- 54131-H1000 tranverse link bushing $10.83 USD
Thse parts also fits 1974-1975 B210 w/A12 engine.
Early LCA uses this ball joint:
40160-H1000 BALL JOINT ASS'Y-lower fastening ball joint to knuckle arm 08911-44210 NUT fastening ball joint to LCA 40178-H1000 BOLT "A" (2) 40179-H1000 BOLT "B" (6) 08911-60810 NUT (6) 08915-13810 WASHER-lock (8)
1974-up B120 Truck
54100-H7400* ARM ASSY-LOWER RH 7510-7711 54100-H8500* ARM ASSY-LOWER RH 7712-8503 54110-W5851 ARM ASSY-LOWER RH 8504-
54101-H7400* ARM ASSY-LOWER LH 7510-7711 54101-H8500* ARM ASSY-LOWER RH 7712-8503 54111-W5851 ARM ASSY-LOWER RH 8504-
54131-H1000 BUSHING ASSY-LOWER ARM (Same as B110)
Asterix: Fits 1976-1978 B210
Late LCA uses this ball joint:
Photo Index
B10
Datsun 910 & R31 LCAs
