Trunk

Revision as of 22:47, 30 June 2011; view current revision
<-Older revision | Newer revision->

Datsun 1200 sedans have a regular trunk (boot) at the rear of the car. Coupes, being fastbacks but not hatchbacks, have a teensy weensy trunk lid at the back. The sedan trunk is very roomy for a car this size, and can hold about eight grocery bags, or luggage for five people. The lids are secured with a key lock.

In sedans, the Fuel tank is inside the trunk, next to the rear Seat, hidden behind a finisher panel.

Standard Equipment

The trunk came factory equipped with:

• Scissor Jack
• S-shaped Jack Handle
• Wheel Wrench in black Bag

For more details, see: Jack

• Spare Tire

Sedan Finishing Panels

The trunk finishing panels are made out of pressboard:

Coupe

Coupe has a small trunk lid.

Fitting

The 1200 coupe has interior plastic covers inside -- lots 'o plastic. There is plastic on the bottom side of the trunk lid too.

Large panel fasteners are fastened by the typical B110 sheet screws (B210 changed to bolts/machine screws).

• 08510-51612 SCREW-TAPPING M5 FIX TRIM (16 per car)

Plastic panel fasteners

• 01553-00291 CLAMP

FRP