![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 01:59, 11 January 2013 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 03:08, 8 May 2014 ddgonzal (Talk | contribs) Next diff -> |
||
| Line 1: | Line 1: | ||
| - | Simple layout. | + | Vacuum hoses on the 1200 follow a simple layout. |
| + | |||
| + | = Overview = | ||
| + | 1. VACUUM ADVANCE | ||
| + | |||
| + | == Vacuum Advance == | ||
| + | Connect a hose from the distributor to the port connection directly above the idle mixture screw. | ||
| + | |||
| + | [http://datsun1200.com/modules/myalbum/photo.php?lid=2216 http://datsun1200.com/uploads/thumbs/2216.jpg] [http://datsun1200.com/modules/myalbum/photo.php?lid=2214 http://datsun1200.com/uploads/thumbs/2214.jpg] | ||
| + | |||
| + | Vacuum advance in all models uses a hose from the 'port' on the carburetor to the Distributor. | ||
| + | |||
| + | The A12 will run good with the vacuum advance disconnected, but will run smoother and get better fuel economy with it working. | ||
| + | |||
| + | For more information, see [[Vacuum Advance]] | ||
| + | |||
| = USA = | = USA = | ||
Revision as of 03:08, 8 May 2014
Vacuum hoses on the 1200 follow a simple layout.
Overview
1. VACUUM ADVANCE
Vacuum Advance
Connect a hose from the distributor to the port connection directly above the idle mixture screw.
Vacuum advance in all models uses a hose from the 'port' on the carburetor to the Distributor.
The A12 will run good with the vacuum advance disconnected, but will run smoother and get better fuel economy with it working.
For more information, see Vacuum Advance
USA
USA models have more emission controls, so a couple extra lines are used.
See:
- Emission Controls#Throttle Opener
- Emission Controls#Temperature Controlled Air Cleaner
- Fume Control (for the Flow Guide Valve details)
- TCVAS