Revision as of 03:08, 8 May 2014 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 03:12, 8 May 2014 ddgonzal (Talk | contribs) (->Overview) Next diff -> |
||
Line 5: | Line 5: | ||
== Vacuum Advance == | == Vacuum Advance == | ||
+ | The A12 will run good with the vacuum advance disconnected, but will run smoother and get better fuel economy with it working. | ||
+ | |||
Connect a hose from the distributor to the port connection directly above the idle mixture screw. | Connect a hose from the distributor to the port connection directly above the idle mixture screw. | ||
Line 10: | Line 12: | ||
Vacuum advance in all models uses a hose from the 'port' on the carburetor to the Distributor. | Vacuum advance in all models uses a hose from the 'port' on the carburetor to the Distributor. | ||
- | |||
- | The A12 will run good with the vacuum advance disconnected, but will run smoother and get better fuel economy with it working. | ||
For more information, see [[Vacuum Advance]] | For more information, see [[Vacuum Advance]] | ||
+ | === Carbon Canister == | ||
+ | For late model 1200s, Tee into this line and connect a hose to the [[Charcoal Canister]] "VC" line. The canister is for the Fuel Tank vent. Since these fuel tanks are sealed, it needs to vent somewhere. | ||
+ | |||
+ | [http://datsun1200.com/modules/myalbum/photo.php?lid=16807 http://datsun1200.com/modules/myalbum/photos/16807.jpg] | ||
+ | |||
+ | just three connections: | ||
+ | 1. Fuel tank vent line (connection by itself) | ||
+ | 2. PURGE - to intake manifold (bottom connector) | ||
+ | 3. Vacuum Control (top connector) - to vacuum advance hose | ||
= USA = | = USA = |
Revision as of 03:12, 8 May 2014
Vacuum hoses on the 1200 follow a simple layout.
Contents |
Overview
1. VACUUM ADVANCE
Vacuum Advance
The A12 will run good with the vacuum advance disconnected, but will run smoother and get better fuel economy with it working.
Connect a hose from the distributor to the port connection directly above the idle mixture screw.
Vacuum advance in all models uses a hose from the 'port' on the carburetor to the Distributor.
For more information, see Vacuum Advance
= Carbon Canister
For late model 1200s, Tee into this line and connect a hose to the Charcoal Canister "VC" line. The canister is for the Fuel Tank vent. Since these fuel tanks are sealed, it needs to vent somewhere.
just three connections: 1. Fuel tank vent line (connection by itself) 2. PURGE - to intake manifold (bottom connector) 3. Vacuum Control (top connector) - to vacuum advance hose
USA
USA models have more emission controls, so a couple extra lines are used.
See:
- Emission Controls#Throttle Opener
- Emission Controls#Temperature Controlled Air Cleaner
- Fume Control (for the Flow Guide Valve details)
- TCVAS