Revision as of 04:36, 7 June 2010 ddgonzal (Talk | contribs) (->G61) <- Previous diff |
Revision as of 04:49, 7 June 2010 ddgonzal (Talk | contribs) (->Round Port) Next diff -> |
||
Line 2: | Line 2: | ||
= Round Port = | = Round Port = | ||
- | == Dry Type == | + | == 180 == |
- | === 180 === | + | |
180 was parts originally designed for Datsun 1000, so thus A10 engines. This manifold gasket was also used by A12 engines for B110 and E10, and B210. | 180 was parts originally designed for Datsun 1000, so thus A10 engines. This manifold gasket was also used by A12 engines for B110 and E10, and B210. | ||
* Dry type | * Dry type | ||
Line 12: | Line 11: | ||
[http://datsun1200.com/modules/myalbum/photo.php?lid=22050 http://datsun1200.com/uploads/thumbs/22050.jpg] | [http://datsun1200.com/modules/myalbum/photo.php?lid=22050 http://datsun1200.com/uploads/thumbs/22050.jpg] | ||
- | === H74 === | + | == H74 == |
Used by newer A12S (1976?) and A14 Van engines. | Used by newer A12S (1976?) and A14 Van engines. | ||
* New type bolt pattern | * New type bolt pattern | ||
Line 21: | Line 20: | ||
[http://datsun1200.com/modules/myalbum/photo.php?lid=22052 http://datsun1200.com/uploads/thumbs/22052.jpg] | [http://datsun1200.com/modules/myalbum/photo.php?lid=22052 http://datsun1200.com/uploads/thumbs/22052.jpg] | ||
- | == Wet Type == | + | == H85 == |
- | === H85 === | + | |
Late model A12, A14 KFU, A15 KFU (see [[FU Engine]]) | Late model A12, A14 KFU, A15 KFU (see [[FU Engine]]) | ||
* Round port | * Round port |
Revision as of 04:49, 7 June 2010
14035 is Nissan Part Numbers type for GASKET-MANIFOLD TO CYLINDER HEAD. Identification includes intake port size, and whether it is a "dry" or "wet" type (if there are any water passages in the gasket).
Contents |
Round Port
180
180 was parts originally designed for Datsun 1000, so thus A10 engines. This manifold gasket was also used by A12 engines for B110 and E10, and B210.
* Dry type * Original style bolt pattern 14035-18000 -7909 14035-18010 [alternate manufacturer] superceeded by 14035-K7700 $12.58 USD
H74
Used by newer A12S (1976?) and A14 Van engines. * New type bolt pattern * Dry type 14035-H7400 7908-8109 superceeded by 14035-H7401 $13.82 14035-H7410 8110-
H85
Late model A12, A14 KFU, A15 KFU (see FU Engine) * Round port * New Type Bolt Pattern * Wet Intake 14035-H8501 B120 -9111, B310 USA 0879-0780 KFU A14/A15 $12.58 USD 14035-H8511 B120 9111- also available aftermarket PN MS15316
Oval Ports
All oval port manifolds use the new-type bolt pattern.
H23
For A12GX Engine and A12T engines * Original bolt pattern * Port size 30x36 mm (Large Oval Port) * Wet type (has intake manifold water ports) 14035-H2300 14035-H2301 Nismo competition gasket: Even-larger ports competition gasket: Also made in non-original bolt pattern:
H62
1974 A13 engine * 28x30 intake port size * Partial-siamese intake ports * Dry type (no water ports on manifold face of head) 14035-H6200 $4.87 USD Or you can use 14035-H7200 instead
H72
For A15 and most A14 engines from introduction 1974 to 1979 * 28x34 mm intake ports (Regular Oval Port) * Dry type (no intake manifold water ports) 14035-H7200 -7906 $12.35 USD 14035-H7210 [alternate supplier]
M24
A14T from late B210 * regular size oval ports * difference from 14035-H7200 unknown 14035-M2401
H89
* Wet type (has intake manifold water ports) 14035-H8901 superseded by 14035-05H01 $25.20 USD
H92
EFI Heads (A14E, A15E) * 28x32 mm intake ports (medium oval) with notch for injector * Wet type (has intake manifold water ports) 14035-H9201
EXマニフォールド INマニフォールド ガスケット