Main Menu

Home News Forum Photo Album Tech Wiki Downloads Web Links Polls FAQ Members Map

Fast Search

Slow Search

Google Ad

Datsun 1200s came with two brake systems: all drums, or front disc with rear drums. They were excellent brakes for the period.

Also see:

Types

Drum front/drum rear - Standard trim, Deluxe trim
Disc front/drum rear - GL, GX and optional on Deluxe

The 1200 front-disc/rear-drum system was good for 1971. In fact, stopping power was better than most 'muscle cars' of the era. However, if you have a drum/drum system, you'll want to upgrade to disc/drum. The drum system stops well enough, but the disc system has less fading going down mountain roads.

Calipers

Calipers are used with disc brakes. Datsun B110, B210 and B310 used floating two-piston ANNET types.

Type

B110: ANNET 12/14A (1.894" cylinder inner diameter)
B310 small: AN-18 (1.894" cylinder inner diameter)
B310 large: Disc-AN20 (2.012" cylinder inner diameter)

Caliper bolt spacing:

~84 mm: B110
- and all 12" wheel B210 and B310
88.9 mm: B310 large struts for 13" wheels

Rotor Sizes

Dia. (mm)	Part Number	Source
212.5	40206-H1006	B110, B210 with A12 1974, 1975
220 (AN18)	40206-H7500	B210 A12 1976-1978,B310 with 12" wheels
232	40206-A1155	B210 A13, PB110?, PB210 early?
245 (AN20)	40206-U6700	A10, B210 A14, B310 A14/A15, PB210 late?
?	?	B210 Australia-assembled
? (Girlock)	?	A10, Australia-assembled

Apparently the calipers are unique for each rotor, also the strut/spindle assembly *may* be different.

Rear Drum Brakes

The same rear brake drum was used 1967-1994. It is an 8" diameter cast iron drum, that fits 1-3/8 wide brake shoes. Sunny Trucks started using a different brake shoe from Oct 1989.

Specs

Linings (shoes)
- 35 x 4.8 x 195 mm (width x height x thickness)
- 1.378 x 0.189 x 7.68 inch (W x H x T)
- 1-3/8 x ~3/16 x ~7-11/16 inch (W x H x T)
Total breaking area: 273 cm² (42.3 sq. in.)
B110: (manual adjusting)
- Cylinder: 11/16" with front discs
- Cylinder: 13/16" with front drums
B310: Drum LT-20 (auto adjusting)
- Cylinder: 13/16" (20.64 mm)

1978-1989 B120 ute used rear type Drum-LT20 with front type Drum2L20.

Finned Alloy Brake Drums

The fins look like structural type, not cooling type.

quote
Datsun Competition Dept supplied it's favoured teams with many experimental parts that were never sold over the counter. 1200s had alloy drums and calipers fitted as wellas the alloy diff heads from the wagons.

Finned drums like these were offered by Datsun Competition in Japan.

Specifications

brake cylinders	B110 (disc)	1977 US B210	1980 US B310 (Disc-AN20)	1980 Canada A12A (Disc-AN18)
Proportioning valve	not used	yes	1,961 kPa x 0.4 psi	1,961 kPa x 0.4 psi
Booster (Master-Vac)	not used	?	M60 6-in diameter 135mm rod length (flange-to-pedal)	M60 6-in diameter
Master diameter	11/16 inch	3/4 inch	13/16	13/16
Front cylinder diameter	1.894 inch (drum brakes: 11/16)	2.012 inch	2.012 inch	1.894 inch
Rotor diameter	212.5 mm	245mm	245mm	220mm
Pad (width x length)	42.5 x 53.1 mm	41.2 x 63.4 mm	41.2 x 61.4 mm	42.0 x 56.8 mm
Pad thickness	10.3	10.0	10.0	10.3
Total front braking area (discs)	14.0 sq in	16.2 sq in	~14.6	~13.8
Total front braking area (drums)	42.3 sq in	n/a	n/a	n/a
Rear cylinder diameter	disc brake models: 11/16 inch (all-drum models: 13/16)	13/16 inch	13/16	13/16
Drum diameter	8.0 inch	8.0 inch	8.0	8.0
Drum width	1.378 inch	1.378 inch	1.378	1.378
Total rear braking area	42.3 sq in	42.3 sq in	42.3	42.3

Part Numbers

http://www.rockauto.com

Front Brake Hoses

Length=11" End A Size=M10X1 End B Size=M10X1
RAYBESTOS BH36892; DORMAN H96862; ACDELCO 18J2188, 18J126, 19173109

Rear Brake Hose

Length=13.188" End A Size=M10X1 End B Size=M10X1
RAYBESTOS BH36866; DORMAN H36866

Pads

Small Pad (58 mm for 212mm rotor) Fits:

1971-1973 B110
1973-1974 Civic USA
1976-1978 F10 USA
1979-1982 N10 (Datsun 310) USA
1978-May 1979 PA10 Stanza GL, GLX

Raybestos PGD104, Wearever D41, Bendix D104, Beck/Arnley 0880100D?, ACDELCO 17D104 (18028686), ACDELCO ACD39, ACDELCO ACD122

Medium Pad (for 220mm rotor) fits:

B310 A12A Canada (220mm AN18 rotor)

Beck/Arnley 0820100 Premium Organic $9.18

Large Pad (63.5 mm for 245 mm rotor) RockAuto for AN20 rotor PartsAmerica fits:

1974-1978 Datsun B-210
1975-1979 Civic USA
1977-1979 Datsun 200SX (S10)
1979-1982 Datsun 210 (B310) USA
1975-1976 Datsun 610
1975-1977 Datsun 710

Raybestos SGD117, PGD117 or RPD117, Beck/Arnley 0870944, 0820944 or 0880944D, Wearever D103, Bendix D103, ACDELCO 17D117 (18028692)

D103 also D113. KD-29, MK D1008, AK A-33K

Rear Brake Shoe

set (8 x 1-3/8, fits B110, B210 and B310)

RAYBESTOS 371PG $15.36
WAGNER PAB371 $16.52
ACDELCO 17371B $19.02
WAGNER BD60368 $39.89

Rotor

Front disc inner wheel bearing {Taper Bearing Assembly / Cone Length=0.5906 Bore=0.9843 Outer Diameter=2.0472 Width=0.6398 Cup Length=0.5118 Cone Radius=0.06 Cup Radius=0.06}
- BECK/ARNLEY 0513809 $13.61
- BCA 30205 $14.73

http://www.rockauto.com

Wheel Bearings

Rockauto.com

FRONT INNER

Same bearing is used on drum brakes and disk brake hubs.

Nissan 52 mm O.D.

40210-H1000 ASSY-BEARING FRONT WHEEL INNER from 0570
40210-18000 ASSY-BEARING FRONT WHEEL INNER to 0470
- BCA/NATIONAL 30205
- TIMKEN 30205M
- BECK/ARNLEY 0513809

Specs: Taper Bearing Assembly

Cone Length=0.5906"
Bore=0.9843"
Outer Diameter=2.0472"
Width=0.6398"
Cup Length=0.5118"
Cone Radius=0.06" Cup Radius=0.06"

FRONT OUTER

Same bearing is used on drum brakes and disk brake hubs.

Nissan 42mm O.D.

40215-H1000 ASSY-BEARING FRONT WHEEL OUTER from 0570
40215-18000 ASSY-BEARING FRONT WHEEL OUTER to 0470
- BCA/NATIONAL 30302
- TIMKEN 30302

Specs: Taper Bearing Assembly

Cone Length=0.5118"
Bore=0.5906"
Outer Diameter=1.6535"
Width=0.561"
Cup Length=0.4331"
Cone Radius=0.06"
Cup Radius=0.06"

Rear Wheel Bearings

See Axle Shaft. These are not easily replaced.

Caliper

Bore Size=1.89" Inlet Thread=M10X1 Bleeder Thread=M10X1
Right: RAYBESTOS FRC3021 $30.79, RC3021, A-1 CARDONE 19124, 17124
Left: RAYBESTOS FRC3022 $30.79, RC3022, A-1 CARDONE 19125, 17125

Parking Brake Cable

48-1/4" Overall Length, 2 Per Car
RAYBESTOS BC92888 $39.79
ACDELCO 18P154, 18033072 $48.79

Master Cylinder

Bore Size=11/16" Number of Ports=2 Primary Outlet Size=M10x1 Secondary Outlet Size=M10x1
A-1 CARDONE 111655 Remanufactured $26.79
RAYBESTOS MC39087
ACDELCO 18M1072, 19106858

B120

Front Disk Brakes from 8910. These are unique as they fit the same strut as the former drum brake setup.

Rear Drum Brake

44060-G0300 SHOE ASSY-REAR BRAKE SHOE 7510-7611
44060-G0325 7612-8910
44060-G1225 8910-
43206-18000 DRUM BRAKE-REAR

Master Cylinder

Master cylinder has two bolts in horizontal plane; previous drum brake system used two bolts in vertical plane (like B110).

Front Discs

41060-G1985 PAD KIT-DISC BRAKE [Nissan/Subaru]

41001-G1500 CALIPER ASS'Y-FRONT RH W/O PADS OR SHIMS [Floating caliper]

41121-05A10 PISTON-CYLINDER $31.23 [~1.8 inch (~45.2 mm)]
- Pulsar SE 1988-1989
- NX SR20DE, w/o abs 1991-1993
- Sentra, gasoline, wagon 1988-1989
- Sentra, SR20DE 1991-1994

47210-G1500 BOOSTER ASSY-BRAKE
40207-G1501 ROTOR-DISC BRAKE, FRONT

Disc pads

For Sunny Truck

Tokico Stopal XN289
Stopping Revolution (SR) SR289 B122 8910-
- 4996327027218, SRPF159N
Endless ES149NA
D-Speed DP071
Akebono 1216594955 Kashiyama
Akebono 1216595007
Akebono AN-31 1K (AN-311K)

Mystery

Rotor about 8"(203 mm).
- total width of backing plate: 4-5/16 inch (109.5 mm)
- Same as Subaru Justy for 12" wheel? Type 480
- not 289, 291, 311, 314

Are these the same?

108.5 mm total width x 40.3 mm x 14.7 mm thick
- ~4.272" x 1.587" x 0.579" (inch)
- 4-17/64
Interpart GBP666
- CHERRY 1.0 1.3 1.3VAN 1.5 DE 09/82 A 08/86
- CHERRY 1.5TURBO DE 09/82 A 05/84
- CHERRY 1.6 DE 09/85 A 08/86
- SUNNY 1.0 DE 06/86 A 10/88
- SUNNY 1.3 DE 05/82 A 05/89 + 1.3 KOMBI DE 05/82 A 08/90
- SUNNY 1.4 DE 10/88 A 12/90
- SUNNY 1.5 DE 05/82 A 09/88 + 1.5 KOMBI DE 09/83 A 05/86
- SUNNY 1.6 1.6COUPE DE 08/86 A 05/89
- SUNNY 1.6I 1.6I COUPE DE 10/88 A 09/90
Lockheed/Delphi LP261
Bendix 552206/552208
Bosch 986469580
Ferodo FDB293
Lucas/TRW GDB288/GDB988
Quinton Hazell BP229
Nissan 41060-01A25,41060-01A85,41060-12A25,41060-13A25,41060-13A90,41060-25A25,41060-61A86,41060-62A90,41060-62A92,41060-67A90,41060-89A90,41060-89A91,DA060-13A85
Nissan 41060-77A91AS Pulsar, carb, 1984-1985 to -0485
- Part number 41060-01A25 was superceded by part number 41060-77A91AS
Subaru 725191220 725191631 725191990 725193121

USA Nissan Pulsar 1984 2BBL carbureted
Nissan 41060-01A25
- Nissan 41060 77 A91AS
WAGNER PD233/ZD233 or MX275, GUARDIAN 61233, MONROE DX275/CX275, AKEBONO ACT275, Brake Best MKD275, Raybestos RPD266M/RPD266/PGD233/RPD233, Centric 10002750, Beck/Arnley 0891243/0871243/0821243/0881243D/0881243M
- 1983 Nissan Pulsar L4 1.6 Liter Carbureted - VIN P
- 1983-1986 Nissan Pulsar NX 1.6 Liter Carbureted
- 1987 Nissan Pulsar NX XE L4 1.6 Liter FI - VIN P (CA16DE)
- 1988-1990 Nissan Pulsar NX
- 1982-1990 Nissan Sentra
- 1984-1985 Nissan Stanza

1983 Pulsar 1.6
http://www.rockauto.com/catalog/x,carcode,1382150,parttype,1000004,EPIsubcategory[235],Front%2BBrake%2BPads,partGroup,14
BECK/ARNLEY 0821243/0871243/0881243M , GUARDIAN 65275, RAYBESTOS SGD275M/PGD275M/, WAGNER 7155A/D275/ZX275, AC/DELCO 17D275M/18028853, MONROE DX275/MX275/CMX275, AKEBONO ACT275,
http://www.rockauto.com/catalog/x,carcode,1212758,parttype,1000004,EPIsubcategory[235],Front%2BBrake%2BPads,partGroup,14
1989 Sentra 1.6

Friction Materials

FMSI 782-D41
FMSI 7059 (D41) Nissan, Honda
FMSI 7039 (D103) Nissan, Honda
- 1976-1982 Cherry
- 1980-1982 Pulsar
- 1970-1974 1200
- 1974-1976 B210
- 1979-1981 Sunny
- 1972-1979 Civic
- 1969-1970 S800
FMSI 7040 (D104)
FMSI 7064-D113

Retrieved from "http://datsun1200.com/modules/mediawiki/index.php?title=Brakes"

Brakes

Contents

Types

Calipers

Rotor Sizes

Rear Drum Brakes

Specs

Finned Alloy Brake Drums

Specifications

Part Numbers

Front Brake Hoses

Rear Brake Hose

Pads

Rear Brake Shoe

Rotor

Wheel Bearings

FRONT INNER

FRONT OUTER

Rear Wheel Bearings

Caliper

Parking Brake Cable

Master Cylinder

B120

Rear Drum Brake

Master Cylinder

Front Discs

Disc pads

Mystery

Friction Materials