User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Front Axle

(Difference between revisions)

Datsun 1200 encyclopedia | Recent changes | Edit this page | Page history | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision
Category: Front Axle And Front Suspension

Revision as of 06:17, 12 September 2007
Ddgonzal (Talk | contribs)

<- Previous diff
Current revision
ddgonzal (Talk | contribs)

Line 1: Line 1:
-The 1200s' front axle ('''spindle''') is an integral part of the [[Strut]] assembly. The spindle, '''grease catcher''', and '''knuckle arm''' (steering arm) complete the "Front axle".+The 1200's front axle ('''spindle''') is an integral part of the [[Strut]] assembly. The spindle, '''grease catcher''', and '''knuckle arm''' (steering arm) complete the "Front axle".
-Also see:+ Also see: [[Brakes]]
-* [[Brakes]]+
-* [[Front Suspension]]+
 += Overview =
 +See main article: [[Front Suspension]]
-http://datsun1200.com/modules/myalbum/photos/thumbs/4921.jpg [http://datsun1200.com/modules/myalbum/photo.php?lid=4921 Front Axle]+<img size=400>http://datsun1200.com/uploads/photos/4921.jpg</img>
 += Knuckle Arm =
 +The "Knuckle arm" (steering arm) bolts to the '''balljoint''', and the strut is bolted on top of the knuckle arm.
-The "Knuckle arm" (steering arm) bolts to the ball-joint, an dthe strut is bolted on top of the knuckle arm. Datsun knuckle arms come in two basic sizes:+See main article: [[Knuckle Arm]]
-* narrow bolt spacing for 45mm strut tubes (used by B110)+
-* wide bolt spacing for 50.8 mm strut tubes (used by most other Datsuns)+
-Additionally, the size of the taper hole for the ball joint is important.+<img size=240>http://datsun1200.com/uploads/newbb/13022_4e3cbb95cad29.jpg</img>
-* B110 uses the small taper+
-* Most others use a large taper+
- +
-Then there is the length of the arm -- long arme give a slower steering response, but less effort is required to turn the wheels. Short arms give faster response.+
- +
-The good news is there is only one size for B110. See the part numbers below.+
- +
- +
-= Part Numbers =+
-steering arm+
-<br>40052 = Knuckle Arm RH +
-<br>40053 = Knuckle Arm LH+
- +
-Knuckle Arm RH+
-* B10: 40052-18000 (different from newer models)+
-* B110: 40052-H1000, 40052-H5000+
-* PB110: 40052-H2501+
-* B120: 40052-H7400 (75-8504), 40052-H7440 (8504-)+
-* B210: 40052-H5000 (74-75 A12)+
-* B210: 40052-H7400 (1976-up A engine, except USA)+
-* B210: 40052-U0101 (USA, also PB, also L16)+
-* B310: 40052-W5000 (All US, all A15, most A14)+
-* B310: 40052-H7200 (A12, A13, and budget A14 models)+
-* B310: 40052-W5060 (big engines, 8001-up)+
- +
[[Category:Front Axle And Front Suspension]] [[Category:Front Axle And Front Suspension]]

Current revision

The 1200's front axle (spindle) is an integral part of the Strut assembly. The spindle, grease catcher, and knuckle arm (steering arm) complete the "Front axle".

Also see: Brakes

Overview

See main article: Front Suspension

Knuckle Arm

The "Knuckle arm" (steering arm) bolts to the balljoint, and the strut is bolted on top of the knuckle arm.

See main article: Knuckle Arm