User Login    
 + Register
  • Main navigation


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad

[Datsun 1200 encyclopedia]


From Datsun 1200 Club

Datsun 1200 encyclopedia | Recent changes | Edit this page | Page history | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy
Categories: Body | Fibreglass

The bonnet (hood) of the Datsun 1200 is a classic design: an elegant flat sheet with a strengthening ridge down the middle. You can use the ridge to aim it down the autobahn. For 1972 japan-market, a new style bonnet was used for all sedans & coupes, including STD, DX, GL and GX.



Original Style
740.jpgAlbum click to view 174_57c6189a7befd.jpgPost click for topic

1972 JDM
457.jpgAlbum click to view

Also see 
Hood Comparison
Front Body Panels Part Numbers
Front Fender and Front End
65100-H1000 1970-1971 ALL
65100-H1000 Van 1972
65100-H3100 Sedan, Coupe 1972

CAUTION: Hoods have the habit of looking great but with a significant spot of damage.
8057.jpgAlbum click to view

Opening the hood

Click this page of the owner's manual for details:

1972 USA Owners manual (Page 21 ... ):

th_00_cover.jpg   th_21.jpg
Pull the hood lock handle

Fit the hood prop rod like so. It is on the left side (right side of this photo):
7975.jpgAlbum click to view

NOTE: B10's prop rod was on the other side.

Early Bonnet

The type of hood used by all export 1200s (1971-2007), and for all Sunny Trucks.

65100-H1000 PANEL ASS'Y-hood

It was used in Japan as the 1970-1971 bonnet for Japan Domestic Market cars (sedans and coupe).

5271.jpgAlbum click to view 8580.jpgAlbum click to view GX 16329.jpgAlbum click to view

The hood is 48 inches wide and 36 inches long. It is nearly rectangular but has a 2.25" curve in back, with a corresponding 2.25" peak in front:
11941.jpgAlbum click to view 15301.jpgAlbum click to view

Bracing on underside:
9482.jpgAlbum click to view 13090.jpgAlbum click to view

GX Bonnet

GX 1200s used the same bonnet as STD, DX and GL 1200s.

8580.jpgAlbum click to view

Sedan 1970 Style
16329.jpgAlbum click to view

Sedan 1972 style
8350.jpgAlbum click to view

Late Bonnet

1972 Bonnet

1972 JDM 1200 Sedans and Coupes used a hood with a distinctive chevron-shaped "power boss".
174_620eefbc0e020.jpgbrochure 457.jpgbrochure

All trims — including STD and DX — used this bonnet:

This is sometimes called the "GX Bonnet", but it was fitted to all 1200s trim levels as can be seen in the factory brochure photos above.
752.jpgAlbum click to view

65100-H3100 PANEL ASS'Y-hood

If there are any actually available, you'll want to verify it has that specific design, as Nisan may consider the original style a valid replacement part. Let us know what Nissan tells you.

  • 1200 pickup/ute (B120) continued to use the older plain bonnet
  • 1972 Van (wagon) continued to use the old bonnet even while adopting the new 1972 grille

The line just below the Cowl Top Grille differs too:
24193.jpgAlbum click to view 26769.jpgAlbum click to view

3175.jpgAlbum click to view 3177.jpgAlbum click to view 3465.jpgAlbum click to view 9837.jpgAlbum click to view 9032.jpgAlbum click to view 11828.jpgAlbum click to view 17055.jpgAlbum click to view 18820.jpgAlbum click to view 18829.jpgAlbum click to view 18830.jpgAlbum click to view 18840.jpgAlbum click to view 19537.jpgAlbum click to view

24241.jpgAlbum click to view 24242.jpgAlbum click to view 24243.jpgAlbum click to view

Excellent Bonnet

Sunny Excellent 1400 (PB110) bonnet has a sharper peak and is about 50mm longer (4 inches). It is the same with at front, but a bit wider at the rear (implying the fenders are less thick at the rear).

Wider at rear | Underside looks similar with same bracing style
12016_4b6fd214ee4c2.jpgPost click for topic 12016_4b6f03faeba92.jpgPost click for topic

Hood Latch

The bonnet latch is in two parts and operated by a cable release from inside the cabin. B210/120Y latch differs from B110/1200.

See Main Article: Hood latch

Hood Hinges

65400-H1001 HINGE ASS'Y-hood (R.H.)
65401-H1001 HINGE ASS'Y-hood (L.H.)
65409-H1000 PIN-hinge 2

27169.jpgAlbum click to view 27170.jpgAlbum click to view

Pin Kits

Instead of using the stock latch, you can use racing-style pins.

Nismo 99030-RR120 Pin Kit-Hood Catch
24612.jpgAlbum click to view 24613.jpgAlbum click to view

15464.jpgAlbum click to view 1834.jpgAlbum click to view

Small Parts

  • Front edge chrome strip. See Grille Surround
    the seal is the black rubber at top of firewall:
    214.jpgAlbum click to view 214.jpg
  • 65433-H1000 Seal-hood Hinge B110, B210 $0.89
    20108.jpgAlbum click to view 22225.jpgAlbum click to view
    20106.jpgAlbum click to view

Support Rod

65510-H1000 ROD-HOOD SUPPORT 1200, 620.-7808
27289.jpgAlbum click to view

65514-H1000 65514-55W00 CLAMP-ROD,HOOD 1200, B210, 620 (フードクランプ)
25610.jpgAlbum click to view
* sold in quantity 10
* used by 1200, B210, 720, N12, C210, and more

65512-H2500 GROMMET-HOOD SUPPORT ROD B110, 620 フード グロメット 
27288.jpgAlbum click to view

Grommet goes into the core support (the pivoting end of the rod). The hole in the bonnet is non-grommetted
2131.jpgAlbum click to view

Hood Bumper

65806-H1000 BUMPER-HOOD
20107.jpgAlbum click to view 23142.jpgAlbum click to view
Cut on dotted line

Can 620 hood bumpers be adapted?
620_engine_hood_support_rubber_thin.jpg 620_engine_hood_support_rubber_thick.jpg


From April 1985, 1200s were fitted with an under-bonnet fiberglass insulation mat.



65832-F5000 CLIP-INSULATOR (8)
65832-F5000-.jpg 65832-F5000.jpg


USA 1200s have these under-hood stickers

Vehicle Emission Control Information
20394.jpgAlbum click to view 
14994.jpgAlbum click to view 
Inertial Wheel Weight
12230.jpgAlbum click to view 1973

Body Panel Alignment

20846.jpgAlbum click to view 20849.jpgAlbum click to view

Bracing Damage

See main article: Bonnet Brace Repair


Search for hoods at auction

Spectra Fibre
7002.jpgAlbum click to view

カーボン ボンネット

Carbon Fiber original style
24605.jpgAlbum click to view 24606.jpgAlbum click to view

Carbon Fibre 1972 style
24607.jpgAlbum click to view 24608.jpgAlbum click to view 24609.jpgAlbum click to view

FRP (fiber reinforced plastic a.k.a. fibreglas)
862.jpgAlbum click to view

Cooling Bonnet
24611.jpgAlbum click to view 24610.jpgAlbum click to view 12679.jpgAlbum click to view

FRP (fiberglass) with cold air induction
9860.jpgAlbum click to view

Side Opening

17740.jpgAlbum click to view 

Retrieved from ""

This page has been accessed 53,357 times. This page was last modified 01:24, 18 February 2022. Content is available under Datsun 1200 Club.